Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
Whether your lot sits on Lincoln Park’s tight historic grid or a wider Phillips Ranch parcel, you get a privacy or picket fence racked to its own slope.
We fabricate every panel to order and back the install with a 5-year workmanship warranty on top of the material’s own coverage.


Pomona homeowners call on us for privacy panels that hold up on both tight city lots and wider suburban yards.
From Downtown’s older parcels to Phillips Ranch’s newer streets, each yard gets a fence sized to its own lot line and grade, not a one-size layout copied from the last job we finished somewhere else across town.
Pomona’s neighborhoods don’t share one footprint. The Lincoln Park historic district packs 821 structures into 45 blocks of narrow, closely built lots dating from the 1890s through the 1940s, while Phillips Ranch is a newer master-planned community of roughly 3,600 homes spread across 2,200 acres of wider, more uniform parcels.
A privacy run that racks cleanly on a tight Lincoln Park lot needs different post spacing and gate placement than one running the long side yard of a Phillips Ranch property. We measure the actual grade and lot line before quoting either.
Pomona’s fence rules work by threshold rather than a flat front or side yard cap. Under Pomona Municipal Code §15.1.010, a fence of any material stays permit-free up to 6 ft, measured from the lowest adjacent grade; go above that line and a building permit applies.
Concrete or masonry walls and pilasters trigger the same requirement above just 3 ft. Yard-specific limits beyond that threshold should be confirmed with the Pomona Planning Division or Building and Safety Division before a design is finalized.

Pomona sits within a Local Responsibility Area, with the LA County Fire Department providing protection and fire hazard severity zones mapped under state standards.
In areas like this, material choice carries real weight: vinyl doesn’t feed a fire the way untreated wood can, and it never needs the periodic sealing or staining that keeps a wood fence from becoming a liability. Aluminum holds its powder-coated finish through dry Pomona summers without warping or rusting through.
Homeowners here ask most often for privacy and semi-privacy vinyl panels, picket styles for a lighter street-facing look, and aluminum gates for driveway spans. We also build ranch-style rail fencing suited to larger Phillips Ranch-style parcels, pool enclosures that meet state barrier code, and wall toppers that raise the height of a standing block wall and add screening without a teardown.
No two Pomona quotes land the same. Footage, whichever height you land on, vinyl versus aluminum as the material, gate count and width, and whatever racking a Lincoln Park lot line or a Phillips Ranch slope requires all factor into the number, plus removing an old fence before the new one goes up. A phone call gets you a rough range; the free on-site visit turns that into a figure you can actually plan around.
A tight lot shows a fence at close range. A wider parcel shows the whole run at once. Same swatches either way, but scale changes what a tone does. Vinyl carries the long list, aluminum the short one, and neither gets painted.
One set of three groups serves every style here, sorted by surface. Four plain tones run white through gray. Six wood grains carry milled texture, Slate Gray among them. Four blends hold the deepest relief. Gates match what they hang on.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
A driveway leaf and a picket line pull from the same short list. Slatted and panel styles offer a grain look, black and white. The contoured slat wears matte black, full stop. Powder coat does the rest, heat fused, and nothing is custom.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
Pomona hands you two problems: a run hemmed in by neighbors, or a long line across an open parcel. Style sets the outer span, and the table lays those out. The number you build to answers to purpose, ground and the code.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
These photos capture privacy runs, picket fronts and aluminum driveway gates installed across Pomona, from tight Lincoln Park lots near Downtown to wider parcels out toward Phillips Ranch. See what fits your own lot before you make the call.
Pomona incorporated in 1888 and became a charter city in 1911. Today it’s home to roughly 151,713 residents in Los Angeles County, sitting about 30 miles east of downtown Los Angeles. It sits between San Dimas and La Verne, with Claremont, Montclair, Chino and Chino Hills close by, and Diamond Bar, Walnut, South San Jose Hills and Industry rounding out its neighboring communities.
Pomona’s layout runs from dense to spread out block by block. Downtown, the Pomona Arts Colony and the Lincoln Park historic district carry narrow, closely spaced lots along corridors like South Garey Avenue, Temple Avenue, North White Avenue and Second Street.
Phillips Ranch, on the other hand, is a master-planned community of about 3,600 homes on 2,200 acres of wider parcels. Cal Poly Pomona, the Fox Theater and the American Museum of Ceramic Art sit within that same mix of old and new streets.
Pomona lies within a Local Responsibility Area, with the LA County Fire Department covering fire protection and severity zones mapped to state standards. That context matters when picking a fence: vinyl and aluminum both skip the upkeep wood needs to stay fire-safe over time.
Pomona doesn’t publish a flat height cap by yard; instead Municipal Code §15.1.010 sets a building-permit threshold of 6 ft for a fence of any material, and 3 ft for masonry walls or pilasters. Confirm any project against that threshold with the Pomona Planning Division or Building and Safety Division before finalizing a design.
Four steps take a Pomona project from first call to finished fence, no matter whether your lot sits on a tight Lincoln Park block or a wide Phillips Ranch parcel out near Cal Poly Pomona and the downtown Arts Colony district.
No pressure, no surprise line items once our crew shows up ready to build your fence right the first time.
A crew member walks the property, measures the run, and checks the grade before pricing anything in writing.
The scope is set in writing before any post goes in: materials, colors, height, gate count, and a firm timeline.
Posts are set plumb and level, panels and gates get hung, the old fence comes down, and the yard is swept clean.
Vinyl’s coverage transfers for life; aluminum backs its coating and material 20 and 10 years, plus 5-year workmanship.

Straight reads on material choice, upkeep and Pomona’s permit threshold before your project starts.
Rot, corrosion and insects wear down wood and metal fences over time, conditions gray vinyl simply does not react to.
Fences blog
Pomona Fence Installation Questions, Answered
Before a Pomona project starts, most homeowners want the same few things cleared up: the city’s building-permit threshold, its fire-hazard zone status, and which neighborhoods, from Phillips Ranch to the Lincoln Park historic district, we already build fences in.
Still Have a Question?
Reach out anytime and a real person gets back to you before the day ends.
Pomona works on a permit threshold rather than a flat cap: under Municipal Code §15.1.010, a fence up to 6 ft, measured from the lowest adjacent grade, needs no permit.
Masonry above just 3 ft does. Confirm specifics with the Pomona Planning Division first.
Pomona’s code centers on the 6 ft building-permit threshold rather than separate published front, side and rear caps.
Anything near or above that line, or any masonry element above 3 ft, should be checked against current zoning with the city’s Planning Division before a design is finalized.
Yes. We work across Pomona’s full range of lot patterns, from Phillips Ranch’s wider master-planned parcels to the narrower, closely spaced lots of the Lincoln Park historic district and Downtown.
Pomona sits in a Local Responsibility Area with fire hazard severity zones mapped by the state.
Vinyl and aluminum both skip the sealing and staining wood needs to stay fire-safe, which makes either a practical choice in this setting.
Pomona neighborhoods built as planned communities, like Phillips Ranch, often carry an HOA layered on top of city rules.
Its CC&Rs can set a tighter limit than the municipal code, so check those documents before finalizing a design.
Yes. Vinyl comes in colors that read like wood and finishes that read like wrought iron, which lets a new fence sit comfortably next to the older character found around Downtown and the Lincoln Park historic district.