Vinyl Solid Patio Covers
Solid patio covers close the roof completely, built for full shade and real rain protection, not filtered sun.
Call Now: (844) 744-0707
A vinyl patio cover turns a bare slab into shade you can actually use. It keeps sun and rain off your table, opens up year-round outdoor living, and skips the yearly sanding and staining that a wood cover always demands.
We are a licensed local installer and custom fabricator, not a kit seller. Each cover is built to the exact size of your yard. You choose between vinyl and aluminum with honest guidance, we take out the old rotting wood cover if you have one, and the on-site estimate is free.


A kit ships in a box and leaves the hard part to you. We measure your patio, fabricate the cover, and install it to code.
You get the product depth of a specialist and the accountability of an insured local crew: four vinyl styles, White or Tan, honest guidance on choosing vinyl versus aluminum, and a clear answer on permits.
A patio cover is a permanent roofed structure over your patio, also called a patio roof or pergola, that adds shade, rain protection, and outdoor space. It ties into the house or stands on its own posts. Vinyl is a US-made PVC that will not rot, warp, or need repainting the way wood does, and every cover is cut to your patio’s measurements, not a stock kit’s.
Four vinyl patio cover styles make up the line, each sized to your dimensions:
Want a more specific or fully custom build? The related covers below point you to the right one. For most people the first real decision is attached or free-standing:
| Consideration | Attached | Free-standing |
|---|---|---|
| Where it sits | Ties into the house | Stands alone on posts |
| Permit in LA | Always needed | Depends on the size |
| Best for | A door or patio slab | A detached deck |

The case for vinyl is comfort and upkeep. It will not rot, warp, crack, or peel, and it never needs paint or stain. Two things people notice: it is quieter than aluminum in rain, and it stays cooler to the touch in the sun. Hose it twice a year with mild soap and that is the whole maintenance plan.
Both are low-maintenance and hold up outside. The right pick comes down to budget, look, and how harsh your sun gets. Vinyl is the budget-friendly choice, quieter in rain and cooler underfoot. Aluminum is the premium option: a longer raw lifespan in strong sun and a modern look. Because both lines are ours, the guidance stays honest.
| What matters | Vinyl | Aluminum |
|---|---|---|
| Feel outdoors | Cooler, quieter | Warmer, louder |
| Look | Classic, clean | Modern, premium |
| Budget | Budget-friendly | Priced above vinyl |
Leaning toward metal? Our aluminum patio covers carry that line in full.
Quality UV-protected vinyl in a light color holds up well in Southern California sun. We build in White and Tan for a reason: light colors reflect heat, stay cooler, and hide age. The material carries a transferable limited lifetime warranty, plus our 5-year workmanship warranty on the install. The honest part: in extreme all-day sun, aluminum edges vinyl on raw lifespan, which is why we show you both first.
Usually, yes. Unlike a fence, a roofed patio cover is a structure that most cities treat as one. In the City of Los Angeles, any attached cover needs a building permit, and a detached cover over 120 square feet does too; a smaller detached one can be exempt.
Los Angeles County follows a similar 120-square-foot line. In the Bay Area, thresholds vary from one city to the next, so verify with your local building department before you build.
A lot of our patio work starts by tearing out wood past its prime. We remove the old rotting cover or pergola, fabricate the vinyl replacement to the same footprint or a better one, install it, and clean up before we leave. Most swaps wrap in about two days, and because we fabricate in-house, small or odd-sized jobs are no trouble.
Cost depends on a handful of factors, not a sticker price. The ones that move it:
You get a real number after a free on-site measure, and financing through Synchrony starts at zero down.
Two shades, and heat is the reason. A cover sits over you in full sun all afternoon, so the finish gets chosen for what it reflects rather than what it matches. Light tones stay cooler overhead and show weather less than a dark one would. Shorter list than the fences, deliberately.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Overhead structures are one half of what we build outdoors. Boundary work is the other: privacy runs, picket lines, gates cut to the opening, toppers that sit on block wall you already own. Same shop, same crews on site.
Every cover in this gallery is a real project our crew fabricated and installed, from simple backyard shade to full wood-cover replacements. Browse finished vinyl patio covers and pergolas, then open the full gallery to see the rest of our work.
From the San Fernando Valley to the coast, we build custom vinyl patio covers for Greater Los Angeles and Ventura County backyards. The crew measures your patio, fabricates the cover to fit, and installs it to LA code so it clears inspection. Book a free on-site measure and we take it from there.
The same custom fabrication and install work reaches Bay Area homes: covers and pergolas sized to your yard, in vinyl or aluminum. Permit rules shift from one Bay city to the next, so verify the thresholds with your local building department. Same crew, same warranty, same straight answers.
Every patio cover follows the same four steps, and none hide a surprise. It starts at your patio with a tape measure and ends with a warranty in your hand. In between, you get a clear contract and a crew that builds to code and cleans up.
No pressure at any step, and no charge until you have seen the full scope and a real, honest number.
We measure your patio, talk through style, material, and permits, and answer every question right there on the spot.
You get the full scope in writing, no pressure and no hidden line items, with financing offered if you want it.
We tear out any old wood cover, fabricate your vinyl cover in-house, and install the whole structure to code.
Your install carries a transferable limited lifetime material warranty plus our own 5-year workmanship warranty.

Practical guides on patio cover materials, permits, and care, written by the crew that builds them.
Vertical privacy fencing sets panels edge to edge, cutting sightlines, noise and wind in one continuous run.
Fences blog
Vinyl Patio Cover Questions, Answered Straight
A patio cover is a real decision: material, permits, sun, cost. These are usually the questions we hear from homeowners weighing one, answered as plainly as we would answer them over the phone. If yours is not here, ask us directly and we will get back to you the same business day.
Still weighing it up?
Get a free on-site estimate and we will get you on the schedule.
Usually, yes. A roofed patio cover is a structure, so in the City of Los Angeles any attached cover needs a permit, and a detached one over 120 square feet does too.
LA County follows a similar 120-square-foot line, and Bay Area rules vary by city. Verify with your local building department.
It comes down to your budget, the look you want, and your sun. Vinyl is more budget-friendly, quieter in rain, and cooler underfoot.
Aluminum costs more but has a longer raw lifespan in strong sun and a modern look. Because we install both, ask us to walk through your specific patio.
Quality UV-protected vinyl in a light color holds up well in Southern California sun, and ours carries a transferable limited lifetime material warranty plus a 5-year workmanship warranty.
In the most extreme all-day sun, aluminum lasts longer on raw material, which is why we show you both first.
White and Tan, and that is the full menu. Both are light shades that reflect heat, stay cooler overhead, and hide weathering better than a dark color would.
It is a smaller palette than our fences carry, on purpose: a patio cover sits in full sun all day, and light colors wear better up there.
Yes, and it is one of our most common jobs. We remove the old rotting wood cover or pergola, fabricate your vinyl replacement in-house, install it, and clean up the site.
Most swaps take about two days. Because we fabricate ourselves, odd sizes and small jobs are no problem.
Size, whether it is attached or free-standing, the style, site prep and footings, and the material all move the number.
There is no sticker price because no two patios are the same. You get a real figure after a free on-site measure, with financing through Synchrony starting at zero down.