Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
Acton’s open desert lots and steady wind call for a fence that holds its line, vinyl or aluminum, built exactly to your grade and height.
We’ve installed and custom-fabricated vinyl and aluminum fencing since 2018, with a free on-site estimate and a same-day response.


Acton’s wide desert lots and open exposure need fencing that shrugs off wind and sun without constant upkeep, year after year.
From privacy runs around a homestead lot to pool enclosures and driveway gates, we match the fence to Acton’s terrain, your grade, and the county’s height rules, with a clear quote and a warranty in writing.
Acton sits in the Antelope Valley, roughly 50 miles north-northeast of Los Angeles, an unincorporated community bordered by Agua Dulce, Palmdale, Leona Valley, and Lancaster. State Route 14 carries traffic through the valley, and the Sierra Pelona Mountains and the San Gabriel Mountains frame the skyline on both sides.
Development here stays low-density and semi-rural, with wide lots and a desert-and-foothill character, a different starting point than the tighter parcels closer to the city.
That range, from tight lots near town to acreage further out, is part of what makes Acton distinct from denser cities closer to Los Angeles. We install and custom-fabricate vinyl and aluminum fencing sized to that kind of property, from long perimeter runs to a single gated entry.
Open desert country means fewer windbreaks, and a fence out here takes more wind than a sheltered suburban yard ever sees. Our vinyl line answers that with a hidden metal insert: it looks like vinyl from the yard, but there is metal inside the rails, built to take any realistic wind this area gets.
Where a lot sits on a slope near the foothills, panels are racked to follow the grade instead of stair-stepping down it, so the line reads clean from the road. Custom heights run 2 to 8 feet either way.
Vinyl carries a transferable limited lifetime warranty, and it never yellows or needs paint, just a rinse twice a year. Aluminum carries 20 years on the material, 10 on the powder coating, and 2 on steel components. Both add a 5-year workmanship warranty on the install itself, and the company has been fabricating and installing both materials since 2018.
Every quote comes down to the specifics of your property, not a flat rate. Total footage, the height you choose, vinyl or aluminum, how many gates you need, whether an old fence has to come out first, and how much slope the crew has to work around, all of it factors in.
No two Acton properties price the same way, since terrain and access vary so much across the valley. A ballpark over the phone is a fine starting point, but getting the exact figure means a free site visit, with no pressure to book.

Around Acton we build full-privacy and semi-privacy vinyl, picket and ranch-style runs, pool enclosures and matching gates, along with modern aluminum privacy, semi-privacy and picket styles for a cleaner line on the property.
A fence out here gets read from a distance long before anyone stands beside it. At fifty feet tone is all that registers, and midday sun flattens the rest. Choose for the long view, then check the swatch up close.
Nothing here is painted on, so a hard summer leaves the tone where it started and a scratch never flashes white underneath. Three families carry the range: solids number four, wood grains six, textured blends four.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Powder coat is why the metal survives out here. Heat fuses the finish to the aluminum instead of leaving it sitting on the surface. The trade is range: a grain look, white or black on flat and slatted styles, matte black on contoured.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
Exposure argues for height, though not on its own. Treat these spans as ceilings, not targets. What gets built comes from the job the run does, how open the ground around it sits, and the limit Acton sets on that line.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Acton’s high-desert lots show up across this gallery: hillside-graded privacy runs, wind-ready vinyl panels, and modern aluminum gates built for wide-open properties. Look through the finishes and colors, then start your own free quote today.
Acton is an unincorporated community in the Antelope Valley, about 50 miles north-northeast of Los Angeles, bordered by Agua Dulce, Palmdale, Leona Valley, and Lancaster. State Route 14 runs through the area, and the Sierra Pelona Mountains and San Gabriel Mountains rise on either side.
Lots here run wide and low-density, with a desert-and-foothill character that shapes how a fence gets built: longer perimeter runs, more exposed footings, and grades that need to be read before the first post goes in.
The open terrain means less shelter from wind and sun than a denser suburb offers, and it means longer property lines to cover. A fence built for Acton has to handle both without extra upkeep: vinyl that never yellows, a hidden metal insert for wind, and panels racked to the grade on sloped foothill parcels rather than left to stair-step down the hill.
Because Acton is unincorporated, fencing falls under Los Angeles County code rather than a city ordinance. Side and rear fences are allowed up to 6 feet without a permit.
Above that, county rules call for a building permit plus an engineering review, since a taller fence carries more wind and structural load. Rules can vary by parcel and zoning, so verify specifics with the Los Angeles County Department of Public Works before finalizing a height.
When a fence sits on a shared property line, California’s Good Neighbor Fence Act presumes both owners split the cost equally, and the law calls for written notice a month ahead before work starts.
Pool fencing must clear 60 inches with no gaps a child could slip through and a gate that closes and latches itself; vinyl is an approved non-climbable material for that barrier. If a homeowners association applies to your property, its rules can be stricter than the county’s, so check your CC&Rs too.
Acton fencing projects here move through four steps in order: a free on-site estimate, a written contract before work begins, a careful install built for the site and grade, and a warranty on file once the crew wraps up.
You’ll have the exact number before anything begins, with nothing tacked on later or added after the fact.
Expect a rough number over the phone first; the real one comes after we walk your Acton lot and its grade in person.
Scope, materials, height, gates, and a timeline go into a signed contract before any post goes into the ground.
The crew sets posts to your Acton grade, hangs each panel and gate, then hauls the old line away before leaving.
Vinyl’s lifetime warranty and aluminum’s 20/10/2 terms are both backed by our 5-year workmanship guarantee.

Guides on materials, height limits, and upkeep, written for Acton’s high-desert homeowners. Browse below.
Lattice’s open weave lets air move through a Los Angeles wall topper instead of blocking it completely.
Fences blog
Fencing in Acton: Your Questions Answered
A few things come up again and again for Acton properties: how tall a fence can go without a permit, when engineering review applies, what actually shapes the price, how a build handles high-desert wind, which nearby communities we reach, and where HOA rules fit in.
Still have a question?
Send a message or call, and a real person answers the same day.
Acton is unincorporated, so fencing follows Los Angeles County code, not a city ordinance.
Side and rear fences reach 6 feet without a permit; above that, the county requires a permit plus an engineering review. Verify specifics with the county’s Department of Public Works.
Not for a standard side or rear fence at or under 6 feet. Above that, Los Angeles County requires a building permit plus an engineering review, since a taller fence carries more wind and structural load.
Verify specifics with the county’s Department of Public Works.
Yes. Open, low-density terrain means less shelter than a denser suburb offers, so fences here take more wind.
Our vinyl line uses a hidden metal insert, vinyl outside and metal inside the rails, built to take any realistic wind this area gets.
Cost tracks the property, not a flat rate. Footage, height, vinyl or aluminum, gate count, old-fence removal, and site slope all move the number.
A phone estimate is a fine starting point; an exact figure comes from a free, on-site visit.
We work throughout the Antelope Valley area around Acton, including nearby Agua Dulce, Palmdale, Leona Valley, and Lancaster.
Estimates are free and same-day response is standard, so you are never waiting long to get a real answer.
Often, yes. Acton’s foothill and high-desert lots can carry more grade than a flat suburban yard, so panels are racked to follow the slope rather than stepped down it, keeping the line clean and the footings solid.
We check the grade during your free on-site estimate.