Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 776-0707
Pro Vinyl and Aluminum Fencing installs and custom-fabricates vinyl and aluminum fencing for Cupertino, built to the height and style your yard calls for.
Licensed, rated 5.0 from 500+ reviews, we fit Cupertino’s flat valley and hillside lots alike. Get your free estimate today.


Pro Vinyl and Aluminum Fencing installs and custom-builds vinyl and aluminum fences for Cupertino homes, any height.
Cupertino homeowners across the flat valley floor and western foothills get vinyl’s budget-friendly value or aluminum’s modern premium look, matched to their yard. Every estimate is honest, every install carries a real warranty.
Cupertino runs from the flat valley floor near De Anza College and Stevens Creek Boulevard to sloped foothill lots toward the Santa Cruz Mountains, and both settings need fencing fitted to the actual property.
Pro Vinyl and Aluminum Fencing installs and custom-fabricates both materials for Cupertino homes: vinyl for budget-friendly value, aluminum for a modern, premium look. You pick the material for your yard and your budget. Then we fit the fence to the height and terrain your property has.
Vinyl comes in a full style range for Cupertino yards: privacy panels for a solid screen along a rear or side line, picket styles for an open front-yard look, wall toppers at 2 or 3 ft for an existing block wall, and combination styles pairing a privacy base with a picket or acrylic top.
Every style is custom-fabricated from 2 to 8 ft, so a flat De Anza-area lot and a stepped foothill lot both get a fence sized to the actual grade, down to a single small job or repair section.

Aluminum is our premium option for Cupertino: a modern, architectural look in powder-coated panels, priced above vinyl for homeowners who want a cleaner, contemporary line. Custom fabrication takes aluminum from 2 to 12 ft, with 6 ft the typical starting height before we fit it to your yard. Vinyl and aluminum aren’t competitors here; they’re two honest paths: choose vinyl for value, aluminum for a premium modern finish.
A handful of factors move the price of a Cupertino fence: material, height, total length, gate count, and whether an old fence needs removal first. A flat lot near Stevens Creek Boulevard installs differently than a sloped foothill lot needing stepped panels and extra grading, and that terrain difference is a real cost factor here. Phone ballparks are free; a firm number comes only after we’ve seen your property.
Vinyl fencing carries a transferable limited lifetime warranty; aluminum carries 20 years on the material, 10 years on the coating, and 2 years on steel components. Pro Vinyl and Aluminum Fencing backs every install with its own 5-year workmanship warranty on top. That sits alongside a 5.0 rating from 500+ five-star reviews, 2,000+ completed projects, and 100,000+ ft installed since 2018.
Our vinyl and aluminum work in Cupertino covers the full range, from privacy fencing through gates and wall toppers built to the wall they sit on.
Custom fabrication opens a door: colors can change from one section to the next, and a body color paired with a contrasting frame gives you a two-tone run. Vinyl carries the depth for that. Aluminum stays deliberately narrow.
The color lives in the vinyl itself rather than sitting on top of it, so a scrape from a garden tool never flashes pale and years of sun never yellow it. Three families hold that: flat solids, smooth grains, deeper textures.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Aluminum asks less of you. Two neutrals and a grain option cover the flat and slat profiles; the contoured profile is matte black and stays that way. Nothing custom today, so we never promise a match to house trim.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
Custom heights are ordinary work for us, so fabrication is rarely the ceiling. The limit comes from the style you picked, the slope and sightlines of your own yard, and what the city code allows. Three inputs, one figure.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Vinyl and aluminum fences installed in and around Cupertino show up here in real photos, from privacy panels to modern aluminum lines, fitted to Cupertino’s flat and hillside lots alike. Flip through the styles, colors, and heights, then reach out for your own free estimate.
Cupertino sits in Santa Clara County, at the southern edge of the San Francisco Bay Area, where the Santa Clara Valley meets the foothills of the Santa Cruz Mountains. The city incorporated on October 10, 1955, becoming the county’s 13th city, and today counts roughly 60,381 residents.
Longtime neighborhoods like Monta Vista, Rancho Rinconada, Garden Gate, Seven Springs, and Oak Valley mix flat suburban tracts with sloped foothill lots, so a Cupertino fence project can mean a straight run along a level backyard or a stepped installation on a real grade change.
Cupertino caps front-yard fencing at 3 ft within the street setback. Side and rear property lines allow up to 7 ft without neighbor approval or a building permit; going to 7-8 ft needs both neighbor approval and a permit, and 10 ft is the absolute maximum anywhere on a residential lot.
These thresholds come from Cupertino Municipal Code Chapter 19.48, section 19.48.030. Vinyl and aluminum fencing gets custom-fabricated to whatever height the code allows for your lot.
The numbers above cover the standard residential table. Hillside lots in Cupertino’s Residential Hillside and Open Space zones carry modified fence rules under section 19.48.030(F), and every project should be verified with the City of Cupertino Community Development Department before work begins.
Flat valley-floor lots near De Anza College and Stevens Creek Boulevard take a standard fence run with minimal grading. Sloped western foothill lots, closer to Monta Vista and Oak Valley, often need stepped panels and custom grade fitting to follow the terrain cleanly.
Some western Cupertino properties also sit in a fire hazard severity zone that requires 30 ft of defensible space around structures, a vegetation-clearance rule, not a fence-material mandate.
Every Cupertino project runs the same honest path: a local visit to your property, a clear written contract, a clean install built for your yard’s actual terrain, and a real warranty handed over once all the work is fully done.
We talk pricing openly from the first call, with no surprise add-ons and no pressure to sign on the spot.
We give a phone ballpark first, then a firm number after seeing your property’s terrain and old fence.
Materials, height, style, and warranty terms go into a written contract before work starts, nothing left to guess at.
Our crew removes the old fence, preps the ground for your terrain, and installs cleanly, leaving the property tidy.
PVAF registers your warranty and hands it over at completion, with aftercare guidance for years of performance.

Practical Cupertino fencing advice, from choosing a material to navigating local permit rules, sits below.
Locking hardware and a solid vinyl panel turn this rolling gate into a real security barrier that resists fading and cracking.
Fences blog
Fencing in Cupertino: Your Questions Answered
Quick, honest answers on Cupertino’s fence height limits, permit thresholds, what actually drives your cost, custom-fitted heights for hillside lots, and which South Bay neighborhoods we cover, all gathered here before you ever need to pick up the phone.
Still have a question?
Reach out for a free, no-pressure conversation about your project.
Front-yard fences top out at 3 ft within the street setback.
Side and rear property lines allow up to 7 ft without a permit, 7-8 ft with neighbor approval and a building permit, and 10 ft is the absolute cap anywhere on the lot. Always verify your exact zone with the City.
Fences up to 7 ft on a single-family lot generally do not need a building permit.
Going higher, up to the 10 ft cap, requires neighbor approval and a permit, and hillside Residential Hillside or Open Space zones add their own rules. Verify with the City of Cupertino Community Development Department.
Material, height, total length, gate count, and whether an old fence needs removal all move the price, and so does terrain: a sloped foothill lot costs differently than a flat valley-floor lot.
A quick call gets you a ballpark; a firm number comes only after we see the property in person.
Yes.
Vinyl fencing is custom-fabricated from 2 to 8 ft and aluminum from 2 to 12 ft, both fitted to the slope and grade changes common on Cupertino’s western hillside lots rather than forced into a stocked standard height.
We serve all of Cupertino, including Monta Vista, Rancho Rinconada, Garden Gate, Seven Springs, and Oak Valley, plus nearby South Bay communities, with an estimate response the same business day.
Some Cupertino communities, including planned developments like Seven Springs, set their own style and height rules through an HOA on top of city code. Check your community’s CC&Rs before you build.