Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
Panorama City runs dense, with houses set close together across the San Fernando Valley, and a fence here has to earn the privacy the lot lacks.
Our crew fabricates and installs vinyl and aluminum in house, in heights up to 8 ft on qualifying lots, with a free, no-obligation estimate.


Panorama City is one of the denser San Fernando Valley neighborhoods, and closer lot lines put privacy near the top of most requests.
A side-yard privacy run between two closely set Panorama City homes calls for a different plan than a wider corner lot. Height, style, gate placement and whether an older fence needs removal get worked out on site before materials are ordered.
Panorama City is a planned, densely built neighborhood, with a population well above 62,000 packed into a compact stretch of the San Fernando Valley near Van Nuys and North Hills. Closer lot lines are the norm, which is why tongue-and-groove vinyl privacy panels, with no gaps between boards, are one of the most requested styles here.
Semi-privacy and picket styles suit front yards where full screening is not the goal, and pool-code enclosures come up often given how many backyard pools sit on these tighter lots.
Los Angeles Municipal Code allows side and rear fencing up to 8 ft on R-zoned lots at least 40 ft wide on non-hillside ground, above the standard 6 ft cap. On a lot that qualifies, that extra height buys real screening between neighbors on ground that otherwise offers little separation.
We build vinyl in custom heights from 2 to 8 ft and rack every panel to the actual grade of the yard, so the line follows the ground rather than stair-stepping over it.

Most requests here land on vinyl: full-screen privacy panels, semi-privacy where some airflow is fine, and picket for an open front-yard look, plus pool-code enclosures for backyard pools and wall toppers that raise an existing block wall without starting over.
Aluminum brings a modern privacy or picket line in powder-coated black, white, or a wood-grain finish, and every style comes fitted with a gate matched to the opening itself, a single walk door on one end of the range and a full double-drive width on the other, framed to take an automation kit later since we don’t supply the motor.
A handful of factors set the scope on a Panorama City job: total footage, fence height, vinyl versus aluminum, how many gates and what width, and whether an old fence needs to come out first before the new one goes in. A free, no-obligation on-site visit is what turns that whole checklist into an actual number, not a guess.
Vinyl’s color runs through the material, so it does not yellow in the sun and never needs repainting, just a rinse twice a year to stay clean. It carries a transferable limited lifetime warranty, and a scrape from a gate hinge or a stray bike pedal never exposes a different color underneath.
Our aluminum line carries 20-year material, 10-year coating and 2-year steel-component coverage, and every install, either material, also carries our own 5-year workmanship warranty on top of whichever coverage applies to the panels themselves.
One decision covers more than the fence, since the gate closing the run wears the same color. Get the tone right for the house and the opening looks after itself. Vinyl holds the deep list here, aluminum a tight one.
Look at the groups, not the individual squares. Plain solids, white and clay among them, keep a panel quiet. Wood grains put a timber face on it. Textured blends push the surface furthest of the three.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Powder arrives dry, takes a charge, then heat locks it onto the aluminum. On slat and panel styles that finish comes three ways, a grain look sitting alongside black and white. A contoured slat is matte black only.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
A screen only works if it clears the sightline it was built for, so start with the window or the deck you want covered. Style caps the span from there, and the code settles the top of it.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Flip through finished vinyl and aluminum fences built on Panorama City’s tighter lots: tongue-and-groove privacy runs, picket styles, pool enclosures and matching gates, shown once the whole crew has fully packed up and the site is left clean.
Panorama City is a neighborhood of the City of Los Angeles in the San Fernando Valley, ZIP code 91402, with a population above 62,000. It borders Mission Hills, Arleta, Sun Valley, Valley Glen, Van Nuys and North Hills, and its landmarks include the historic Panorama Mall and Plaza del Valle.
It is one of the more densely built neighborhoods in the Valley, planned from the start as a self-contained community rather than growing up gradually around a single main street the way many older Valley neighborhoods did.
Closer lot lines and smaller side yards are the norm across Panorama City, which puts full privacy screening at the top of most requests rather than a decorative picket line. A tongue-and-groove vinyl panel with no gaps does the job a lower or open-style fence cannot on a tight side yard between two homes, and it holds that privacy without the sightline gaps that chain-link or spaced pickets leave behind, year after year.
LAMC 12.22 C.20(f) limits front yard fencing to 3.5 ft, and lets side and rear runs reach 6 ft, or 8 ft on R-zoned lots at least 40 ft wide, non-hillside. A non-masonry fence, such as vinyl, needs a building permit only above 10 ft, while masonry or concrete construction crosses that line at just 3.5 ft.
If an HOA governs the property, its rules can be stricter and would apply on top of the city’s. Lot eligibility for the taller allowance is worth confirming directly with the Los Angeles Department of City Planning ahead of ordering materials.
Every Panorama City fence job moves through the same four stages, whether it is a tight side-yard privacy run or a full perimeter built out at the taller 8 ft allowance: free estimate, written contract, the build, then warranty.
Height, style and gate count all get confirmed in writing before the crew ever arrives on site.
Someone measures the lot in person, checks lot width for the 8 ft allowance, and leaves a real number that day.
Scope, materials, height, color and gate placement are written down before a single tool touches the yard.
Posts go in first, then the panels go up, gates get hung, and any old fencing is hauled off site.
Vinyl’s paperwork transfers if you sell, no expiration attached; aluminum’s own terms come with our workmanship on top.

Reads on privacy styles, height rules, material choice and upkeep for Panorama City’s closer lot lines.
Years outdoors barely touch a vinyl pergola, since it skips the sanding, sealing and repainting a wood frame eventually needs.
Fences blog
Panorama City Fencing, Questions Answered
Panorama City homeowners bring us questions on privacy for close lot lines, the taller side-yard allowance, permit thresholds and how HOA rules can layer on top of the city code. Send anything else through the form below and a real person answers it.
Still have questions?
Message the office or give us a call; we'll set up a site visit.
Yes, on qualifying lots. Los Angeles Municipal Code 12.22 C.20(f) allows side and rear fencing up to 8 ft on R-zoned lots at least 40 ft wide on non-hillside ground, above the standard 6 ft cap.
Verify your lot’s eligibility with the Los Angeles Department of City Planning.
Yes. LAMC 12.22 C.20(f) requires a permit for masonry or block once it tops 3.5 ft, while vinyl and aluminum stay permit-free up to 10 ft.
It’s a main reason most privacy projects here use panels instead of block. Confirm specifics with LA’s Planning Department.
Front yard fences are capped at 3.5 ft under Los Angeles Municipal Code 12.22 C.20(f), the same limit that applies across the city. The taller allowance applies only to side and rear runs on qualifying lots.
Tongue-and-groove vinyl privacy panels, built with no gaps between boards, are the most requested style across Panorama City’s closer-set lots.
Semi-privacy or picket styles suit front yards where full screening is not the goal.
An HOA’s CC&Rs can set tighter limits than Los Angeles Municipal Code does, and on Panorama City’s closer lots that is common, so the stricter number wins.
Check your HOA’s paperwork alongside the city’s height rules before finalizing a design.
Timeline depends on footage, height, material and whether an old fence needs removal first, which is why the written contract spells out a schedule up front.
Taller 8 ft sections add planning time but not necessarily install days.