Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
Bell Gardens runs dense, with tight lot lines and close neighbors, so a vinyl or aluminum fence has to earn its privacy in a small footprint.
We fabricate to your exact lot lines and code-mapped setbacks, with a free, no-pressure estimate at your door.


Bell Gardens packs over 16,000 residents into each square mile, and density is exactly what our fence designs answer.
Vinyl privacy panels close off a small backyard completely, no gaps for a neighbor’s window to look through, and our aluminum line adds a lighter look to a front walk or gate. Both hold up without paint or rot near Gage Avenue.
Bell Gardens carries roughly 16,064 residents per square mile across the Gateway Cities region southeast of downtown Los Angeles, and almost none of that land sits empty.
Lots run close together, side yards are narrow, and a fence often does more privacy work per foot here than in a spread-out suburb. Vinyl’s tongue-and-groove privacy panels close every gap edge to edge, and custom heights from 2 to 8 ft let a design use every inch the code allows.
Bell Gardens’ grid includes plenty of corner and reversed-corner parcels along corridors like Bandini Boulevard and Foster Bridge Road, and the city’s fence code treats those street-side yards differently from a standard side yard. We map each lot against its actual frontage before fabrication starts, so a corner property doesn’t end up with a fence built to the wrong yard’s rule.
Privacy and semi-privacy vinyl panels lead the work here, fabricated to close every gap edge to edge on Bell Gardens’ narrow side yards. Picket and two-tone styles sit on the vinyl side as well, along with pool enclosures built to meet state barrier code. Our aluminum line adds driveway and single gates, wall toppers for an existing block wall, and semi-privacy panels where airflow matters more than full screening.
A phone estimate only goes so far here, especially on a corner lot with two street-facing sides; a visit gets the real number. What moves the estimate: total footage, the height chosen, how many gates and their width, whether the fence sits in a front, side or street-side yard under the code, and whether the existing fence has to come out first. A site visit turns those variables into a written figure.

Bell Gardens Municipal Code Chapter 9.32, “Fences, Walls and Hedges,” caps a front yard fence or wall at 42 inches, with an exception up to 5 ft if the wall portion stays 24 inches or less. Chain-link in a front yard tops out at 48 inches, and any solid covering on it at 42 inches. Interior side and rear fencing tops out at 6 ft, stretching to 8 ft when everything above that line is decorative wrought iron on a block wall.
Street-side yards on corner lots run 40 to 42 inches within 5 ft of the side yard line and up to 6 ft elsewhere. [NEEDS-DATA: building permit threshold for fences under Chapter 9.32]. Verify current figures and any permit requirement with the Bell Gardens Planning Division before you finalize plans.
Density decides this one. Nobody reads a run like this from across a field. It gets seen from a few feet away, over a shared line, where surface counts as much as tone. Vinyl carries surface. Aluminum answers in finish.
Colors can be mixed between sections, which helps on a lot cut into short runs: the side yard need not match the back. Four plain solids stay even, six smooth grains read like milled board, four textured blends break the tone.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Applied dry, then heat cured, the finish bonds to the aluminum instead of resting on top, which is why sun does not lift it. Flat and slatted styles take black, wood grain or white. The contoured profile is matte black only.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
Distance is what a taller run buys back where houses sit close together. Screening a window across a narrow gap asks more of a fence than marking a frontage does. The table gives the working spans; the lot and the local cap do the rest.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
These images cover vinyl and aluminum fence work completed in and around Bell Gardens and the wider Gateway Cities area, from tight backyard privacy runs to street-side corner installs. Ask for a quote, or scroll the full gallery for more angles and finishes.
Bell Gardens incorporated on August 1, 1961, and sits about 10 miles southeast of downtown Los Angeles in the Gateway Cities region of Los Angeles County. Home to roughly 39,501 residents, the city borders Bell, Cudahy, Commerce, Downey and South Gate, with main corridors including the historic Gage Avenue, Garfield Avenue, Bandini Boulevard and Foster Bridge Road running through it.
Despite its size, Bell Gardens holds eight parks and a golf course, including Veterans Park with its Hispanic American Veterans Memorial. Almost all of the city’s land area is developed, at an elevation of about 121 ft, which means lots sit close together on a tight grid rather than spread across large parcels the way a hillside or rural community would.
Density is the defining physical fact here, not slope or wind. Narrow side yards, shared property lines and corner lots with two street-facing sides all shape where a fence can sit and how tall it can run under the city’s own code. A design that works on a wide suburban parcel often needs re-mapping to fit a Bell Gardens lot correctly.
Bell Gardens Municipal Code Chapter 9.32 sets a 42-inch cap on front yard fences, 6 ft on interior side and rear yards with an 8 ft decorative wrought-iron exception, and a graduated 40 to 42 inch to 6 ft rule for street-side yards on corner lots. Permit thresholds for fences are not spelled out in that chapter, so verify current rules and any permit requirement with the Bell Gardens Planning Division before finalizing a design.
Dense lots add one extra step to the process: mapping exactly which yard rule applies to which side of the property, especially on a corner parcel, before any material ever gets cut or ordered at all for your project here.
A real person answers every call, walks the whole process with you, and never pressures you to sign early.
Someone measures the actual lot, checks which yard rule applies to each side, and leaves a written figure, not a guess.
Height, material, color, gate count and code section all go on paper first, so the number agreed is the number paid.
Posts are set to the mapped yard lines, panels close edge to edge, and gates set true before the old fence clears out.
Aluminum carries 20/10/2-year coverage; vinyl carries lifetime transfer terms, both backed by 5 years of workmanship.

Real answers on fence materials, upkeep, permits and cost factors for Gateway Cities homeowners.
Tan vinyl brings a warm, low-maintenance color to Los Angeles yards that never needs a repaint.
Fences blog
Fence Questions From Bell Gardens Homeowners
Corner lots, tight side yards and Bell Gardens’ own fence code come up more than anything else when a homeowner calls us. These are the answers we give before a crew ever sets a single post on a dense city lot, so nothing about the project catches anyone off guard.
Got another question?
Reach out and someone from our team gets back to you the same business day.
Bell Gardens Municipal Code caps a front yard fence or wall at 42 inches, with an exception up to 5 ft if the wall portion stays at 24 inches or less.
Chain-link in a front yard can reach 48 inches. Verify current limits with the Bell Gardens Planning Division.
Street-side yards on corner or reversed-corner lots run 40 to 42 inches within 5 ft of the side yard line, and up to 6 ft elsewhere, with a decorative wrought-iron exception.
We map your actual frontage before fabrication to apply the right rule to each side.
Under Bell Gardens Municipal Code Chapter 9.32, interior side and rear fencing tops out at 6 ft, stretching to 8 ft when everything above that line is decorative wrought iron on a block wall or wrought-iron fence.
Chapter 9.32 sets height limits but does not spell out a permit threshold for fences. [NEEDS-DATA] Verify current permit requirements directly with the Bell Gardens Planning Division before you finalize plans.
Yes. Tongue-and-groove panels close edge to edge with no gaps, which matters most on the narrow side yards common on Bell Gardens’ dense lots, and custom heights from 2 to 8 ft use the code’s full allowance.
State pool-safety code requires a barrier standing 60 inches or taller, a maximum 2-inch gap beneath it, no opening wider than 4 inches anywhere in the fence, and a self-latching gate that swings outward, away from the water.
Vinyl is recognized as an approved non-climbable barrier.