Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
You get a fence built for Altadena’s foothills and its county rules, from a team that installs and custom-fabricates both vinyl and aluminum.
Fencing at any height, on flat lots or slopes, backed by real warranties. Ask for a free, no-pressure estimate and a straight answer.


Altadena sits in the San Gabriel foothills, and a fence here has to answer to canyon wind, sloped lots, and county rules.
Across Altadena and the nearby San Gabriel Valley, we install and custom-fabricate vinyl and aluminum fencing. You pick the material and height, and we build it, clean up, and back the work with warranties you can hold us to.
Altadena is an unincorporated community in the San Gabriel foothills, directly north of Pasadena, and fencing starts with knowing the terrain. You have two materials to choose from, and the right one depends on your budget, your look, and your yard.
Vinyl is the value-friendly workhorse that never needs paint. Aluminum is the premium, modern pick with clean lines. We fit both to the property and build to the height your lot and the county allow.
Vinyl is the budget-friendly choice that holds up without the upkeep, in privacy, semi-privacy, picket, and ranch-rail styles from 2 to 8 feet tall. It never yellows in the sun, it does not rot, and cleaning is a rinse twice a year.
For foothill lots where canyon wind matters, we set metal inserts inside the posts: it looks like vinyl outside, but there is steel inside, so it takes any realistic wind this area gets. Colors run past ten, including tones that read like wood.

Aluminum is our premium line, built for a clean, modern look that suits contemporary homes and hillside views. It powder-coats to a durable finish, resists rust the way steel cannot, and installs from 2 to 12 feet, with 6 feet the common choice. Because it is a metal, aluminum is non-combustible, a fair point in a foothill community close to open wildland. Like vinyl, it needs no painting, just an occasional wash.
Price comes from a handful of things: the material, the height, the total length, the slope and terrain the crew works, the number of gates, and whether an old fence needs tearing out first. We can give you a ballpark over the phone, but a real number takes a visit to read measurements and ground conditions. Small jobs are welcome, not just full perimeters, and the estimate is free with no pressure to sign.
Vinyl carries a transferable limited lifetime warranty, and aluminum carries a 20-year material, 10-year coating, and 2-year steel-component warranty, with our own 5-year workmanship warranty on top of both. We have built fences since 2018, we belong to the American Fence Association, and we hold 500+ five-star reviews and a 5.0 rating from LA-area homeowners.
From full privacy runs to modern aluminum yard fencing, driveway and walk gates, pool-code barriers, and custom heights fabricated to spec, we cover the fencing an Altadena property actually needs. Ask which of those fits the line you are trying to close and we will tell you straight.
Sloped ground puts a run in view from the street and from the houses above it, so a tone gets judged twice. Vinyl and aluminum answer that differently, and the material you settle on sets how wide the choice runs.
Canyon light goes flat one hour and hard the next, which is when surface starts to matter. Four plain solids keep things quiet, clay and white included. Wood grain tones read like milled board. TimberGrain adds texture you can feel.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Metal trades range for hold. Slatted and solid panels give two plain tones plus one that mimics grain, and the contoured slat allows matte black alone. Powder coat cured under heat is why a foothill afternoon never dulls it.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
Two ceilings argue on a hillside: what the style itself can reach, and what the county allows on that line. Between them sits the yard, how steep it runs and how much of it needs covering. The table holds the spans per style.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Every fence in this gallery is our own work, vinyl and aluminum, privacy runs and modern yard fencing, gates and custom heights. It shows the finish, the colors, and the styles we build in and around Altadena. Flip through the images and picture the same on your property.
Altadena is a large unincorporated community in Los Angeles County, about 43,000 residents in the San Gabriel foothills, just north of Pasadena. Because it is unincorporated, there is no city hall, and the LA County Board of Supervisors governs, advised by a Town Council.
Settled in 1887, it sits between the Arroyo Seco and Eaton Canyon. Altadena is also rebuilding after the January 2025 Eaton Fire, and many homeowners are still putting things back together.
Because Altadena is unincorporated, fence heights follow LA County Title 22, not a city ordinance. The required front yard is capped at 3.5 feet (42 inches), while side and rear yards generally allow up to 6 feet. A taller run is custom work, and we fabricate to the height your project needs.
Everyday wind here is mild, but Altadena sits right below the mountains, where fall and winter can bring strong downslope canyon winds. That is the load a fence must plan for, so on exposed lots we use metal-insert vinyl and anchored aluminum. Close to open forest, aluminum is a non-combustible metal to weigh. No fence stops a wildfire, but sound materials and proper anchoring are the sensible baseline.
California’s Good Neighbor Fence Act (Civil Code 841) presumes neighbors split the cost of a boundary fence equally, after 30 days’ written notice. For a pool, state barrier rules apply: at least 60 inches tall, gaps too small for a child, and self-latching gates, with vinyl a good non-climbable barrier. Where CC&Rs apply, check them, though Altadena is largely non-HOA.
A residential fence up to 6 feet needs no building permit in unincorporated Altadena, but a permit applies once it goes over 6 feet, and retaining walls follow separate rules. Because Altadena is unincorporated, that office is LA County, not a city desk. Confirm what applies to your lot with LA County Building & Safety.
Getting a fence should be the easy part. From the first call to the last panel, we keep it plain and honest, so you always know the price, the timeline, and what happens next. Here is how a typical Altadena project runs.
Four steps, no surprises, and a free estimate to start. You can stop at any point before you sign.
A ballpark over the phone is easy, but the real number needs a visit, where we measure your lot’s slope and soil.
You get scope, price, materials, and timeline in writing before work starts, so nothing is a surprise later.
Our crew sets posts for your ground and grade, builds to code and height, and racks panels to your slope.
You get a fence backed by material and 5-year workmanship warranties, and we are here after the install.

Vinyl or aluminum, and how county rules affect your plan? Our guides break down the choices before you commit.
Acrylic panels screen a Los Angeles yard from view while still letting daylight through.
Fences blog
Frequently Asked Questions About Altadena Fencing
A few things Altadena homeowners ask us most, from county fence rules and permits to canyon wind and rebuilding after the Eaton Fire. If your question is not here, just ask, and you will get a straight answer the same business day, not a runaround, ever.
Still have a question?
Reach out for a free estimate and a real answer, no pressure to sign.
Yes. Altadena is unincorporated, so fences follow LA County Title 22, not a city ordinance.
That means 3.5 feet in the front yard, up to 6 feet on the sides and rear, and a permit once you go over 6 feet. Always confirm your parcel with LA County Building & Safety.
In the required front yard, LA County Title 22 caps a fence or wall at 3.5 feet, which is 42 inches. Side and rear yards generally allow up to 6 feet.
Corner lots also have sight-distance limits near driveways and intersections, so the exact line can vary by parcel.
Cost comes from the material, height, total length, terrain and slope, the number of gates, and whether an old fence needs removal first.
We can ballpark by phone, but a real number takes a site visit. The estimate is free, and small jobs are welcome, not just full perimeters.
Yes. Many Altadena homeowners are rebuilding after the January 2025 Eaton Fire, and a new fence is often part of that.
We are glad to help, at whatever pace suits you, with a free, no-pressure estimate. Non-combustible aluminum and wind-reinforced vinyl are honest options for this setting.
Everyday wind here is mild, but the foothills can see strong downslope canyon winds in fall and winter.
For exposed lots we use metal-insert vinyl, which looks like vinyl but has steel inside, along with properly anchored aluminum. Both are built to handle the realistic wind this area gets.
Yes. We cover all of Altadena and the nearby Greater LA and San Gabriel Valley communities, Pasadena included.
Wherever you are in the foothills, from neighborhoods near Eaton Canyon to the Arroyo Seco side, reach out and we will set up a free estimate.