Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Vinyl & Aluminum Fencing Built for Glendale
Fence Contractor in GlendaleGet a vinyl or aluminum fence built for your Glendale yard, sized to its slope, made to take the canyon wind, and matched to your street’s height rules.
A licensed, 5.0-rated crew gives you an honest estimate up front and a fence that never needs paint. Your free quote is one call away.
- 5-Star Reviews
- 350+
- Warranty
- Lifetime
- Projects Completed
- 1000+
Get your free estimate today
Fence Installation & Fabrication in Glendale
For Glendale homes and businesses, we install and custom-build vinyl and aluminum fencing at any height the property and code allow.
From full-privacy panels to modern aluminum, we match the fence to your yard, your budget, and Glendale’s rules. You get an honest quote, a fence built to last, and warranties in writing. Not sure which material fits? We walk you through it.
Vinyl and Aluminum Fencing for Glendale Homes
Vinyl and aluminum are the two materials we work in, and for Glendale homes we install and custom-fabricate both. Glendale homes run from flat blocks near Downtown and the Americana to hillside lots in Chevy Chase Canyon, and the right fence is rarely the same on both. Every fence we sell, we build to your yard, not a stock catalog, so height, style, and layout fit the property.
Our Vinyl Fences: Style, Height, and Wind Strength
Vinyl is our budget-friendly line, covering most of what a Glendale home needs: privacy, curb appeal, and a finish that never yellows or needs paint. The style range is wide:
- Full privacy and semi-privacy panels, from a solid screen to a spaced board that keeps some airflow.
- Picket, ranch rail, and lattice-top styles for a lighter, decorative look.
- Pool fencing, matching gates, and wall toppers for a block wall.
Custom heights run 2 to 8 feet, so the odd runs and small jobs other crews skip are the ones we want. Where a Glendale lot catches canyon wind, we run a hidden metal insert: vinyl outside, metal inside, and it takes any realistic wind this area gets.
Aluminum Fencing for a Premium Look
Aluminum is our premium line: modern, architectural, and engineered to shrug off weather without rust or repaint. It suits a Glendale home after a crisp, modern look, from full-privacy screens to open picket, with welded driveway and rolling gates, automation-ready. Heights are custom from 2 to 12 feet, 6 feet the usual pick, and its wind engineering runs well above what a Glendale site sees.
What Does a Fence Cost in Glendale?
A fence price comes down to your project, never a sticker. What moves it: material, the run’s height and length, terrain, gates, and old-fence removal. Glendale’s hillside and canyon lots can add slope and access work a flat parcel never sees. You get a ballpark over the phone, then a firm written number after we walk the property, free and with no pressure to book.
Warranties and Proof You Can Check
Every vinyl fence carries a transferable limited lifetime warranty. Aluminum carries 20 years on the material, 10 on the powder coating, and 2 on steel components, kept valid by a documented cleaning twice a year. Both add our own 5-year workmanship warranty. The proof is public, too: in business since 2018, American Fence Association membership, and a 5.0 rating from homeowners across Greater LA, on 500+ five-star reviews.
Services We Offer in Glendale
The full vinyl and aluminum lineup we install and build for Glendale covers privacy and picket panels, gates, pool fencing and wall toppers, every piece fabricated to the property it goes on.
Colors on Both Sides
A building and a back yard get judged by different eyes, so what looks right on one can read wrong on the other. Vinyl runs the wider list, aluminum the shorter, and both hold their color without paint.
The Vinyl Swatch Groups
White never flashes out from under a chip here; the color is the material, not a layer over it. Solids stay plain, smooth wood grains bring warmth, textured blends push furthest. Pair two of them and you get a two-tone run.
- White
- Tan
- Clay
- Gray
- Coastal Cedar
- Dark Walnut
- Dark Sequoia
- Weathered Aspen
- Mesquite
- Slate Gray
- Arctic Blend
- Brazilian Blend
- Sierra Blend
- Weathered Blend
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Finish on the Metal
Paint sits on metal. Powder coat is fused to it, applied dry and cured with heat, which is why the color holds through full sun. The range is narrow by comparison: three on solid and slatted profiles, matte black on contoured slats.
- Black
- WoodGrain
- White
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
How the Height Is Set
A business perimeter and a home yard start from different needs, and the style already caps the top of the range before either weighs in. The lot cuts into that, and the city sets a ceiling nobody moves.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Fences, Gates and Patio Covers We Build in Glendale, CA
Our Services-
-
Vinyl Gates
The full vinyl gate lineup runs on a metal frame under the cladding, from a single side gate to a wide driveway gate.
-
Vinyl Wall Toppers
A short section mounted on the wall or fence you already own, adding height without tearing out what still works.
-
Colored Vinyl Fences
Every real vinyl fence color we build, spanning solid neutral tones to layered wood-grain finishes.
-
Vinyl Patio Covers
Patio covers and pergolas get built to your yard’s footprint, skipping the sanding and staining a wood cover demands.
-
Aluminum Fences
Custom aluminum fencing built in privacy, semi-privacy, or picket styles, powder-coated against rust.
-
Aluminum Wall Toppers
Wall toppers welded from aluminum, anchored atop your existing block or masonry wall to add height.
-
Aluminum Gates
Gates welded from aluminum to match your fence, built as a walk, driveway, or rolling gate.
What Customers Say About Our Fence Work
The fencing is Beautiful! Everything was perfect from start to finish! David did an Outstanding Job!!! Extremely professional, clean and clear on all of our requirements!
We Highly recommend this company and David as an installer!!!
Mike gave us the estimate. Was really patient and explained things well. Jasmin easy to communicate especially through text and Avag was super nice and polite. Avag, Did a great job installing our side fence. Will be calling them again for more fencing in the future.
Michael (Mike) was very helpful from the beginning till the end of my project. He had the project managed perfectly from scheduling to installing the vinyl with perfection. The installers and Mike are AMAZING.
Left no trash or debris behind and overall super satisfied with my project. Will recommend (Mike) to all my neighbors and friends.
So happy to have found Pro Vinyl Fencing! we had multiple companies bid on the work and they definitely brought the best offer.
Vardkez came over to install after final measurements were done and worked super hard in 90+ degree weather to get the job done. He has done amazingly and we couldn’t be happier with the results. Thank you!
Our Gallery
Fence Projects In and Around Glendale
Take a look at vinyl and aluminum fences we have installed in and around Glendale, in the styles, colors, and heights homeowners here actually choose. From full-privacy backyards to decorative front yards, browse the gallery for ideas, then start a free quote when something clicks.
Glendale Fence Rules and Local Conditions
About Glendale
Glendale sits in Los Angeles County, tucked against the Verdugo Mountains with the San Rafael Hills to the south, about 10 miles north of Downtown LA. Incorporated in 1906, it is home to roughly 188,000 residents, from Downtown and the Americana to Montrose, Sparr Heights, Adams Hill, and hillside Chevy Chase Canyon. A flat urban lot and a sloped canyon parcel call for different fences.
How Tall Can a Fence Be in Glendale?
A front or street-side fence tops out at 4 feet and must sit at least 5 feet back from the curb (GMC 30.21.040). Side and rear fences reach about 6.5 feet, with any portion above that at least 50 percent open (GMC 30.11.070). Over 7 feet needs a building permit, as do retaining walls 4 feet and up.
F (Fence) Overlay streets limit the front to 42 inches and 50 percent open, and hillside zones (R1R, R1, ROS) add review over 3 feet. We build custom to what your zone allows; always verify the specifics with Glendale Planning or Building and Safety.
Fencing for Glendale’s Hillsides and Canyons
Most of the year Glendale is calm, but Santa Ana winds arrive in the fall, usually October to December, and homes against the Verdugos and San Rafael Hills catch stronger gusts as the air funnels through the canyons. That is where our metal-insert vinyl earns its keep and aluminum’s higher wind engineering pays off.
Shared Fences, Pools, and HOA Rules
If a fence sits on the property line, California’s Good Neighbor Fence Act (Civil Code 841) presumes neighbors share the cost equally and asks for 30 days’ written notice. Pool barriers must be at least 60 inches tall with no child-sized gaps and self-closing, self-latching gates, and vinyl is an approved non-climbable material. Many Glendale HOAs also set style, height, and color rules in the CC&Rs, so check yours first.
When a Fence Needs a Permit in Glendale
In Glendale a building permit is required once a fence tops 7 feet, and for a retaining wall 4 feet or taller. Rules vary by zone, so verify the specifics with Glendale Building and Safety.
Population196,543
CountyLos Angeles County
ZIP Code91201-91226
Max Fence Height6.5 ft
Our Projects
Real Fence Installations in Glendale
See before-and-after installations from Glendale yards, across both vinyl and aluminum. Each one shows what changed: more privacy, a cleaner curb view, a fence built for canyon wind, or a height brought in line with HOA and city rules. Flip through the tabs, then start your project when you are ready.
Two-Tone Privacy Fence, Glendale
This Glendale property had a small painted wood enclosure on a tiled patio beside the house entry. That structure was taken out to make room for a vinyl privacy fence in the same spot.
The new fence is a two-tone vinyl privacy design in tan and white, finished with a white lattice section along the top edge, installed at the entry in place of the old wood enclosure. Rather than digging new footings, the posts were anchored directly into the existing tiled patio.
Very thorough estimate, helpful staff and quick, and clean installation. Not to mention a reasonable price. Would highly recommend this company.
Project Gallery
BeforeAfter
Location
Glendale
Customer
Max D.
Project Type
Privacy Fence
Budget
under-1000
Tan Privacy Fence, Glendale
This Glendale side yard had a white-painted wood fence and gate that had started to lean. In their place, our crew installed a tan vinyl privacy fence with a decorative lattice top, anchored along the existing paved side yard.
The project included matching gates, replacing the one that had been part of the old wood fence. The lattice sits above the solid privacy panels, giving the fence a decorative finish along its top edge.
Fantastic job! Delightful group of guys finished the project with professionalism and speed! I was watching the whole process and these guys were thorough!
Project Gallery
BeforeAfter
Location
Glendale
Customer
Albert A.
Project Type
Privacy Fence
Budget
$3,000 - $5,000
White Wall Topper, Glendale
This Glendale property has a run of low stucco and masonry wall along a passage on the site. A white vinyl privacy wall topper now runs continuously along that wall line.
It sits on top of the existing stucco and masonry rather than replacing it, following the wall’s own path along its length. With the topper in place, the passage has continuous privacy along its run.
Professional, trustworthy, easy communication and same day quotes. Would definitely use them again
Project Gallery
BeforeAfter
Location
Glendale
Customer
Shell B.
Project Type
Wall Topper
Budget
$1,000 - $3,000
How Your Glendale Fence Comes Together
How It WorksFour steps take your Glendale fence from first call to finished line. We start with a free on-site estimate, put the scope and price in a clear contract, install with a careful crew, and hand over your warranty at the end. No surprises.
The pricing conversation happens up front, in plain numbers you can plan around, with no pressure to sign.
Free On-Site Estimate
A ballpark by phone first, then a firm number once we see your Glendale lot, its slope, access, and any fence to remove.
Clear Written Contract
Scope, materials, height, timeline, and warranty all go in writing, so you know what you are getting before we start.
Clean, Quality Install
Our crew clears the old fence, builds for Glendale’s slope and wind, and cleans up after. Many jobs finish in a day.
Warranty and Aftercare
We register your warranty, hand it over in writing, and stay reachable if any question comes up down the road.
the learning hub
Glendale Fencing Guides
Learning HubPractical fencing advice for Glendale homeowners, from materials to permit rules. Browse the guides below.
Vinyl Doors: A Low-Maintenance Option for Busy LA Homeowners
Vinyl doors resist weather and rust while cutting both energy bills and outside noise year round.
Fences blog
Common Questions
Fencing in Glendale: Your Questions Answered
Quick, honest answers to what Glendale homeowners ask most: how tall a fence can be, when a permit comes into play, what drives the cost, how our fences handle Santa Ana wind, which neighborhoods we cover, and how local HOA rules fit in. Not seeing yours? Ask, and we will walk through it.
Still have a question?
Reach out for a free, no-pressure conversation about your project.
In Glendale, front and street-side fences top out at 4 feet, while side and rear fences can reach about 6.5 feet, with anything above that at least 50 percent open.
Go over 7 feet and you will need a building permit. F-overlay streets and hillside zones can be stricter, so verify your specific zone.
Usually not for a standard fence under 7 feet on a normal lot. A building permit is required over 7 feet, and for retaining walls 4 feet and up or fences next to a slope or right-of-way.
F-overlay and hillside zones add rules, so verify the specifics with Glendale Planning.
They can. Cost tracks the material, height, length, gates, and old-fence removal, and a sloped canyon lot often adds grading and access work a flat parcel never needs.
We do not quote from a price list. You get a phone ballpark, then a firm written number after we walk the property.
They can stress a poorly built fence, especially on canyon lots near the Verdugos where gusts pick up speed.
A footed vinyl fence with our hidden metal insert, metal inside and vinyl outside, handles the wind Glendale realistically gets, and aluminum is engineered higher still.
All of Glendale, from Downtown and the Americana to Montrose and Sparr Heights, Adams Hill, and hillside Chevy Chase Canyon, plus the nearby Greater LA communities.
Estimates are free city-wide, and we answer inquiries the same business day, so you are never waiting long to start.
Often, yes. Many Glendale HOAs set their own style, height, and color rules in the CC&Rs, on top of city code.
We build to whatever your HOA and the city both allow, so review your CC&Rs with your HOA and confirm any height limits with Glendale Building and Safety before you plan.
We'd love to hear from you
Email sales quotes@provinylfencing.com
Call LA (844) 744-0707