Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
Oak View sits in a narrow Ventura River valley, and your yard gets a vinyl or aluminum fence sized to that terrain, not a flat suburban template.
In business since 2018, we fabricate both materials in house and build to Ventura County’s own zoning rules, not a city code.


Oak View is unincorporated Ventura County, so a fence here answers to county zoning rules, not Los Angeles code.
Fence choice here splits by lot position: open picket styles hold to the county’s under-3-foot front yard rule, while full-privacy panels line rear yards that back onto oak woodland or sit along the county line.
Oak View sits in a tight stretch of the Ventura River valley, wedged between rolling, oak-covered hills. Lots here run wider and more rural than a typical LA subdivision, and many share a fence line with native oak woodland rather than a neighbor’s driveway.
Vinyl handles that setting well: it needs no paint, resists the moisture that valley shade can hold onto, and racks cleanly along an uneven, sloped property line. Aluminum stays available too, in a modern style, for owners who want an open, contemporary look along a valley-facing yard.
Because Oak View is unincorporated, fences fall under the Ventura County Zoning Ordinance rather than any city’s municipal code. Front yard fences generally stay under 3 feet unless the style is at least half open, such as a picket or an open aluminum design, which can run taller under the county’s exceptions.
Once a fence and any retaining wall together pass 10 feet measured from the lower grade, a building permit is required. Side and rear yard limits are not spelled out as clearly in the published ordinance, so we always confirm the exact figure with Ventura County’s Planning Division before finalizing a design.
Rear yards facing the valley usually take full-privacy vinyl, while front yards along the street run to open picket styles that stay inside the county’s under-3-foot rule. Ranch-style rail fencing suits the wider rural parcels around here, pool enclosures follow the state barrier code, and aluminum gates are sized to the driveway they close, gravel or paved.
Every Oak View quote is different because the factors behind it vary by lot: total footage, fence height, number of gates, how much grading a sloped or oak-lined section needs, and whether an old fence has to be cleared first. A phone call gets a ballpark. A free on-site visit gets an exact number once the crew sees the actual grade.

Vinyl never yellows in the sun, and its coverage transfers to the next owner for the life of the fence, backed by our own 5-year labor guarantee.
Set in a narrow valley, Oak View can funnel wind in ways a flat subdivision never does, and metal inserts go inside the vinyl rails on request: it looks vinyl outside, but takes any realistic wind this valley gets. Aluminum’s coating carries a 20-year material and 10-year coating warranty on top of that same labor guarantee.
The material settles how big this decision is. One range is graded and long, the other stops early. Nothing says the run along the road and the run behind the house have to land on the same answer.
Decide by group before you decide by shade. Four solids stay plain across a long rural run. Six grains put milled timber into the face. Four blends push relief further again, enough to catch low afternoon light.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Ask the same question of aluminum and the answer comes back shorter. Most profiles take wood grain, white or black. The contoured slat stays matte black. Every one is powder coat, cured under heat.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
The far side of a fence out here can be a road, another wide parcel, or nothing much at all, and that moves the number as much as style does. Treat the spans below as ceilings, then trim to what the county allows.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
These photos cover vinyl and aluminum fencing completed around Oak View and the surrounding Ventura River valley, from open front-yard picket runs to full-privacy rear yards along oak-shaded lot lines, before you request your own free on-site estimate.
Home to roughly 6,215 residents, Oak View carries no city hall of its own; it is an unincorporated, census-designated place within Ventura County. It sits about 50 miles northwest of Los Angeles along the Ventura River, in a bedroom community tucked into a narrow valley. Oak View ranks as the third-largest community between the towns of Ojai and Ventura, flanked by Casitas Springs on one side and Mira Monte on the other.
The community sits within easy reach of Ojai to the east and the city of Ventura to the west, with Lake Casitas nearby. That valley position, framed by native oak woodland and rolling hills, gives Oak View a semi-rural character that shapes lot sizes and fence styles differently than a dense LA neighborhood.
A narrow valley setting means many Oak View lots slope more than a flat subdivision, and fence lines often run along or through oak woodland rather than a straight suburban boundary. Posts get set to the actual grade here, not a flat assumption, and materials are chosen to hold up under valley shade and moisture.
As an unincorporated area, Oak View answers to the Ventura County Zoning Ordinance. Front yard fences generally stay under 3 feet unless the style is at least half open. A fence plus retaining wall combination over 10 feet from the lower grade needs a permit. Side and rear yard limits are not clearly published, so verify those specifics with the Ventura County RMA Planning Division before setting posts.
Whether the lot is a tight valley parcel or a wider rural property near the river itself, an Oak View fence job runs through the identical four stages every time, so nothing about the process ever comes as a surprise to you.
No guessing on grading, and no pricing conversation left until the crew shows up on site itself.
Someone drives out, sizes up the valley grade and lot line against county rules, and leaves a real number.
Style, height, material and timeline get written into a signed contract before a single post goes into valley ground.
The crew sets posts to the actual grade, hangs panels and gates true, clears the old fence, and cleans the site.
Vinyl carries transferable lifetime coverage, aluminum carries 20-year terms, our 5-year labor guarantee backs both.

Practical reads for Oak View homeowners on materials, valley upkeep, and county permit questions.
Once a patio furniture cover comes off, the cushions and frame underneath are already clean and ready to sit on.
Fences blog
Oak View's Fence Questions, All Answered
Ventura County rules instead of city code, permit thresholds, HOA questions, and exactly how narrow valley terrain changes a standard install plan: this is what Oak View homeowners usually want cleared up before any real work around here ever starts.
Got another question?
Call or send the form, and expect a straight, honest answer fast.
Oak View is an unincorporated community in Ventura County, so fences answer to the Ventura County Zoning Ordinance rather than any city’s municipal code.
That is different from most Los Angeles neighborhoods nearby, which fall under Los Angeles Municipal Code instead.
Front yard fences generally stay under 3 feet under the Ventura County Zoning Ordinance, unless the style is at least half open, such as a picket design, which can run taller under the county’s exceptions.
Verify your exact lot and style with Ventura County’s Planning Division.
A building permit is required once a fence and any retaining wall together exceed 10 feet in total height, measured from the lower grade.
Shorter installs generally do not trigger that threshold. Confirm specifics with Ventura County’s RMA Planning Division before work begins.
Ventura County’s published zoning ordinance does not spell out a separate side and rear yard number for unincorporated communities like Oak View the way some city codes do.
Verify the exact figure for your property with the county’s Planning Division before finalizing a design.
Yes. Oak View sits between Ojai and the city of Ventura along the river valley, and we schedule installs across that stretch, from Casitas Springs to Mira Monte and the surrounding county-line properties.
Some Oak View properties belong to an HOA, and those rules can set tighter height or material limits than the county allows on its own.
Check with your association first; the tighter of the two numbers is the one we design and build to.