Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
Get a vinyl or aluminum fence built for your Calabasas lot, sized to its slope, made to stand up to canyon wind, and matched to your street’s height rules.
A licensed, 5.0-rated crew reads your lot, quotes it straight, and builds a fence that never needs paint. Your free quote is one call away.


Across Calabasas and Greater LA, we install and custom-build vinyl and aluminum fencing at any height the property and code allow.
Private vinyl or modern aluminum, we size each fence to your lot, your budget, and whatever Calabasas hillside or gated-community rules require. Count on a straight quote, a build made for canyon wind, and warranties put in writing.
Vinyl and aluminum are the pair we build in, and across Calabasas homes both get installed and custom-fabricated to fit. Properties here run from hillside estates in the Santa Monica Mountains to gated parcels inside The Oaks and Calabasas Park Estates. This is fire country, so material is a fair question: aluminum is a metal and vinyl a PVC product, but neither makes a fence fireproof or a defensible-space fix.
Vinyl is the value line and covers most of what a Calabasas yard needs: privacy, curb appeal, and a surface that never yellows or needs paint. The style range is broad:
Custom heights land from 2 to 8 feet, so small jobs and odd runs are welcome. Where a Calabasas lot funnels Santa Ana wind through the canyons, we run a concealed metal insert: vinyl outside, steel within, steady against any realistic gust.

Aluminum is the premium line: modern, architectural, and shrugs off weather with no rust or repainting. It fits a home after clean lines and open sightlines, privacy to picket. Heights are custom from 2 to 12 feet, 6 feet typical. Neither material wins outright: vinyl leans to value and full privacy, aluminum to a premium modern edge, and we help you choose.
A fence quote tracks your project, not a sticker. The movers: material, the run’s height and length, the gate count, any old fence to pull, and how easily a crew reaches it. Calabasas hillsides add their own line items: slope, grading, and stepped panels a level lot never sees. You get a rough range by phone, then a firm written figure after we walk the property.
Every vinyl fence carries a transferable limited lifetime warranty. Aluminum is covered for 20 years on the material, 10 on the powder coating, and 2 on the steel components, kept valid by a documented cleaning twice a year.
On top of either, a 5-year PVAF workmanship warranty backs the labor. The proof is public: operating since 2018, a member of the American Fence Association, and a 5.0 rating from Greater LA homeowners across 500+ five-star reviews.
Everything we install and fabricate in vinyl and aluminum is available in Calabasas: privacy and picket styles, gates, pool-code fencing, and wall toppers for an existing wall.
Made to order means the color is settled before anything is cut, and no brush changes it afterwards. Carry a swatch out and look twice, once in flat morning light, once late in the day. Both materials hold what you choose.
Ask what you want the surface to do. Nothing, and the plain solids answer. Look like milled board with no stain in it, and six smooth grains handle that. Shift as the light moves, and the four textured blends are your group.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Pick the profile and the finish list follows from it. Flat and slatted panels give you three: white, black, wood grain. Contoured slats come one way, matte black. No custom finish exists, so nobody is matching a paint chip for you.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
Past a certain point a run needs help standing up, so tall aluminum builds get reinforced from inside the post where nothing shows. The table sets out what each style reaches. Purpose, ground and the local rule pick from inside that.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
See the vinyl and aluminum work we have finished in and near Calabasas, in the finishes, tones, and heights that suit local hillside and gated lots. Full-privacy screens, picket runs, pool-code panels, open aluminum lines: scroll the photos, then start a free quote when a look grabs you.
Calabasas is a Los Angeles County city where the southwestern San Fernando Valley meets the foothills of the Santa Monica Mountains, 30 miles northwest of Downtown LA. Incorporated in 1991, it is home to roughly 23,000 residents and known for hillside estates and gated communities like The Oaks and Calabasas Park Estates.
Front-yard fences and walls are generally limited to about 42 inches near the front line, stepping up toward 6 feet farther back, while side and rear fences run up to 6 feet. A building permit is generally required once a fence tops 6 feet (CMC 17.20.100; City Building and Safety FAQ). Rules vary by zone, so verify with the City’s Community Development Department.
Calabasas sits in hilly terrain between the Santa Monica Mountains and the San Fernando Valley, within a designated Very High Fire Hazard Severity Zone. Santa Ana winds run fall into early spring, and canyon-facing lots catch the strongest gusts, where our metal-insert vinyl earns its keep and aluminum’s wind engineering pays off.
In rural and open-space zones (RR, HM, OS) near mapped wildlife corridors, fencing generally must be wildlife-friendly. On fire, be honest: no fence is fireproof or a defensible-space solution, though aluminum is metal and vinyl is PVC.
On a shared property line, California’s Good Neighbor Fence Act (Civil Code 841) presumes neighbors split the cost equally, with 30 days’ written notice. Pool barriers must be at least 60 inches tall with no gaps over 4 inches and a self-latching gate, and vinyl is an approved non-climbable barrier. Many Calabasas gated communities also set fence rules in their CC&Rs, so check your HOA’s guidelines first.
A permit is generally required once a fence tops 6 feet, and some hillside parcels also need HOA approval; we build to code either way. Rules turn on your exact parcel, so confirm with Calabasas Community Development.
From the first phone call to the final panel, your Calabasas fence takes four clear steps: a free on-site estimate, the scope and price set down in a written agreement, a tidy crew that builds it right, and a warranty handed to you at the end.
The pricing talk usually happens up front, in plain numbers you can plan around, with no pressure to sign.
A ballpark by phone, then a firm number once we see your Calabasas lot, its slope, access, and any fence to remove.
The scope, materials, heights, schedule, and warranty go on paper first, so nothing about the job surprises you later.
The crew sets footings right, builds panels true to your slope and height, and cleans the site each day.
Your install is backed by real material and workmanship warranties, and we stay reachable if any question comes up.

Practical fencing advice for Calabasas homes, from styles and heights to permits. Browse the guides below.
Vinyl fence panels work as well framing an office park or hotel pool as they do marking a backyard or livestock line.
Fences blog
Fencing in Calabasas: Your Questions Answered
Straightforward answers to what Calabasas owners ask about most: the height a fence may reach, the point a permit kicks in, how hillside and fire-zone overlays play out, the factors behind a quote, and where gated-community sign-off fits. Don’t see yours? Send it over and our team walks you through it.
Still have a question?
Reach our team for a straight answer and a free, no-pressure estimate.
Front-yard fences and walls are limited to about 42 inches near the front line, stepping up toward 6 feet farther back; side and rear fences generally reach 6 feet.
Rules vary by zone, so verify specifics with the City’s Community Development Department.
Generally, fences 6 feet or lower do not need a building permit, while taller fences and walls do; we build to code either way. Verify specifics with the City’s Community Development Department.
In hillside and open-space zones (RR, HM, OS) near mapped wildlife corridors, perimeter fencing generally must be wildlife-friendly, and scenic or fire-zone overlays can add design review.
Whether it applies comes down to your parcel, so verify with the City’s Community Development Department.
No. A fence is not a fireproof, fire-rated, or defensible-space solution, even though much of Calabasas is a Very High Fire Hazard Severity Zone.
Aluminum is a metal and vinyl is a PVC product, but real fire safety comes from defensible space and current local fire guidance.
Sloped Calabasas lots add cost through site access, grading, stepped or racked panels, and old-fence removal, on top of the usual drivers: material, height, length, and gates.
You get a firm number after a free on-site look, not a guess over the phone.
Yes. Many Calabasas gated communities, including The Oaks and Calabasas Park Estates, set HOA and CC&R rules on fence height, style, and color, on top of city code.
Check your HOA’s guidelines before you start, and we build to what they approve.