Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
Set in the foothills of the Pomona Valley at over a thousand feet of elevation, Montclair calls for a fence that resists warping, rusting and fading.
Our crew fabricates both materials in-house and has covered the Inland Empire since 2018, with a same-day response to every inquiry.


Montclair sits between Pomona, Claremont, Upland, Ontario and Chino, and homeowners ask for privacy and modern picket lines.
Foothill elevation means Montclair sees a wider temperature swing than the coast, and vinyl holds its color all the way through the PVC, not as a surface coat, so years of heat and sun won’t leave it chalky or faded.
Montclair incorporated in April 1956 and sits at roughly 1,066 feet of elevation in the Pomona Valley, part of the Inland Empire about 30 miles east of Los Angeles. Pomona, Claremont, Upland, Ontario and Chino all border the city, and that inland, foothill setting brings a wider daily temperature range than coastal parts of the service area, which factors into how a fence is built here.
The lineup for Montclair backyards starts with vinyl privacy and semi-privacy screening, moves to pool-code enclosures for properties with a pool, and includes ranch-style rail for open side yards. Aluminum picket and semi-privacy lines add a modern look to a front yard or driveway, each with a matching walk or driveway gate. Both materials come in a full range of styles and colors.
Montclair’s fencing rules run through the San Bernardino County Development Code, and the confirmed figure is a permit requirement for fencing over 6 feet. Exact front, side and rear height limits for residential zones aren’t published in a way we can quote with confidence here, so treat 6 feet as the threshold to watch and confirm your zone’s specific caps with the Montclair Planning and Building Department before finalizing a design.
Statewide, adjoining owners are presumed to share boundary fence costs under California’s Good Neighbor Fence Act, with 30 days’ written notice before work starts, and any pool barrier needs to clear 60 inches with self-closing, self-latching hardware.
Total linear footage sets the baseline, then height and material choice move it from there, vinyl privacy running differently than aluminum picket. Add the number of gates, whatever the ground slope demands in racking, and whether an old fence has to come out before the new one goes in.
Every one of those gets confirmed on a free, no-obligation site visit rather than guessed over the phone, and the written contract locks the final number in before any work starts.

Elevation and inland heat put more stress on materials than a mild coastal climate does. Vinyl’s PVC construction won’t crack or fade the way painted wood does under repeated sun exposure, and aluminum’s powder-coat finish is built to hold its color through the swings between hot days and cooler foothill nights, season after season.
A solid privacy run puts a full face of color along a boundary. An open picket line shows far less of it. Work out how much tone the style actually carries, then choose: vinyl holds the wide range, aluminum a tight set of cured finishes.
Straight picket lines tend to land in the four plain solids. Give a long privacy panel the six smooth grains or the four textured blends instead, where surface has room to show. Tone runs through the board, never sprayed over it.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Metal picket and panel styles both come in black, white or wood grain. A contoured slat is matte black, nothing else. Custom is not on the menu. Every finish is powder coat, cured hard onto the frame, and it takes full sun without help.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
Screening a yard and marking a front line are two different numbers, so the table sorts by style. The job settles it first, the lot second, and the limit named earlier caps both. Sizes are made to order rather than stocked.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
A lightbox below holds real installs from Montclair and nearby Inland Empire communities, in both vinyl and aluminum: privacy panels, pool enclosures and modern picket lines. Open any image full-size, then request your own free, no-obligation estimate.
Montclair incorporated on April 25, 1956, and today is home to roughly 37,865 residents in San Bernardino County. Sitting at about 1,066 feet of elevation in the Pomona Valley, the city is bordered by Pomona to the west, Claremont and Upland to the north, Ontario to the east and Chino to the south, putting it firmly in the Inland Empire about 30 miles from Los Angeles.
The elevation and inland position bring wider temperature swings than coastal cities see: hot days and cooler nights rather than a flat marine layer. That doesn’t call for special hardware, but it does put a premium on materials that don’t warp, crack or fade over repeated heat cycles, which is where vinyl and powder-coated aluminum outperform painted wood.
The San Bernardino County Development Code, which Montclair’s municipal code incorporates, confirms a permit requirement for residential fencing above 6 feet. Specific front, side and rear yard height caps for Montclair’s zones aren’t available in a form we can state precisely here, so confirm your property’s exact limits with the Montclair Planning and Building Department before finalizing a design.
California’s Good Neighbor Fence Act presumes adjoining owners split the cost of a shared boundary fence, with 30 days’ written notice before work begins. Any backyard pool needs a barrier that clears 60 inches with self-closing, self-latching gate hardware, per state code. An HOA covering the property may add CC&R limits stricter than the city or county code, so those private rules are worth checking too.
Reaching out starts a four-part sequence: a visit to price the job accurately, a contract locking in height, material and gate count, a crew that sets posts to the grade, and warranty documents once the last panel goes up.
Nothing shifts after the contract gets signed, from height to gate count. Reach out whenever you’re ready to start.
A crew member walks the property, notes the slope and grade change, and turns that into a firm number, not a guess.
Height, color, gate count and the timeline land on paper before work starts, so the contract price is the price you pay.
Fabrication happens first, then posts go in true to grade, gates hang plumb, and the old material is hauled away.
Warranty paperwork goes home with you: vinyl’s lifetime terms, aluminum’s 20 and 10-year coverage, plus workmanship.

Straightforward reads on upkeep, material choice and what foothill heat does to a fence over time.
A vinyl privacy driveway gate blocks sightlines into the property while also cutting street noise at the curb.
Fences blog
Straight Answers for Montclair Fence Projects
Permits, height limits and HOA rules top the list of what Montclair homeowners want confirmed before they commit to a new fence. What’s verified for this city is below; where San Bernardino County’s specifics aren’t published, we say so and point you to the right department to confirm.
Got another question?
Message or call our team directly for a clear, no-pressure answer.
Montclair’s rules run through the San Bernardino County Development Code, which confirms a permit requirement for residential fencing above 6 feet.
Exact zone-by-zone limits aren’t published in detail, so confirm specifics with the Montclair Planning and Building Department.
Not published in a form we can quote precisely for every zone.
The confirmed threshold is the 6-foot permit line under county code; for your specific front, side or rear yard limit, check directly with Montclair’s Planning and Building Department.
Montclair sits over 1,066 feet up in the Pomona Valley foothills, where temperature swings run wider than the coast.
Vinyl’s PVC carries its color all the way through instead of a painted-on layer, and aluminum’s powder coat is built for that kind of heat cycling.
Yes. Montclair sits inside our Greater Los Angeles service area alongside neighboring Pomona, Claremont, Upland, Ontario and Chino, with a same-business-day response to every inquiry.
If your property is part of an HOA, its CC&Rs can impose stricter limits than the county code allows. Check your community’s guidelines in addition to the municipal and county rules before you plan a design.
Footage, height, material, gate count, slope and whether an existing fence needs removal all factor in. A free, on-site visit turns those variables into one firm written number.