Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
A Fence Built Around Your Culver City Lot
Fence Contractor in Culver CityPicture privacy panels, a low picket line or a pool enclosure, shaped to your exact yard and to Culver City’s 4 ft front yard height cap.
We fabricate and install both materials ourselves, backed by a 5 year workmanship warranty on every job across Greater LA.
- 5-Star Reviews
- 350+
- Warranty
- Lifetime
- Projects Completed
- 1000+
Get your free estimate today
Fencing Built for Culver City Homes
From Downtown Culver City to the Media District, we fit vinyl and aluminum fencing to lots of every size and shape.
Vinyl shrugs off coastal fog and daily wear without paint or rot, aluminum brings a modern powder coated look to front yards and pool enclosures, and every style ships with a matching gate built to fit your opening.
Culver City’s Fence Rules in Brief
Culver City Municipal Code Chapter 17.300 caps a front yard fence at 4 ft, with side and rear yards allowed up to 6 ft.
The city’s own guidance does not spell out one clean height that triggers a building permit on a side or rear fence, so treat 6 ft as the point worth confirming with the Planning and Development Department before a design is finalized. If your street sits inside an HOA, its CC&Rs can set a stricter limit than the city does.
Fencing for Every Corner of Culver City
We build the same way whether the job sits in Downtown Culver City, along the Media District, or out near the Baldwin Hills area. Lots along Culver Boulevard, Washington Boulevard, Venice Boulevard and Sepulveda Boulevard tend to run narrower and closer to the sidewalk, which puts extra weight on getting that 4 ft front yard line exactly right.
Yards backing onto Culver City Park or sitting near Ballona Creek often want a taller, more private side and rear yard line, up to the 6 ft cap, for screening from a public path or open space.
Services we offer in Culver City
Vinyl privacy and semi-privacy panels, picket in several profiles, ranch style rail, pool code enclosures and matching gates cover most Culver City yards. For a more contemporary front yard or pool area, our aluminum line runs privacy and semi-privacy slats, picket, and driveway or rolling gates in a powder coated finish. Wall toppers add height and screening on top of an existing block wall without tearing it out first.
Vinyl or Aluminum: What Fits Your Yard
Vinyl never yellows because the color runs through the material rather than sitting on top of it, and it needs nothing beyond a rinse twice a year. In a windier stretch near the coast, we can build with metal inserts hidden inside the rail: it still looks like vinyl from the yard, but it takes real wind without flexing.
Aluminum leans modern, with a black, white or wood grain powder coat finish and a 20 year material warranty, a 10 year coating warranty and 2 years on the steel components, on top of our own 5 year workmanship warranty.
What Shapes Your Culver City Fence Estimate
A few things move the number: total footage, the height you need at the front versus the side and rear, how many gates the layout calls for, whether the old fence needs to come out first, and any slope the posts have to follow. A ballpark over the phone gets you in the right range, but a real number takes a visit to your actual lot. Reach out for a free, no obligation on-site estimate and we’ll walk you through it.
The Color Range Here
Elevations vary block to block here, so there is no default tone. Hold the swatch against the house, not against the yard. Then let the material narrow it, because vinyl and aluminum do not draw from one list.
Vinyl, Family by Family
Run a finger over these and the three groups sort themselves out. Plain solids read flat and clean. Smooth wood grains carry a grain you can feel, Weathered Aspen and Slate Gray among them. Textured blends go deeper again.
- White
- Tan
- Clay
- Gray
- Coastal Cedar
- Dark Walnut
- Dark Sequoia
- Weathered Aspen
- Mesquite
- Slate Gray
- Arctic Blend
- Brazilian Blend
- Sierra Blend
- Weathered Blend
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
What Aluminum Offers
Contemporary elevations tend to land on black, and every aluminum profile carries it. White and one grain finish join it everywhere except the contoured slat, which stays matte black. In full sun the powder coat holds without a repaint.
- Black
- WoodGrain
- White
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
Height, Lot by Lot
Lot shape decides more here than the table does. A deep rear yard and a narrow side run want different numbers, and a corner parcel wants a third. Style caps the top end, the city caps the front, and we build to what is left.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Fences, Gates and Patio Covers We Build in Culver City, CA
Our Services-
-
Vinyl Gates
The full vinyl gate lineup runs on a metal frame under the cladding, from a single side gate to a wide driveway gate.
-
Vinyl Wall Toppers
A short section mounted on the wall or fence you already own, adding height without tearing out what still works.
-
Colored Vinyl Fences
Every real vinyl fence color we build, spanning solid neutral tones to layered wood-grain finishes.
-
Vinyl Patio Covers
Patio covers and pergolas get built to your yard’s footprint, skipping the sanding and staining a wood cover demands.
-
Aluminum Fences
Custom aluminum fencing built in privacy, semi-privacy, or picket styles, powder-coated against rust.
-
Aluminum Wall Toppers
Wall toppers welded from aluminum, anchored atop your existing block or masonry wall to add height.
-
Aluminum Gates
Gates welded from aluminum to match your fence, built as a walk, driveway, or rolling gate.
Culver City Customer Feedback on Our Fence Installs
Excellent to work with, any concerns are addressed immediately without hesitation. An older gentleman showed up the day of and worked 8 hours straight with two 15 minute breaks. I gave him bottled waters to ensure he stayed hydrated.
A respectful and talented gentleman who took pride in his work.
Beautiful work! This is perfect and installed professionally. Very affordable and very friendly staff. Jasmine was able to work with me over the phone and Levon got this job done within 24 hours of me calling!! 10/10 would recommend!
First and foremost I wish to express our appreciation on the installation of 2 gates by Har. Both gates which included a curve piece were done per our specifications. Additionally I wish to express our gratitude to Michael for his guidance and assistance in the design phase. Job well done Pro Vinyl Fencing
I had an old wooden partition between two patios that needed replacing. I had taken good care of it but wood eventually rots. They removed the old fence and installed a custom new one it looks fantastic.
I’m so happy with the work. It was done in a timely professional manner for a great price. I highly recommend them. Thank you, Nairi.
Our Fences
Culver City Vinyl and Aluminum Projects
Scroll the grid for privacy runs, picket lines, pool enclosures and aluminum gates finished in and around Culver City, real jobs on real streets near Downtown and the Media District, then send us a photo of your own yard for a closer match.
Fence Installation in Culver City, CA
Culver City by the Numbers
Culver City incorporated on September 20, 1917 and sits about 12 miles southwest of downtown Los Angeles, inside Los Angeles County. The 2020 census counted 40,779 residents. It borders Los Angeles, Inglewood, Playa Del Rey and Manhattan Beach, which makes it a compact city surrounded almost entirely by its bigger neighbors.
Neighborhoods and Corridors We Work In
Jobs run from Downtown Culver City through the Media District and out toward the Baldwin Hills area, along Culver Boulevard, Washington Boulevard, Venice Boulevard and Sepulveda Boulevard. Lot widths shift block to block along these corridors, so a fence line that works two doors down does not always translate to your own frontage without a real measurement.
Fencing Near the Park and the Creek
Culver City Park and the Kenneth Hahn State Recreation Area sit close to residential streets on the city’s edges, and Ballona Creek runs along part of the city as well. Yards backing onto park land or the creek corridor often want the fullest allowed side and rear yard height for privacy from a public path, rather than the shorter front yard line facing the street.
Height Rules and Permits, in Brief
Front yard fencing tops out at 4 ft under Culver City Municipal Code §17.300.030, with side and rear yards allowed up to 6 ft. The published rule does not give one firm height that triggers a building permit for a side or rear fence, so that threshold is worth confirming directly with the City of Culver City Planning and Development Department before finalizing plans.
A pool barrier follows California’s statewide rule regardless of neighborhood: at least 60 in tall with a self-closing, self-latching gate.
Population40,779
CountyLos Angeles County
ZIP Code90230-90233
Max Fence Height6 ft
Local Projects
Recent Fence Projects in Culver City
Every tab below pairs a tired old fence with the vinyl or aluminum line that replaced it, gate work, post layout and demolition of the old line included, on lots built much like your own near Culver City Park and Ballona Creek, panel by careful panel.
White Privacy Fence, Culver City
The side yard on this Culver City property had marked its boundary with a small green-painted wood gate and a hedge that had grown out over the line. Both were removed to make way for the new fence.
In its place, a white vinyl privacy fence and matching gates now run the length of that side yard, closing the boundary between the two properties. The new posts were set along the gravel and soil strip that runs between the two houses, following the same line the old gate and hedge had marked.
Igor and Ruslan were amazing, worked so hard and did an amazing job. Fence looks fantastic! Highly recommend the company and their workers
Project Gallery
BeforeAfter
Location
Culver City
Customer
Peter H.
Project Type
Privacy Fence
Budget
$5,000 - $7,000
White Vinyl Fence, Culver City
This Culver City side yard previously had a metal gate and an open boundary along the property line, with an old cinder block wall taking up part of the space. Our crew removed the wall and prepped the area before the new fence went in.
A white vinyl privacy fence with a matching gate replaced the old metal gate and open boundary. The new fence line follows the brick and concrete walkway already in place.
Pro Vinyl Fence just installed a beautiful privacy fence on the side of our house and we are very happy. They removed a cinder block wall and prepped the space leaving the area clean and ready. They were timely, polite, and professional.
Project Gallery
BeforeAfter
Location
Culver City
Customer
Amy D.
Project Type
Privacy Fence
Budget
$5,000 - $7,000
Tan Vinyl Privacy Fence
This Culver City backyard had an old wood fence that had weathered over the years. The crew took it down and put up a tan vinyl privacy fence in its place, following the boundary around the garden.
The new fence line was set to follow the shape of the yard, running along the planting beds, past the brick patio, and alongside the concrete walk. With the old wood fence gone, the garden now has a consistent tan vinyl line marking its edges along the planting beds and patio.
Very happy, from start to finish. The installers, Mko and Gogik were on time every day, worked thoughtfully and efficiently especially when having to navigate tree roots, sprinkler systems, slope, and property lines. Thank you ProVinyl, we appreciate your hard work and quality product!
Project Gallery
BeforeAfter
Location
Culver City
Customer
Lisa R.
Project Type
Privacy Fence
Budget
$10,000 - $15,000
Your Culver City Fence, Step by Step
Our ProcessA Culver City install runs the same four stages whether it is a short front yard picket capped at 4 ft near Downtown or a full 6 ft side and rear yard rebuild out toward the Media District and the wider Baldwin Hills area.
Nothing about the price, the materials or the schedule stays a surprise once the contract is signed.
Free Site Visit
A salesman walks your lot, notes slope and gate counts, and hands you a real number before he leaves.
Written Contract
Materials, colors, heights and the schedule go on paper, so the number you signed for is the number you pay.
Build and Install
Posts go into the ground, panels come next, gates get hung last, and the old line is hauled away as we finish.
Warranty on File
Vinyl carries lifetime coverage, aluminum its 20 10 2 year terms, both backed by our 5 year labor guarantee too.
the learning hub
Fence Care and How-Tos
Fence GuidesGuides on upkeep, color choice and code basics for Culver City yards, drawn from jobs we have already built.
How to Choose the Right Vinyl Fence Style for Your Property
Vinyl fence panels work as well framing an office park or hotel pool as they do marking a backyard or livestock line.
Fences blog
Culver City FAQs
Culver City Fence Questions, Answered Plainly
Homeowners near Downtown Culver City and the Media District ask us about height limits, permits and pool code long before they ever place a single phone call, so here is what our crew tells them plainly, with no sales pitch attached to any part of it.
Still Have a Question?
Send us the details of your lot and we will call back the same day.
Culver City Municipal Code Chapter 17.300 caps front yard fences at 4 ft. Side and rear yards can run up to 6 ft.
Confirm your exact lot line and any recent code updates with the City’s Planning and Development Department before you finalize a design.
The city’s published guidance does not spell out one clean height threshold for a building permit on side and rear fences.
Treat 6 ft as the point to verify locally, and confirm the current requirement with Culver City’s Planning and Development Department before work begins.
Yes. Vinyl is approved under Culver City’s height rules in every neighborhood we have worked, from Downtown Culver City to the Media District.
If your street sits inside an HOA, its CC&Rs can be stricter than the city, so check that separately.
Most single lots move from signed contract to finished fence within one to two weeks, depending on gate count and any demolition of an existing fence. Your written contract will carry the exact schedule for your yard.
The city code does not ban mixing materials on one property, and we treat wood and chain link with the same respect as vinyl or aluminum when a yard calls for it.
Most homeowners near Culver City Park choose one material for a clean street-facing line.
State law sets the bar statewide: barriers at least 60 in tall, no more than 2 in of clearance under the gate, no gaps wider than 4 in, and a self-closing, self-latching gate that swings away from the pool.
Vinyl meets this as a non-climbable material.
We'd love to hear from you
Email sales quotes@provinylfencing.com
Call LA (844) 744-0707