Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
Summers in the San Fernando Valley test a fence hard, so yours should hold its color and its line through Canoga Park’s hottest months without a repaint.
Since 2018 we’ve fabricated vinyl and aluminum runs for the LA market, and Canoga Park requests get a same-day reply, no pushy follow-up.


Canoga Park’s heat and grade shape every vinyl and aluminum fence we fabricate here, from privacy runs to modern panels.
Whether your block sits within the citywide 42 in front-yard cap or backs onto a taller side-yard allowance, we measure first and cut every panel to the exact height your lot actually permits, not a stock size.
The San Fernando Valley runs hot and dry through the summer, and a fence out here needs a finish that doesn’t fade or chalk under that sun year after year. Vinyl’s color runs through the material rather than sitting on top of it, so scrapes never flash white and the surface doesn’t yellow.
It doesn’t rot and it doesn’t need paint, so upkeep is a rinse twice a year, nothing more. We fabricate custom heights from 2 to 8 ft, racked to the grade of the lot rather than stepped down in blocks, in privacy, semi-privacy, picket, two-tone, ranch rail and pool-code styles, with 10 or more colors and styles to choose from.
Our aluminum line is modern and architectural only: privacy panels with closed slats, semi-privacy with open slats for airflow, picket, gates and wall toppers, finished in powder-coated black, white or a wood-grain tone, with a coating that meets ASTM E84 Class A standards against flame spread and smoke; aluminum patio covers round out the line.
It’s backed by a 20-year material warranty, a 10-year coating warranty, 2 years on steel components, and our own 5-year workmanship warranty layered on top of all three. The coating needs a documented cleaning every 6 months to stay covered.
Vinyl privacy and semi-privacy fencing is the bulk of the work here, with picket and two-tone runs alongside it. In aluminum we build picket panels, wall toppers and patio covers. Gates come single, driveway or rolling, all cut to Canoga Park’s Valley lots and setbacks.
A quote comes down to total footage, the exact height allowed on your lot, the material you pick, how many gates you need, the grade of the yard, and whether an old fence needs to come out and be hauled fully away first. A free, no-obligation on-site visit turns those factors into an exact number, never a phone guess.

Every style ships with a matching gate, and driveway or rolling gates get extra internal framing to stay true on a wide span, ready for an automation kit later if you want to add one down the road near Owensmouth Park; we don’t supply the motor itself.
Wall toppers add height and screening on an existing block wall without demolition, a useful option on Canoga Park’s tighter interior lots where tearing out a wall isn’t practical at all. Small and odd-shaped jobs are welcome too, the kind of work a lot of crews would rather pass on.
At four in the afternoon in July you are a foot from this surface, not studying it from the street. Sun is the test both materials pass differently. Vinyl keeps its tone all the way through. Metal keeps its finish bonded on.
Put a palm across these and the groups separate before the colors do. Plain solids are flat under the hand, six grain tones carry a milled face, and the textured blends are the coarse end of the range. Heat changes none of it.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Laid on dry and electrostatic, then heat cured, the coat is bonded to the aluminum and not brushed across it. Black and white do most of the work out here. A grain look is the third. For contoured slats the answer is matte black.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
The table knows one thing: how far each style is built to run. It does not know your slope, your setback, or what you need the fence to do for you. Those three settle the figure, inside whatever the city allows.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Browse vinyl and aluminum styles installed in and around Canoga Park: privacy panels, picket runs, wall toppers on existing block walls, driveway gates, and the color and finish choices Valley homeowners keep asking us for this whole season.
Canoga Park was annexed into the City of Los Angeles in 1917 and took its present name in 1931. It’s home to roughly 60,971 residents in the San Fernando Valley, about 35 miles northwest of downtown LA.
Winnetka, Woodland Hills, Chatsworth and Reseda border it, with Calabasas a short drive further west. Topanga Canyon Boulevard and Fallbrook Avenue carry most of the through traffic, and Canoga Park High School and Owensmouth Park anchor the neighborhood.
Canoga Park’s semi-arid Valley climate means long stretches of high heat every summer. A painted surface fades and chalks under that kind of exposure; vinyl’s color running through the material keeps a fence looking the way it did on install day for years longer, with a rinse twice a year as the only upkeep.
As an LA neighborhood rather than a separate city, Canoga Park follows the Los Angeles Municipal Code citywide: front yards cap at 3.5 ft (42 in), side and rear yards at 6 ft, with up to 8 ft allowed on R-zone lots 40 ft or wider, non-hillside, once Planning signs off.
A non-masonry vinyl fence only needs an LADBS building permit above 10 ft, while a masonry or concrete wall over 3.5 ft, or any retaining-wall fence, always needs one regardless of height. Verify your parcel’s exact standing with the LA Department of City Planning before building anything close to those limits, since setbacks vary block by block.
Every Canoga Park project runs through the same four stages: a measured on-site estimate, a written contract, a careful build suited to Valley heat and lot setbacks, and a warranty that’s actually documented, in writing.
The pricing talk happens first, in person, before any contract gets signed or work ever begins.
A salesman visits your property, walks the yard, checks the setback lines, and hands you a firm number before leaving.
Materials, colors, exact heights, gate count and install date all go into one signed document, matching the quote.
The crew sets posts to plumb, fabricates and hangs each panel on site, and clears the old fence when the run is done.
Coverage is real: vinyl’s lifetime terms, aluminum’s 20 and 10-year numbers, and our 5-year workmanship warranty.

Practical reads on vinyl versus aluminum, upkeep, and code basics for Canoga Park properties.
Brown vinyl in Los Angeles asks for nothing more than a rinse, skipping the repainting and rust treatment wood and metal need.
Fences blog
Fence Questions From Canoga Park Homeowners
Front-yard caps, side-yard exceptions and permit thresholds all follow LA’s citywide fence code out here, and Canoga Park homeowners want the specifics before a crew ever measures the yard, so here’s exactly what applies, straight and fully complete.
Still have questions?
Send a message or call; expect a reply the same business day.
Front yards in Canoga Park follow LA’s citywide cap of 3.5 ft, or 42 in, under LAMC 12.22 C.20(f).
That limit applies the same way across every LA neighborhood, so verify it against your exact lot line with the Department of City Planning.
Yes, on R-zone lots that are 40 ft wide or more and not on a hillside, LA allows up to 8 ft on side and rear yards with Planning approval. Smaller or hillside lots stay capped at 6 ft, so confirm your zoning first.
A non-masonry fence like vinyl only needs an LADBS building permit above 10 ft.
A masonry or concrete wall over 3.5 ft, or any retaining-wall fence, needs one regardless of height, so the material you pick changes the answer.
Where a property is part of an HOA, approval is typically required before work starts, and CC&Rs can be stricter than the city code. Check both sets of rules before settling on a design.
Pools here follow the statewide Pool Safety Act, not a city rule: a barrier at least 60 in tall, within 2 in of the ground, gaps under 4 in, and a gate that self-latches outward.
Vinyl meets the approved-material requirement.
Alongside Canoga Park, we regularly work in Winnetka, Woodland Hills, Chatsworth and Reseda, with requests from the Calabasas area handled just as often.