Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
A boundary next to industrial-zoned land has to read deliberate, not makeshift. Vinyl or aluminum, cut to your exact Irwindale lot lines and setbacks.
We’re the crew behind local vinyl and aluminum installs, in business since 2018, rated 5.0 across 500+ customer reviews.


Irwindale mixes industrial parcels with small residential pockets, so a fence line has to read clean from both sides of the property.
Panels get cut on site to match odd lot shapes, gate widths and grade changes, no gaps or filler pieces left over from a stock size. A walkthrough of the actual property comes first, never a guess over the phone.
Irwindale incorporated in 1957 and has stayed one of the smallest cities in Los Angeles County by population, with a heavy industrial base sitting alongside its residential streets near Historic Route 66.
Properties here often sit close to commercial or industrial-zoned neighbors, which puts a premium on a fence line that reads clean, private and deliberate rather than makeshift. A well-built boundary does more work in a city laid out this way than it would in a purely residential suburb.
Vinyl is the workhorse choice for Irwindale homes: the pigment is mixed all the way through the vinyl instead of sprayed on as a coating, so a scrape never shows white underneath and the panels never need paint. Upkeep is a rinse twice a year, nothing more.
We build privacy, semi-privacy and picket styles, in custom heights from 2 to 8 ft, racked to follow any grade change across the lot so the line stays level with the ground rather than stepping down in blocks. Colors run from clean white to shades that read close to natural wood.

For homeowners who want a modern look instead of a traditional panel, our aluminum line runs privacy, semi-privacy and picket styles in powder-coated black, white and wood-grain finishes, carrying a 20-year material and 10-year coating warranty on top of PVAF’s own 5-year workmanship coverage.
It reads sharper against Irwindale’s industrial backdrop than a traditional picket, and every style ships with a matching gate sized to the opening.
We build and install privacy and semi-privacy vinyl fencing, picket and ranch-style rail, pool code enclosures, custom gates in single, driveway and rolling configurations, and both vinyl and aluminum wall toppers for homeowners looking to add height and screening onto an existing block or concrete wall without tearing it down. Every run is fabricated to the measurements we take on site.
An Irwindale quote weighs the same few things any fence job does: total footage, fence height, material choice, number and width of gates, how much grade the posts have to follow, and whether the existing fence has to be torn out ahead of the new install.
A lot next to Irwindale’s industrial or commercial parcels can also run a longer boundary line than a typical residential-only street. A ballpark over the phone is fine to start the conversation, but a firm number takes an actual visit to walk the property.
A fence here can have a working yard on one side and a front lawn on the other, and both faces get looked at. One tone has to sit right against corrugated metal and against stucco. Material sets your room to solve that.
Nothing says a property runs one tone. Sections can be mixed, and a two-tone build puts one shade in the panel and a different one in the frame. Plain, grained and textured groups all pair, and the gate repeats the run.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Profile decides this one. A flat or slatted panel opens the whole metal list, which is three: a grain, plus white and black. The contoured slat is where the list ends, at matte black. Powder coat, not paint, so sun leaves it alone.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
An industrial neighbor pushes the number up. A house two doors down pulls it back. On a parcel that touches both, one property can end up carrying a tall screen at the rear and something lower out front, each built to its own measurement.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
A set of finished vinyl and aluminum jobs from in and around Irwindale, from privacy runs along industrial-adjacent lots to a modern aluminum picket fence fronting a smaller residential parcel near old Route 66 itself, out this way too, nearby.
Irwindale incorporated on August 6, 1957 and remains one of the smallest cities in Los Angeles County, with a 2020 census population of just 1,472. It sits roughly 20 miles east of downtown Los Angeles in the San Gabriel Valley, bordered by Azusa, Monrovia and Pomona, with Historic Route 66 running through it.
The city’s residential parcels are interspersed with industrial and commercial land, a layout that shapes how a fence needs to function here: as much about a clean, defined boundary as about privacy.
Irwindale’s Zoning Code (Chapter 26) caps front-yard fencing in residential zones at 36 inches, while side and interior rear fencing can run up to 6 ft. Within a corner lot’s sight triangle, height is capped at 42 inches above grade so drivers keep a clear line of sight. These are the confirmed numbers; always verify specifics with the Irwindale Building & Safety Division before finalizing a design.
Irwindale requires planning review for fences and walls regardless of height, not only once a fence crosses the 6 ft mark. A building permit is required above 6 ft. That review step is easy to miss if you’re used to a neighboring city’s rules, so it is worth confirming early rather than after materials are ordered.
A pool on the property adds California’s Pool Safety Act on top of the local zoning code: barrier height at least 60 inches, ground clearance under 2 inches, no gap wider than 4 inches, and a self-closing, self-latching gate.
Vinyl qualifies as a non-climbable barrier under that law. On a shared boundary line, the state’s Good Neighbor Fence Act presumes both owners split a reasonable fence cost, with 30 days’ written notice before work starts.
One crew handles an Irwindale fence job from start to finish: a measured estimate, a signed scope of work, a clean install on your own lot, and warranty paperwork handed over before the truck ever leaves your driveway for good.
The price you agree to in the contract is the price you pay, nothing added once the crew starts.
A crew member walks your Irwindale lot, checks the grade and gate widths in person, then hands over a firm number.
Scope, materials, height, gate count and a firm timeline all go on paper before anyone breaks ground on the job.
The crew squares posts to the line, hangs panels and gates, removes the old fence, and clears the yard by nightfall.
Vinyl’s coverage is a transferable limited lifetime; aluminum runs 20 years material, 10 coating, 2 on steel parts.

Real answers on fence materials, upkeep and permits for Irwindale properties near industrial land.
Vertical privacy fencing sets panels edge to edge, cutting sightlines, noise and wind in one continuous run.
Fences blog
Irwindale Fence Installation Questions Answered
Zoning review, sight-triangle rules and material choice near industrial land: here’s what Irwindale homeowners want answered before signing a contract for privacy, pool or perimeter fencing anywhere close to the city’s commercial and industrial-zoned parcels.
Still have a question?
Get in touch and talk with the crew, no pressure attached at all.
Irwindale’s Zoning Code (Chapter 26) caps front-yard fencing in residential zones at 36 inches. Side and interior rear fencing can run up to 6 ft without a building permit.
Always verify current specifics with the Irwindale Building & Safety Division before finalizing a design.
Irwindale requires planning review for fences and walls regardless of height, so a fence under the 6 ft permit threshold can still need sign-off before work starts.
This step is worth confirming early with the Building & Safety Division, since it differs from cities that only review taller fences.
On corner properties, Irwindale caps fence height at 42 inches above grade within the required sight triangle, so drivers keep a clear line of sight at the intersection.
Outside that triangle, the standard front, side and rear height limits apply. Verify the exact triangle dimensions locally.
Both hold up well here. Vinyl privacy panels close every gap for a solid sightline and never need paint.
Aluminum picket and semi-privacy styles read sharper against an industrial backdrop while allowing airflow through. It comes down to how much privacy you want.
Yes. State law sets the baseline: a pool barrier needs at least 60 inches of height, ground clearance under 2 inches, and no opening past 4 inches, with a self-latching gate that swings shut on its own.
Vinyl meets that code as a non-climbable material.
Yes, we work Azusa, Monrovia and Pomona along with Irwindale as part of our Greater Los Angeles service area, using the same crew, materials and warranty coverage regardless of which one the property sits in.