Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
Get a vinyl or aluminum fence built for your Bellflower yard, sized to the city’s front-yard and side-yard limits and set straight on a flat, tight lot.
You get a licensed, 5.0-rated crew, an honest estimate up front, and a fence that never needs paint. Your free quote is one call away.


Across Bellflower, we build and install vinyl and aluminum fences, custom-fabricated to any height the lot and the city’s code allow.
From a solid privacy screen to a clean run of modern aluminum, the fence gets matched to your yard and your budget. Count on a straight quote, a build meant to last, and the warranty in writing before any work starts.
For Bellflower homes, we install and custom-fabricate fences in two materials, vinyl and aluminum. The city is flat and tightly built, close-set tract homes off Bellflower Boulevard where property lines run close and a clean fence matters to both neighbors. So every fence gets sized to your lot, not a stock panel trimmed to fit.
Vinyl handles most of what a Bellflower yard needs: privacy, curb appeal, and a surface that never yellows or asks for paint. The style range is wide:
Heights are custom from 2 to 8 feet, matched to the city’s limits: a 42-inch front picket, a 48-inch semi-open front, or a solid 6-foot side and rear. For the dry Santa Ana days that reach the basin, a hidden metal insert puts steel inside the vinyl, enough for realistic wind here.

Aluminum is the premium line for a home after a cleaner, more architectural edge. It resists rust and never needs repainting, and it runs from open picket to full privacy screens, with welded driveway and rolling gates that are automation-ready. Custom heights run 2 to 12 feet, 6 feet the usual pick, with wind engineering beyond what a flat lot ever needs.
There is no flat sticker on a fence; the number tracks your project. It shifts with the material, the height and length of the run, gates, old-fence removal, and site access. On Bellflower’s tight, built-out lots, working between the houses shapes the layout and the labor. Expect a phone ballpark first, then a firm written figure once we walk the property, free and with no pressure to sign.
Vinyl fences carry a transferable limited lifetime warranty, so coverage passes to the next owner if you sell. Aluminum is backed 20 years on the material, 10 on the powder coating, and 2 on the steel parts, held valid by documented cleaning twice a year.
On top of either, we add our own 5-year workmanship warranty. Also on record: in business since 2018, a member of the American Fence Association, and a 5.0 rating from Greater LA homeowners across 500+ five-star reviews.
Bellflower jobs run across our whole vinyl and aluminum lineup: privacy panels, picket, gates in either material, pool enclosures, and toppers that raise an existing block wall.
One tone can run a whole property. Every style is made in matching colors, gates included, so a picket line out front and a privacy panel behind the house never read as two projects. Which material goes where sets the list.
Scrape a vinyl panel and nothing pale shows underneath, because the color goes through the material. Three families divide it: four even solids, six smooth grains such as Dark Walnut and Mesquite, four blends with a broken tone.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Aluminum will not chase a trim color. All four finishes are powder coat, and none of them is custom. You can have black, you can have white, or you can have the wood grain look. Order a contoured slat and matte black is what it wears.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
Height gets fabricated here, not pulled off a shelf, so the number comes from the job. What the table shows is how far each style stretches. What it cannot show is your ground, or the ceiling this city sets for your line.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Have a look at vinyl and aluminum fences installed in and around Bellflower, in the colors, styles, and heights local homeowners actually pick. From a private backyard screen to a low front-yard line, flip through the gallery for ideas, then start a free quote when one clicks.
Bellflower sits in the Gateway Cities of southeastern Los Angeles County, a flat, low-lying city about 34 feet above sea level, just west of the San Gabriel River channel. Dutch dairy farmers settled it around 1900, and the old dairy hub earned the nickname Cream City, while its name traces to the Belle Fleur, or bellflower, apple.
Incorporated in 1957 as California’s 348th city, it now packs about 79,190 residents into roughly 6.1 square miles, so fences here run along close, shared lines on level ground.
In a required front yard, a fence tops out at 42 inches, or 48 inches if the part above 24 inches is at least 50 percent open. Side and rear yards reach 6 feet, and anything over 6 feet needs a building permit (BMC 17.72.060). Corner lots keep a 5-foot by 5-foot sight triangle clear near driveways. Because we custom-fabricate, we build to the exact height the code allows. Rules can change, so verify with the City first.
Chain link is not allowed in front and street-side yards in Bellflower. The code (BMC 17.72.060) does permit wood, vinyl, aluminum, brick, and stone out front, so vinyl and aluminum are the two we build for a compliant front yard. Confirm the rules for your address with the City.
On Bellflower’s close-set lots, most fences sit on a shared property line, and California’s Good Neighbor Fence Act (Civil Code 841) presumes adjoining owners split the cost equally, after 30 days’ written notice. State pool law sets a barrier at least 60 inches tall with self-closing, self-latching gates, and vinyl is an approved non-climbable material. An HOA’s CC&Rs may add rules on top of city code, so read yours.
Bellflower’s fence rules can change and turn on lot specifics and zoning. A residential fence over 6 feet needs a building permit; lower front-yard and standard side or rear runs generally do not. Confirm the rules for your address with the City of Bellflower before you build.
Your Bellflower fence moves through four steps, from the first call to the final walk-through: a free on-site estimate, a written contract that locks scope and price, a careful install, and your warranty handed over at the end. No surprises.
The money talk happens up front, in plain figures you can plan around, and never with pressure to sign that day.
A ballpark by phone first, then a firm number once we see your Bellflower lot, its access and any old fence.
Scope, materials, height, timeline, and warranty all go in writing, so nothing about the job surprises you later.
The crew clears the old fence, builds to your allowed height, and hauls off the debris, leaving the site clean.
Your coverage gets registered and handed over in writing, and we stay reachable if a question comes up down the road.

Practical fencing advice for Bellflower owners, from materials to the local rules. Browse the guides below.
Once a patio furniture cover comes off, the cushions and frame underneath are already clean and ready to sit on.
Fences blog
Fencing in Bellflower: Your Questions Answered
Straight answers to what Bellflower homeowners ask most: how tall a front-yard fence can be, why chain link is out front, when a permit kicks in over 6 feet, what usually drives cost on a tight lot, and who pays for a shared fence. Not seeing yours? Ask us, and you will get a real answer.
Still have a question?
Reach out for a free, no-pressure chat about your fence and your lot.
In a required front yard, a fence can reach 42 inches, or 48 inches if the portion above 24 inches is at least 50 percent open.
Side and rear yards can go up to 6 feet. Rules can change, so verify your height with the City of Bellflower before you build.
No. Bellflower’s code prohibits chain link in front and street-side yards.
Wood, vinyl, aluminum, brick, and stone are all allowed, and vinyl or aluminum are the two we build for a compliant front yard. Confirm the material rules for your address with the City before you plan.
Yes. A residential fence over 6 feet needs a building permit in Bellflower, and front-yard limits sit lower than that.
At or under 6 feet on a standard lot usually does not. Rules can change and depend on your address, so verify the details with the City of Bellflower before you start.
Cost moves with the material, the height and length of the run, gates, old-fence removal, and site access, and tight, built-out Bellflower lots can affect how a crew works between the houses.
There is no set price list. You get a phone ballpark, then a firm written number after we walk the property.
Under California’s Good Neighbor Fence Act, adjoining owners are presumed to share a boundary fence’s cost equally, after 30 days’ written notice to the neighbor.
That comes up a lot on Bellflower’s close-set lots. We build to whatever you and your neighbor agree on.
Yes, both. Vinyl and aluminum are ours to install and custom-fabricate across Bellflower and the nearby Greater LA communities.
Estimates are free, and inquiries get an answer the same business day, so nothing stalls at the start.