Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
A fence around a Toluca Lake yard has to read as sharp as the neighborhood it sits in, whether it lines a quiet street or backs onto the golf course.
Pro Vinyl and Aluminum Fencing has fabricated custom vinyl and aluminum fencing across LA since 2018, sized to the neighborhood’s own code.


Fencing requests around Toluca Lake typically involve privacy runs, pool enclosures, or aluminum lines built to match the block.
Every quote starts on site: lot width, fence height, gate count, and whether the existing fence needs to come out before the new line goes in and gets racked properly to the grade of the yard itself, start to finish.
Toluca Lake is a small, established Los Angeles neighborhood, and the fences here tend to match that: precise, well finished, and built to blend into a block that has looked the same for decades rather than stand out from it.
Whether the job is a rear-yard privacy run behind a house near the golf course or an aluminum picket fence facing a quiet street off Cahuenga Boulevard, we set posts to depth, rack panels to the actual grade of the lot, and hang gates that swing true from day one.
Most calls here are for privacy fencing along a side or rear line, semi-privacy vinyl where some airflow still matters, or an aluminum picket fence that reads clean from the sidewalk.
We also build two-tone vinyl, pool enclosures that meet state barrier rules, wall toppers that raise an existing block wall without demolishing it, and matching gates from a single walk-through to a full driveway span. Vinyl comes in ten-plus colors and styles; aluminum finishes run from powder-coated black and white to wood-grain tones.
The number always comes down to the same handful of variables: total footage, fence height, the material and style selected, how many gates and how wide, and whether an existing fence has to be removed and hauled away before the new one goes in. A phone estimate is useful for early planning, but the figure that holds is the one written after someone has actually walked the lot.
Toluca Lake’s private lake and the historic Lakeside Golf Club, designed in 1924, give the neighborhood a settled, established character that most fences here are built to respect rather than compete with.
Vinyl fits that brief well: its pigment is mixed directly into the PVC rather than sprayed on afterward, so the finish holds for years without a repaint, and a two-tone privacy run can be matched closely to an existing exterior. Aluminum’s clean picket and semi-privacy lines suit the more architectural homes near Valley Spring Lane just as well.

Because Toluca Lake is a compact, well-kept neighborhood near Studio City and North Hollywood, a fence installed here is seen by neighbors on both sides and across the street, not tucked away on a large rural lot. That is exactly why we measure on site before quoting anything: height, gate placement, and finish all get chosen to fit the specific block. Every estimate is free and comes with no obligation to move forward.
One property can want metal around water and vinyl along the side line, and the two draw from separate ranges. Material decides first. After that, one range takes real time to work through and the other takes a moment.
Mixed sections are ordinary work, so a body color from the plain solids can carry a frame pulled from the grains. Three groups stand behind that: flat solids, wood grains milled to show timber, and blends with the coarsest face.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Shorter list on the metal, and no way around saying so. White, black and a timber look cover the flat and the slatted profiles. Slats with a contour drop even that, taking matte black alone. Heat sets the powder in place.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
Take the table style by style. Each row belongs to one design and shows how far that design goes, which is a different question from how far your property should go. The property and the limit that applies here answer that one.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
A set of vinyl privacy runs, aluminum picket fences, and gate builds from recent Toluca Lake, Studio City, and North Hollywood jobs sits below, worth a scroll before any design decision gets made for your own yard sometime soon this season.
Toluca Lake is a Los Angeles neighborhood near North Hollywood and Studio City, roughly 10 miles northwest of downtown, with a 2008 estimated population of 8,563.
The neighborhood takes its name from Toluca Lake itself, a six-acre private body of water that is completely inaccessible to the public, and it is anchored by the historic Lakeside Golf Club, designed in 1924. Cahuenga Boulevard and Valley Spring Lane run through the area, and the neighborhood borders Universal City, Studio City, and North Hollywood.
With a modest year-round population and a footprint built around a private lake and a decades-old golf club, Toluca Lake reads as a settled, established neighborhood rather than a newer subdivision. Fences here tend to be seen up close by neighbors on every side, which is one more reason a precise, well-finished install matters more than it might on a larger, more isolated lot elsewhere.
Toluca Lake falls under Los Angeles Municipal Code 12.22 C.20(f), the same ordinance covering the city’s residential neighborhoods generally. The front-yard ceiling sits at 3.5 ft, while side and rear property lines are allowed to reach 6 ft without additional sign-off.
A non-masonry fence, which covers both vinyl and aluminum, only needs a building permit once it passes 10 ft in height; a masonry or concrete wall requires one at any height above 3.5 ft.
Pool barriers instead follow the state Pool Safety Act: a 60 in minimum height, a maximum 2-inch gap beneath the barrier, no 4-inch openings, and a gate that self-closes and self-latches while swinging outward.
Where an HOA applies, its rules can set a stricter limit than the city code does. Verify current requirements with the City’s Planning Division before finalizing any design, since code sections and thresholds are subject to change over time.
From the first call to the finished fence, a Toluca Lake job covers four stages: an on-site estimate, a signed contract locking in scope and price, a single build day with one crew, and warranty paperwork delivered at the final walkthrough.
No pressure, no vague numbers, and no surprise costs once the crew shows up on site to build it.
One of our team walks the property, notes the layout, and works up a price for height and gates before moving forward.
Scope, colors, height, and gate count go on paper first, so the price you agree to matches the final invoice.
Posts are set first, then panels and gates go on and get squared up, with the old fence hauled off same day.
Vinyl’s warranty runs a transferable lifetime term; aluminum’s runs 20 years on material, with workmanship covered too.

Straightforward reads on upkeep, materials, and permit questions for Toluca Lake homeowners.
Vertical picket fencing in Los Angeles trades painting and staining for a boundary that never needs either.
Fences blog
Your Toluca Lake Fence Questions, Answered
What LA’s code allows near the private lake, how an HOA’s own rules can stack on top of that citywide code, and what a realistic install timeline looks like: here is what Toluca Lake homeowners tend to want cleared up before a fence actually gets built.
Have a question for us?
Send a message or call, and expect a reply within that same business day.
Under Los Angeles Municipal Code 12.22 C.20(f), Toluca Lake fences top out at 3.5 ft along the front yard, while side and rear property lines can reach 6 ft without further approval.
Confirm current specifics with the City’s Planning Division first.
A non-masonry fence, which covers vinyl, only needs a building permit once it passes 10 ft in height, whereas any masonry or concrete wall needs one no matter how tall it is past 3.5 ft.
Verify the threshold with the City’s Planning Division first.
California’s Pool Safety Act sets barriers at 60 in minimum, caps the gap beneath at 2 in, and bars any opening wide enough for a small child to pass through.
Barrier gates must swing outward and self-close and self-latch. Vinyl qualifies as an approved material under that law.
No. Toluca Lake is a neighborhood inside the City of Los Angeles, not its own incorporated city, so fence height and permits run through LA Municipal Code 12.22 C.20(f) rather than a separate local code.
The same citywide rule applies near the lake and the golf course alike.
Yes. Lots backing onto the Lakeside Golf Club area get the same measured approach as any other yard: height, screening, and gate placement chosen on site to fit the specific property line and the neighbor’s sight lines.
Yes, both border Toluca Lake and fall inside our regular Greater LA service area, along with Universal City. The same crew, materials, and warranty terms apply no matter which of these neighborhoods the property sits in.