Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 776-0707
Danville’s sloped lots and valley wind call for a vinyl or aluminum fence racked true to the grade, built to hold its line through fire season and storms alike.
Since 2018 our crew has fabricated and installed custom fencing across Contra Costa County, licensed and backed by real warranty terms.


Danville homeowners call us for privacy panels that hold a slope, pool enclosures, and gates sized to wide driveways.
Lots in the San Ramon Valley slope differently block to block, so panels get racked to the grade instead of stepped, and metal inserts handle valley wind without changing how the fence reads from the street.
Danville sits in an inland pocket of the East Bay where afternoon wind funnels down the valley and summer brings real fire risk. The town carries a Very High Fire Hazard Severity Zone designation, and that changes what a fence needs to do beyond mark a property line.
Vinyl privacy panels here often ship with metal inserts: vinyl on the outside, steel framing inside the rails, so the fence takes valley gusts without the panel flexing loose over time. Aluminum earns its keep on the modern lots around Blackhawk and Greenbrook, where clean lines and powder-coated finishes suit newer architecture.
Danville work clusters into a few types. Full-privacy vinyl screens a back yard on a sloped lot. Semi-privacy and picket styles suit a front yard that still wants its landscaping on show. Pool-code enclosures go around the many backyard pools in town.
Aluminum privacy and semi-privacy runs draw a more architectural line. Wall toppers add height and screening on top of an existing block or concrete wall, with no demolition involved. Gates are sized to match: a narrow walk gate one place, a wide driveway span another.
Every estimate is free and on-site, but the factors that move a number are consistent: total footage, fence height, material choice between vinyl and aluminum, how many gates and what width they span, whether the lot’s slope adds racking work, and whether a tired old fence has to be hauled off first. A call gets you a rough range; a site visit gets you a real one.
Danville’s fencing rules live in Municipal Code Section 32-22.11. Front yard fences top out at 3.5 feet in the primary front setback, with 6 feet allowed in a secondary front yard, and side and rear fences generally follow the 6-foot line.
The permit threshold for fence height above these limits was not published in the public sources reviewed [NEEDS-DATA: Danville permit threshold], so confirm the figure with the Danville Building & Planning Department before you plan anything tall. Inside an HOA community such as Blackhawk, association rules can be stricter than the town code, and the stricter rule wins.

From the village core along Hartz and Prospect Avenues out to Shadow Creek, Magee Ranch, Greenbrook, Blackhawk, Sycamore, and Alamo Creek, lot shapes and setback quirks vary enough that a phone quote is always a starting point, not a final number. Homes near Oak Hill Park and the Iron Horse Trail tend to run larger backyards, which is where wall toppers and long privacy runs do the most work.
A pool enclosure, a privacy panel and a driveway gate belong to one project, and matching gates exist in every style and color we build, so nothing has to clash. Vinyl holds the broad palette. Aluminum holds the narrow one.
Sorted into three groups: four plain solids, six smooth grains, four TimberGrain textures. The textured group, Sierra Blend and its siblings, breaks light up across the face instead of bouncing it straight back at you.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Four finishes, no more, and not one of them custom. Flat and slat styles take black, white or a grain; contoured slats are matte black only. All four are powder coat, cured hard onto the metal rather than painted over it.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
A pool enclosure answers to code, a hillside screen answers to grade, and a front picket answers to what the town allows out by the sidewalk. Fence type first, then the yard, then the rule. Those three meet in the table.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Browse completed vinyl and aluminum installs from Danville lots and the surrounding San Ramon Valley, from sloped-yard privacy panels racked true to the grade to wall toppers set on existing block and concrete walls all around town and beyond.
Danville incorporated as a town on July 1, 1982, and sits in Contra Costa County with a population of 43,582 as of the 2020 census. It borders San Ramon and anchors the San Ramon Valley portion of the East Bay, with a compact village core along Hartz Avenue, Prospect Avenue, Railroad Avenue, and Front Avenue that reads more small-town than suburban tract.
Danville carries a Very High Fire Hazard Severity Zone designation, and its hillside lots slope enough that a fence line rarely runs level for long. Both conditions change how a fence gets built here: framing gets racked to the grade rather than stepped, and material choices lean toward vinyl and aluminum precisely because neither one adds fuel the way an aging wood fence can.
Residential areas span Shadow Creek, Magee Ranch, Greenbrook, Blackhawk, Sycamore, and Alamo Creek, with Hap Magee Ranch Park, Diablo Vista Park, the 43-acre Oak Hill Park, Creekside Park, Alamo Creek Park, and the Iron Horse Trail giving the town its open, recreation-heavy feel.
Danville Municipal Code Section 32-22.11 sets front yard fences at 3.5 feet in the primary setback and 6 feet in a secondary front yard, with side and rear fences generally held to 6 feet.
The permit threshold above those heights isn’t published in the public sources reviewed here [NEEDS-DATA: Danville permit threshold], so verify current figures with the Danville Building & Planning Department, and check your HOA’s CC&Rs if you’re inside a governed community like Blackhawk.
A Danville install runs through the same four stages every time, whether the lot is a flat village-core parcel or a graded hillside near Blackhawk: measure, agree on paper, build to code, and stand behind the work for years after.
Nothing about the sequence changes for a bigger yard or a taller fence, only the numbers inside it.
A salesman walks the slope, checks the fire zone, and measures footage before quoting a real figure.
Materials, colors, heights, gate count, and timeline are written down before the crew ever shows up, so the price holds.
The crew sets posts to the grade, racks panels true, hangs gates, and hauls the old fence away when one comes down.
Vinyl’s warranty transfers with the house for life, aluminum holds 20 and 10 year terms, backed by 5-year workmanship.

Reads on slope racking, fire-zone materials, and keeping a vinyl or aluminum fence looking new for years.
Vertical picket fencing in Los Angeles trades painting and staining for a boundary that never needs either.
Fences blog
Danville Fence FAQs: Codes, HOAs, and More
Danville’s slope, fire-zone status, and HOA-governed neighborhoods like Blackhawk raise questions that a generic fencing FAQ never covers, so here is what actually comes up during free on-site visits across the San Ramon Valley, from Blackhawk to Alamo Creek.
Still Have a Question?
Send a message or call and a real person answers, same business day.
Danville Municipal Code Section 32-22.11 caps a primary front yard fence at 3.5 feet, with 6 feet allowed in a secondary front yard.
Side and rear fences generally run to 6 feet. Always verify current figures with the Danville Building & Planning Department before finalizing plans.
Danville carries a Very High Fire Hazard Severity Zone designation. Vinyl and aluminum do not add fuel the way aging wood can, which is why both materials are common choices here.
Confirm any zone-specific building requirements with the Danville Building & Planning Department.
If your property sits inside an HOA-governed community such as Blackhawk, association CC&Rs can set rules stricter than the town code, and the stricter rule applies.
Check your HOA’s current guidelines before ordering materials.
Municipal Code Section 32-22.11 sets the height limits, but the specific permit threshold for fences above those limits isn’t published in the public sources reviewed.
Verify the current threshold directly with the Danville Building & Planning Department before planning a taller fence.
Yes. In windy stretches of the San Ramon Valley we build vinyl panels with metal inserts, steel framing hidden inside the rails so the fence keeps its line under gusts.
Panels also get racked to follow a sloped grade rather than stepped.
Yes, from the village core along Hartz and Prospect Avenues out to Shadow Creek, Magee Ranch, Greenbrook, Blackhawk, Sycamore, and Alamo Creek.
Lot shapes vary enough across town that a free on-site visit is the fastest way to a real number.