Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
Fit a vinyl or aluminum fence to your Montebello lot as it sits today, from a Whittier Boulevard corner to a quiet block further in.
Serving Greater LA since 2018, our crew fabricates both materials in-house and backs every job with a real warranty.


Montebello’s mix of tight residential lots and busy corridors near Whittier Boulevard calls for a fence that fits the block.
Vinyl privacy suits a lot backing onto a neighbor’s yard, aluminum picket keeps a front yard open while marking the line, and a pool enclosure has to clear state barrier code. Each choice comes down to the lot and the upkeep you want.
Montebello incorporated in 1920 and has been built out since, which means most residential lots here are already fixed in size and shape. A new fence has to work with an existing layout: property lines set decades ago, a driveway width that’s not changing, and a neighbor’s fence already in place on one or both sides.
We measure to what’s actually there rather than a standard plan. That includes matching a new gate to a driveway opening framed decades before automated openers were common.
Montebello sits about 8 miles east of downtown Los Angeles in the southwestern San Gabriel Valley, with East Los Angeles bordering to the west. At this size and density, most of our calls here are straightforward residential jobs: backyard privacy, a front yard picket line, or a gate replacement, rather than large acreage work.
It’s also why we treat every Montebello estimate as its own site visit rather than a phone-only quote, since two lots the same size on paper rarely match once a tape measure is on the ground.
Vinyl privacy and semi-privacy panels are the most common request for backyard boundaries here, with picket and two-tone styles on front yards that face the street. Aluminum semi-privacy and picket suit a modern remodel without closing off the view, and single, driveway and rolling gates get built in either material to match. Wall toppers come up often too, screening an existing block or concrete wall without tearing it out.
A ballpark over the phone is fine, but a real number takes a visit. What moves the estimate: total footage, fence height, vinyl versus aluminum, gate count and width, and whether an old fence has to come out before the new one goes in. A corner lot near a busier intersection can also need extra thought for sight lines at the driveway, which sometimes changes where a gate can sit.

Homes closer to the Whittier Boulevard corridor tend to want more privacy at the front, while quieter residential blocks further from it lean toward an open picket look.
Either way, the gate gets built to match the fence, framed to stay true across a full driveway width, and ready for an automation kit later if you want one. We frame every gate to hold true across the full opening, whether it serves a single walk path or a full driveway.
Frontage here sits within a few steps of the sidewalk, so a tone gets read at walking pace and again from the porch. Pick for the closer look. Either way the color is set when the panels are built, never after.
Boards on a street facing run get looked at close up, and that is where the groups separate. Plain solids give a flat, even face. A milled surface marks the smooth grains, Coastal Cedar included. The textured blends read deepest of all.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Fewer choices on this side, honestly. A grain look, white and black cover the picket and panel profiles. Contoured slats take matte black alone. Powder coat goes on dry and cures under heat, so it holds the metal rather than the surface.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
Close neighbors push the number up; a street frontage pulls it back down. Style has a say too, since a solid run and an open picket do not reach the same place, and the local rule caps what is left. Measurements come off the site first.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Backyard privacy runs, front yard picket lines, and driveway gates built to match: this gallery covers finished vinyl and aluminum jobs in and around Montebello and the surrounding San Gabriel Valley. Quote a project like yours or view the complete set.
Montebello incorporated on October 16, 1920, and sits in Los Angeles County about 8 miles east of downtown LA, in the southwestern San Gabriel Valley. Being a fully incorporated city rather than an unincorporated pocket means one municipal code applies across every residential block here, rather than a mix of jurisdictions.
The 2020 census counted 62,640 residents in Montebello, on a street grid that was largely built out decades ago. Lot sizes and setbacks are mostly already fixed, so a fence project here is usually about fitting new material to an existing property line rather than laying out a yard from scratch.
Montebello borders East Los Angeles to the west, with the wider San Gabriel Valley extending east. The Whittier Boulevard corridor runs through the area and shapes how close some residential lots sit to commercial traffic, part of why privacy tends to matter more on those blocks.
Montebello’s Municipal Code Title 17 (Zoning) governs fence height and placement citywide. As a general pattern, lower residential fences don’t need a permit while taller ones do, but the exact height cutoff and any front, side or rear distinctions specific to Montebello have not been independently confirmed here.
Montebello’s Planning and Community Development Department can confirm the exact cutoff for your address before you lock in a design.
Montebello jobs move through the same four stages every time: a walk of the existing lot line, a signed contract, an install crew that fits the fence to what’s already there, and a warranty handed over at the very finish.
Gate width, height, material choice and old-fence removal go into the contract before the crew ever shows up.
A visit to your Montebello property gets you exact measurements and a real number, not a phone guess.
Scope, materials, height, gate count and timeline go into a signed contract before work begins.
The crew sets posts to your existing property line, hangs panels and gates, then hauls the old fence away.
Aluminum’s 20-year warranty or vinyl’s lifetime coverage both include our five-year workmanship guarantee.

Guides on materials, cost factors and upkeep for Montebello’s established residential blocks.
A solid vinyl run does double duty in Los Angeles: it closes off the yard and holds up as a real pool barrier.
Fences blog
What Montebello Homeowners Ask Us About Fencing
Montebello homeowners most often ask about the Title 17 permit cutoff, fitting a fence to a property line set decades ago, and privacy near the Whittier Boulevard corridor. The six pairs below answer those directly; call for anything more specific to your lot.
Still Have a Question?
Send a message or give us a call for your free, real estimate.
Montebello’s Municipal Code Title 17 (Zoning) sets the citywide fence rules, and lower residential fences are generally exempt while taller ones require a permit.
The exact height cutoff specific to Montebello has not been confirmed here; verify current figures with Montebello’s Planning Department.
It doesn’t change the code, but it often changes what homeowners choose.
Lots nearer the Whittier Boulevard corridor tend to want more privacy at the front, so vinyl privacy or a taller picket line gets requested more often there than on quieter residential blocks further away.
Yes, and in Montebello that’s most of the job. The city built out decades ago, so property lines, driveway widths and neighboring fences are usually already set.
We measure what’s there first and fabricate the new fence to fit it, rather than starting from a standard layout.
California’s Pool Safety Act sets the barrier rules: a minimum 60-inch height, no more than a 2-inch ground gap, no 4-inch openings elsewhere, and a self-closing, self-latching gate that swings outward.
Vinyl is an approved non-climbable barrier material for a pool enclosure.
All of it. Montebello sits inside our Greater Los Angeles service area, from the blocks bordering East Los Angeles to the residential streets further into the San Gabriel Valley.
Vinyl keeps its natural color for good, resists rot, and asks only for a twice-yearly rinse, suiting Montebello’s residential lots well.
Aluminum brings a more modern profile with powder-coated finishes and a 20-year material warranty. Both get a matching gate and workmanship coverage.