Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Vinyl and Aluminum Fencing for Whittier Yards
Fence Contractor in WhittierA Whittier fence sized to your lot, its slope, and the front-yard limits: low-maintenance vinyl or modern aluminum, custom-made by a licensed installer.
Both come custom-fabricated to the height your yard allows, backed by a 5.0 star rating across Greater LA. Book a free on-site estimate.
- 5-Star Reviews
- 350+
- Warranty
- Lifetime
- Projects Completed
- 1000+
Get your free estimate today
Fencing in Whittier, done two ways
Pick from two fence materials built for Whittier yards: low-maintenance vinyl and modern aluminum, both installed and made to order.
Two things make a Whittier fence job its own: the ground and the code. Much of the city rises into the Puente Hills, so lots slope and panels step with the grade. And front-yard height limits shift with your lot width, not one flat number.
Vinyl and aluminum, built for Whittier yards
Two materials cover most Whittier yards, and we build both start to finish. Vinyl is the low-maintenance workhorse: privacy or picket styles, colors that never need paint, easy on the budget. Aluminum is the modern, architectural pick, powder-coated and clean-lined for a sharper street look. Both are custom-fabricated in house to the height your yard needs.
Which vinyl fence fits your Whittier yard?
Vinyl covers most Whittier yards, and the style follows what you want the fence to do. For full screening there is horizontal and vertical privacy, plus a frosted acrylic panel that passes daylight while blocking the view.
Lower and decorative means pickets, flat, straight, scalloped, or arched, and privacy panels can carry a lattice or picket topper. Color runs through the vinyl instead of sitting as paint on top, in 14 shades across three families. We fabricate custom heights from 2 to 8 feet, and on a slope the panels rack to step down with the grade.
Modern aluminum fencing and gates
Aluminum is the choice when you want sightlines and a modern edge instead of a solid wall. The powder-coated finish holds color and shrugs off rust without repainting. We custom-fabricate from 2 to 12 feet, with 6 feet the usual pick, in privacy, semi-privacy, and picket spacings. Gates come welded from matched aluminum and built automation-ready, so an opener can go on later, though we build the gate, not the motor.
What drives the cost of a Whittier fence?
A Whittier fence has no set price; the total tracks your specific project. The main drivers:
- material and total footage
- fence height and the number of gates
- site access and old-fence removal
- slope, grade, and any retaining-wall work
That last one is real here, where a stepped or wall-topped run takes more labor than a flat lot. A phone call gets you a ballpark; a free visit gets you the firm written number.
Warranty and the work behind it
Both materials carry real warranties. Vinyl comes with a transferable limited lifetime warranty, and we add our own 5-year workmanship warranty on the install.
On aluminum you get 20 years on the material, 10 on the coating, and 2 on the steel components, with that same workmanship warranty behind it. The track record backs the paper: 500+ five-star reviews, 2,000+ completed projects, and 100,000+ feet installed across Greater LA since 2018.
Services we offer in Whittier
Around Whittier we make privacy and picket panels, gates, pool fencing and wall toppers, and we make all of it in vinyl and in aluminum, each run cut to the measurements of your own lot.
Color, After the Material
Whittier yards go both ways and so do the swatches: one long grouped range, one short set of finishes. Mixed sections are ordinary work here, and the gate arrives in whatever tone the run beside it wears.
The Long Vinyl List
Nothing obliges one tone across a whole property. Sections can differ, and a two-tone panel pairs a body shade against a contrasting frame. Start with the family though: plain solids, smooth grains, or textured blends.
- White
- Tan
- Clay
- Gray
- Coastal Cedar
- Dark Walnut
- Dark Sequoia
- Weathered Aspen
- Mesquite
- Slate Gray
- Arctic Blend
- Brazilian Blend
- Sierra Blend
- Weathered Blend
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Aluminum in Brief
The metal side takes a minute. Flat, slatted and picket profiles carry three finishes, a grain look included. Contoured slats get one finish, matte black. Nothing custom is on offer, and heat cures each of them onto the panel.
- Black
- WoodGrain
- White
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
What the Rows Cap
Read the rows as outer limits, never as suggestions, because no two styles top out together. Where you land underneath depends on what needs hiding, how the yard sits, and what your street is allowed to carry.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Fences, Gates and Patio Covers We Build in Whittier, CA
Our Services-
-
Vinyl Gates
The full vinyl gate lineup runs on a metal frame under the cladding, from a single side gate to a wide driveway gate.
-
Vinyl Wall Toppers
A short section mounted on the wall or fence you already own, adding height without tearing out what still works.
-
Colored Vinyl Fences
Every real vinyl fence color we build, spanning solid neutral tones to layered wood-grain finishes.
-
Vinyl Patio Covers
Patio covers and pergolas get built to your yard’s footprint, skipping the sanding and staining a wood cover demands.
-
Aluminum Fences
Custom aluminum fencing built in privacy, semi-privacy, or picket styles, powder-coated against rust.
-
Aluminum Wall Toppers
Wall toppers welded from aluminum, anchored atop your existing block or masonry wall to add height.
-
Aluminum Gates
Gates welded from aluminum to match your fence, built as a walk, driveway, or rolling gate.
What Whittier-area clients say about our work
Pro Vinyl came out and assessed a job for fence toppers. David was wonderful setting up the project. The day came and Vardges did an OUTSTANDING job. His work was efficient, clean and very precisioned.
I would highly recommend the fine work delivered by this company. Everyone was friendly and extremely helpful.
Vic and David were absolutely amazing. These two guys came in and had a challenging layout to work with on a West Hollywood bungalow and powered through every landscape issues they came across.
The final result was spectacular and made my bungalow look like an estate, forever grateful!
Great service and pricing. Many more custom options than other companies. For example we wanted the fence to be 7ft in one area and 8 Ft in another area. Since they manufacture their own fencing they do. All others we contacted just do 6 ft.
I got three estimates for my property and Pro Vinyl Fencing won my bid hands down. The price was fair and the crew was professional, courteous, friendly, and even offered to help with moving some items for me. The job was completed on time and the results were excellent.
I am very happy with my new fence!
Our fence work
Fences we've built in and around Whittier
These are vinyl and aluminum fences we’ve built in and around Whittier, in the heights and styles homeowners here ask for most: full-privacy backyards, picket frontages kept within the front-yard limits, and clean modern aluminum runs. Open the gallery, then start a free quote.
Whittier: local codes, hills, and history
Whittier, from Quaker roots to the Puente Hills
Whittier grew from an 1880s Quaker settlement into a Los Angeles County charter city, named for the Quaker poet John Greenleaf Whittier and incorporated in 1898. Whittier College, where Richard Nixon studied, and the historic Uptown district anchor the town. The land climbs north and east into the Whittier and Puente Hills, home to hilly Friendly Hills.
How tall can a fence be by lot width?
How tall a front-yard fence can be depends on how wide your lot is. Interior side and rear yards allow up to 6 feet, or 8 feet next to an alley, a commercial zone, or the Greenway Trail. Chain-link is not permitted in a front or street-side yard.
| Lot width | Max front-yard height | Note |
|---|---|---|
| Up to 60 ft | 36 in | narrow |
| 61 to 99 ft | 42 in | standard |
| 100 ft or wider | 66 in | wide |
Verify your lot with the City of Whittier Planning Division.
Permits and Whittier’s front-yard fence palette
A building permit is required for a wood or vinyl fence over 18 inches, and for a retaining wall of any height. Front and street-side fences must also match a fence palette approved by the City Council, with exceptions going to the Design Review Board. Verify current requirements with the City of Whittier Planning and Community Development Department.
Fencing Whittier’s hillsides and sloped lots
On a sloped Whittier lot the fence has to follow the ground, not fight it. Vinyl panels rack, so each section steps down with the grade. Where a yard drops off, a fence can sit on top of a retaining wall, and the code allows a combined wall and fence up to 8 feet. That is the work a flat-lot installer tends to skip.
Boundary fences, pools, and HOA rules
California’s Good Neighbor Fence Act treats a boundary fence as a shared cost, split between neighbors after 30 days’ written notice. A separate state pool law requires a barrier at least 60 inches tall with no child-sized gaps and a self-latching gate, which vinyl meets. Some Whittier communities add stricter HOA rules over city code.
Population87,306
CountyLos Angeles County
ZIP Code90601-90610
Max Fence Height6 ft
Before and after
Recent projects in and around Whittier
Before-and-after pairs from vinyl and aluminum jobs in and around Whittier make the difference plain: a stepped run following a hillside grade, a corner lot with new privacy, or a low front fence kept within the city’s limits. Open the tabs, then ask for a free Whittier estimate.
Tan Vinyl Wall Topper
This Whittier property had a block wall that carried a lattice privacy barrier along its top edge. Tan vinyl privacy panels went in where the lattice had been, mounted directly onto the existing block wall rather than into the ground.
With the panels in place, the wall now carries a solid tan privacy line instead of the open pattern the lattice left. The masonry underneath still does the structural work, and the vinyl on top closes the gaps the lattice left open.
Such a great job on my fence topper! I love it! Great service and hardworking.
Project Gallery
BeforeAfter
Location
Whittier
Customer
Sarah F.
Project Type
Wall Topper
Budget
$5,000 - $7,000
Arctic Blend Vertical Picket Fence
This Whittier property had an open front yard, with nothing marking where the lawn ended and the sidewalk and driveway began. Our crew installed a vertical vinyl picket fence in Arctic Blend around the yard.
The fence stays low and traces the line of the sidewalk and driveway edge, with posts set into the landscaped soil. Even with the new fence marking the property line, the lawn and the home stay visible from the street, and the sidewalk and driveway edge now read as a clear, defined line in Arctic Blend vinyl.
Pro Vinyl Fencing did an exceptional job installing our front yard fence and rolling driveway gate! David our installer was very professional and polite and answered all of our questions. Would highly recommend this company for your vinyl fencing needs.
Project Gallery
BeforeAfter
Location
Whittier
Customer
Evelyn S.
Project Type
Picket Fence
Budget
$7,000 - $10,000
How your Whittier fence project runs
How it worksYour first call to a finished Whittier fence runs in four steps: a free on-site estimate, a written contract, the build, and your warranty in hand. We measure in person, price the real job with its slope and removal, and put it on paper first.
Every number is on the table before any work starts, with no pressure and no surprise total at the end.
Free on-site estimate
We walk your Whittier lot, measure the runs, and factor in access, grade, and any fence that has to come out first.
Written contract
Scope, materials, height, timeline, and warranty go in writing up front, so the job holds no surprises later.
Install and cleanup
We custom-fabricate each run to the height your lot allows, install it, and clear the site before we leave.
Warranty and aftercare
Your material warranty and our 5-year workmanship warranty go in writing, and we pick up the phone long after.
the learning hub
From our fence learning hub
Learn moreFencing know-how for Whittier owners: how materials and styles compare, and which local rules shape a build.
Why Brown Vinyl Fencing Beats Wood and Metal in Los Angeles
Brown vinyl in Los Angeles asks for nothing more than a rinse, skipping the repainting and rust treatment wood and metal need.
Fences blog
Whittier FAQ
Common Whittier fencing questions, answered
Here are the questions Whittier homeowners ask us most: how tall a front-yard fence can stand, when a permit kicks in, how we fence a sloped hillside lot, what the city allows out front, and what usually drives the cost. Missing yours? Send it in and we’ll get you an answer.
Still have a question?
Ask us anything about your Whittier fence, free and with no pressure.
It depends on your lot width. On a lot under 60 feet wide the front-yard limit is 36 inches; from 61 to 99 feet it is 42 inches; and 100 feet or wider allows up to 66 inches.
Side and rear yards go up to 6 feet. Verify your lot with the City of Whittier Planning Division.
Often, yes. Whittier requires a building permit for a wood or vinyl fence over 18 inches, and for a retaining wall of any height.
Because most full-height fences clear 18 inches, plan on a permit for a standard install. Confirm the details with the City of Whittier Building and Safety Division.
Yes, that is a big part of what we do here. On a grade, vinyl panels rack, so each section steps down with the slope instead of leaving gaps.
A fence can also sit on top of a retaining wall, and the city allows a combined wall and fence up to 8 feet from the lowest finished grade.
In a way, yes. Front and street-side fences have to match a fence palette approved by the City Council, and exceptions go to the Design Review Board.
Vinyl’s 14 colors across three families give you room to stay inside it. Check specifics with the City of Whittier Planning Division.
A few things move it: material, total footage, fence height, and the number of gates.
Site access, old-fence removal, and any slope or retaining-wall work matter too, common on Whittier’s hillside lots. No flat price, so you get a ballpark by phone and a firm number after a free visit.
All of Whittier, from Uptown and the historic core to East, South, and West Whittier and the hillside neighborhoods around Friendly Hills.
We also cover the nearby Gateway Cities communities. Beyond Whittier itself, the rest of Greater Los Angeles is covered too.
We'd love to hear from you
Email sales quotes@provinylfencing.com
Call LA (844) 744-0707