Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
Your South El Monte fence gets built for flat, inland-valley lots and hot summers, with the option to add decorative iron for extra front-yard height.
We fabricate and install both materials ourselves, licensed since 2018, and vinyl carries a transferable limited lifetime warranty on top.


Flat valley yards, corner lots and everything between: our crew builds and installs both materials across South El Monte.
Lot layout, sun exposure and how much privacy the street calls for all shape which material and height fit best. Browse the styles below, then request your free on-site estimate; a reply usually lands the same business day.
Vinyl handles South El Monte’s flat, alluvial lots and hot inland summers well. Privacy panels lock tongue-and-groove with no gap, picket runs keep the open look many streets already carry, ranch rail suits the wider side yards common here, and pool enclosures meet the state barrier code with a self-latching gate.
Because the color is worked into the vinyl itself and not just coated on, more than ten colors and ten styles resist flashing white at a scrape or yellowing under the valley sun. Heights run custom from 2 to 8 ft, racked to the lot’s grade, and upkeep is a rinse twice a year, nothing more.
Where the look leans modern, our aluminum line covers privacy, semi-privacy and picket styles, with slats that seal up for full coverage or stay open for airflow, in black, white or a wood-grain finish.
The coating carries an ASTM E84 Class A flame and smoke rating and takes seasonal Santa Ana wind gusts in stride. Aluminum is warranted for 20 years on material, 10 on the coating, 2 on steel components, plus our own 5-year workmanship on top. Gates come in single, driveway and rolling configurations to match.

Every style ships with a matching gate, sized from a narrow walk-through to a full driveway span with extra framing built in so it holds true and takes an automation kit later if you add one.
South El Monte’s code also allows extra front-yard height when at least half the fence face is decorative wrought iron over a decorative block base, an option worth raising at your estimate. Small jobs and odd angles are work we take on, from a single gate swap to a corner lot with an awkward sight-triangle setback.
Footage, height, material choice, gate count and site grading all shape the final price, and hauling away an old fence first is its own added factor. On corner lots near an intersection, sight-triangle setbacks can also affect layout, one more reason a phone guess only ever gets you a rough ballpark. A real number comes from a free, on-site, no-obligation visit, typically answered the same business day it comes in.
South El Monte gets the whole vinyl and aluminum lineup: backyard privacy, open picket runs, ranch rail, pool enclosures, custom heights from 2 to 8 ft, and gates built to match every one of those styles.
Level ground is quietly useful: the tone you approve on a square is the tone the finished run gives back, with no steps to break it up. Below, the choice divides by material, and the two halves are nowhere near the same size.
A corner lot is where mixing pays: a plain solid on the street run, a smooth grain or a textured blend where people stand close. Four plain, six grains, four blends, and a gate is built in whichever one you land on.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
No brush, no roller, no touch-up can. The powder goes on with a charge and heat fuses it, so afternoon sun changes nothing. Range is the trade: two neutrals plus a grain finish, and matte black alone once the slats are contoured.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
On even ground one number repeats the whole length of a run, so a wrong one shows everywhere. Each style below stops at its own limit. What the yard needs and what the city permits decide which limit you build to.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
These photos are vinyl and aluminum fences finished in and around South El Monte, from flat backyard privacy runs to open picket lines near the Rio Hondo. Nothing shown is a stock photo, so panel style, color and gate hardware match your lot.
South El Monte was incorporated on July 30, 1958, and sits in the San Gabriel Valley about 18 miles east of downtown Los Angeles, home to roughly 19,567 residents. The Rio Hondo River and San Gabriel River form natural boundaries around the city, with the I-605 and SR-60 freeways running close by.
Neighboring communities include El Monte, Rosemead, Temple City, Monterey Park, Montebello, Pico Rivera, Whittier, West Covina, South San Gabriel and Avocado Heights.
Sitting on flat, alluvial terrain away from the coast, South El Monte sees hotter summers and no salt-air exposure, which keeps aluminum’s coating and hardware in easier condition here than on a bayfront or coastal lot. Seasonal Santa Ana wind still pushes on tall panels, why exposed runs get a metal insert inside the vinyl rail: it looks vinyl from the street, but the metal core carries the load.
South El Monte’s code sets a 40-inch height limit within the triangular sight-line area at street corners, measured from points 40 ft out from the intersection along each curb. That rule matters most on corner parcels near the city’s major crossings, worth checking before finalizing fence placement on a corner lot.
Under South El Monte’s Municipal Code section 17.05.080, front yard fences cap at 4 ft, or up to 5 ft when at least half the fence is decorative wrought iron over a decorative block base. Side and rear yard limits and the residential permit threshold are not spelled out in the accessible code text, so confirm current numbers with the South El Monte Planning and Building Department before starting work.
A South El Monte fence job runs through four clear stages, from an on-site measurement of your flat valley lot through to a signed warranty on a finished panel line, and each step stays in view before the next one begins.
Nothing about scope, height or price changes once digging starts; that gets nailed down in the quote first.
Our crew walks the lot in person, measures every run and corner, and gives you a solid number, not a phone guess.
Height, material, gate count and any decorative iron accents go into a written quote before work is scheduled.
Posts go in first, set plumb and to grade, then panels and gates follow, with the old fence hauled off after.
Vinyl’s lifetime warranty, aluminum’s 20/10/2-year terms and our 5-year workmanship get handed over in writing.

Practical reads on inland heat, upkeep and material choice for South El Monte-area homeowners.
Vertical privacy fencing sets panels edge to edge, cutting sightlines, noise and wind in one continuous run.
Fences blog
Fencing FAQs for South El Monte Homeowners
Permits, corner-lot setbacks, decorative iron height rules, inland climate and which streets we reach: this covers what most South El Monte callers want to know before booking, whether the lot sits near I-605 or SR-60. Direct answers below, no sales pitch attached.
Got Another Question?
Text, call or message us; someone answers personally, same business day.
South El Monte’s residential fence code sets height limits but does not spell out a specific permit threshold in the sections reviewed.
Treat a new fence as permit-possible and confirm requirements with the South El Monte Planning and Building Department before work starts.
Under the city’s Municipal Code section 17.05.080, front yard fences cap at 4 ft, or up to 5 ft if at least half the fence is decorative wrought iron over a decorative block base.
Confirm your exact allowance with the Planning and Building Department before finalizing a design.
On corner parcels, the code limits fence height to 40 inches within the triangular sight-line area, measured from points 40 ft out from the intersection along each curb.
This affects placement on corner lots near busy crossings and is worth checking before work begins.
Being inland and away from the coast, South El Monte sees hot summers but no salt-air exposure, which keeps aluminum’s coating in easier shape here than on a bayfront lot.
Seasonal Santa Ana winds still call for a metal insert inside taller vinyl runs.
Yes. South El Monte’s code allows a front yard fence up to 5 ft, one foot taller than the standard 4 ft cap, when at least half the fence face is decorative wrought iron over a decorative block base.
Ask about this option at your on-site estimate.
Alongside South El Monte, we reach neighboring El Monte, Rosemead, Temple City, Monterey Park, Montebello, Pico Rivera, Whittier and West Covina.
A same-business-day reply follows any free, on-site, no-obligation estimate request.