Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 776-0707
Living on reclaimed bay flatland behind Foster City’s levees, you get a fence engineered for salt air, flood-prone soil, and shoreline breeze.
We’ve built vinyl and aluminum fencing since 2018, backed by a lifetime warranty on vinyl and real workmanship coverage on both materials.


Foster City homeowners choose between full privacy panels near the lagoon and open picket lines closer to downtown streets.
Levee-adjacent lots, narrow waterfront setbacks, and the city’s front-yard height cap all factor into what goes in on any given block. Browse the styles below, or describe your yard on a call for a free, same-day estimate.
Foster City sits at just 6.6 feet above sea level on land reclaimed from San Francisco Bay, and the whole city falls inside a FEMA-mapped floodplain behind a system of levees. Vinyl handles that ground well: PVC does not rot, does not wick moisture the way wood does, and never needs paint to keep looking finished.
Posts are footed to the soil conditions of the lot rather than a standard depth, since reclaimed bay fill compacts differently than inland ground. The color runs through the material itself, not painted onto the surface, so a scrape from a mower or a gate hinge never flashes white, and the panel will not yellow sitting in the sun along the lagoon trails. Twice-a-year rinsing is the entire maintenance list.
Our aluminum line carries a 20-year material warranty and 10 years on the coating, but that coverage steps back for fences standing in direct saltwater or bayfront exposure, and the finish then needs a documented cleaning every 6 months to hold up.
With the Bay bordering the city and a 218-acre lagoon running through its center, most Foster City lots sit close enough to salt air that vinyl is the steadier long-term choice. Aluminum still performs well set back from the water, on interior lots away from the shoreline, where the coating faces ordinary weather rather than constant salt exposure.

Every fence style ships with a matching gate, walk-gate width up through a wide driveway opening built to hold its own weight over time. Wall toppers extend an existing block or concrete wall with added height and screening, no demolition needed, useful on interior lots away from the water.
Heights run anywhere from 2 to 8 ft and rack to follow a sloped yard, which matters on lots graded for drainage toward the levees. Waterfront rear yards under 12 ft deep follow their own rule, covered below.
A handful of things move the number: total footage, height, material picked, how many gates go in, whether metal wind inserts are added, and whether an old fence needs to come out first. Waterfront lots sometimes add site work for levee-adjacent access too. A real figure comes from seeing the yard in person. That visit costs nothing, and most questions get answered the same business day.
Throughout Foster City we install full privacy panels, semi-privacy runs, picket styles that keep a front yard open, pool-code enclosures, and matching gates sized for any driveway.
Some of this choice gets made for you. A contoured aluminum slat comes one way and one way only, while a vinyl privacy panel leaves the whole family question open. Settle the style and the material, and the palette follows.
A full privacy panel gives a color a big flat face to work with; a picket line breaks it into slim boards. Solids suit the second. The six smooth grains and the four TimberGrain textures earn their money on the first.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
A wood grain finish is the one that surprises people on metal, and it sits beside black and white on the panel styles. Contoured slats keep matte black. Charge lays the powder down, heat hardens it onto the aluminum, nothing custom.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
Two runs on the same property seldom want the same height. The table gives the range each style can be built inside. After that it comes down to the job the fence does, the ground under it, and the city ceiling for that spot.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Real installs from in and around Foster City fill the grid below: levee-adjacent privacy runs, open picket lines near the lagoon trails, and gates sized for driveways of any width. Picture the panel, gate, and color pairing on your own lot before requesting a free estimate.
Foster City incorporated on April 27, 1971, on the San Mateo County Peninsula east of San Mateo, with San Francisco Bay forming its eastern edge. The city is sometimes counted as part of Silicon Valley given its position on the Peninsula, and roughly 33,800 people call it home.
Metro Center Boulevard anchors the corporate offices near the center of town, while the rest of the city is laid out around a 218-acre man-made lagoon crossed by seven bridges.
Foster City carries 24 parks spread across more than 200 acres, plus trails that run along San Francisco Bay itself, and the lagoon is the organizing feature of the whole city rather than a single park among many. That much water close to every neighborhood means salt air reaches yards well past the shoreline, a factor worth planning for on any fence project here.
At just 6.6 feet of elevation, Foster City sits inside a FEMA-designated floodplain, and the levee system around its edge is what keeps the Bay out day to day. Ongoing water intrusion issues and the risk of higher water levels over time are part of living this close to sea level, and they factor into site work, drainage, and material choice for anything built into the ground, fences included.
Chapter 17.52 of the Municipal Code sets the local fence height limits. Front yards cap at 40 inches unless the design is at least half open and set back 20 ft from the property line, which allows up to 6 ft. Side and rear yards top out at 6 ft, or 7 ft with a foot of open wood lattice on top.
Waterfront rear yards under 12 ft deep follow a different rule: up to 6 ft across the first half of the yard, measured from the house wall nearest the water. Rules can shift by lot and zone, so confirm the specifics with Foster City Community Development before building.
Every Foster City job moves through the same four stages, whether it’s one small gate repair or a full privacy run along a levee-adjacent yard. Each stage wraps up before the next opens, so the plan never shifts once work is underway.
Every figure is set before work starts, and one crew sees the job through from first measurement to final cleanup.
Our team walks the lot with you, checks levee setbacks and lagoon-side access, and leaves a firm number.
Scope, materials, colors, and timeline go into a signed contract before the crew ever shows up.
Posts are footed for reclaimed bay soil, panels and gates go up, and the old fence is hauled away and cleaned up.
Vinyl carries transferable lifetime coverage, backed by our 5-year workmanship warranty on every Foster City install.

Guides on materials, upkeep, and planning a fence for Foster City’s floodplain and salt air conditions.
Screened pool enclosures turn bug and leaf covered water into space a family actually wants to use.
Fences blog
Fencing Questions From Foster City Homeowners
Levee-adjacent living raises questions most Bay Area homeowners never have to ask: flood-zone siting, front-yard height limits, how salt air affects aluminum, and HOA sign-off. Below is what comes up most; anything specific to your lot near the lagoon gets sorted on a call or a visit.
Still Have a Question?
Send us your levee-lot details for a free, same-day estimate.
Foster City’s fence ordinance, under Municipal Code Chapter 17.52, does not state a specific building-permit height trigger for standard fences, though front, side, rear, and waterfront height rules all apply.
Verify permit requirements with Foster City Community Development before building.
Standard front yards cap at 40 inches, though a design that is at least half open can reach 6 ft if set back 20 ft from the front property line.
Side and rear yards allow 6 ft, or 7 ft with a foot of open wood lattice on top. Verify specifics with Foster City Community Development.
Direct saltwater and bayfront exposure falls outside our aluminum warranty’s coverage, and the finish would need cleaning every 6 months to hold up.
With the Bay bordering the city and a lagoon running through its center, vinyl is the steadier long-term choice for most Foster City lots.
Rear yards under 12 ft deep that back onto the water follow their own rule: up to 6 ft is allowed across the first half of the yard, measured from the rear wall of the house nearest the water.
It’s a narrower version of the standard 6 ft rear-yard limit.
Yes, often. HOA sign-off may be required before fence work begins, and CC&Rs frequently set limits below the ordinance’s 40-inch front cap or 6-ft side and rear allowances.
Vinyl’s ten-plus colors and aluminum’s finish options usually leave room to comply.
Foster City sits at just 6.6 ft above sea level inside a FEMA-designated floodplain, and reclaimed bay fill compacts differently than inland soil.
Posts get footed to the lot’s actual ground conditions rather than a standard depth, which matters most near the lagoon and levees.