Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
Beverly Hills requires a permit for any front yard fence, tall or short, so the design has to be right before anything gets fabricated.
We fabricate vinyl and aluminum fencing to order, with a free, no-pressure estimate and a written scope before a post is set.


Beverly Hills fencing answers to a strict zoning code first, and our job is fitting a design that clears it without losing style.
Vinyl privacy panels never yellow and need nothing more than a rinse twice a year, in colors that read as polished as painted wood without the upkeep. Aluminum adds a modern, powder-coated edge to gates and entries.
Beverly Hills fencing falls under Municipal Code Title 10-3, and its front yard rule is stricter than most cities nearby: any fence in a front yard needs a permit regardless of its height, and the yard itself caps at 3 ft.
Side and rear yard fencing can run taller, but the front yard rule alone means a design has to be settled and correct against code before fabrication starts, not adjusted after the fact once material has already been ordered and cut to size.
Beverly Hills incorporated over a century ago, and the properties along its residential streets tend to expect a finished, architectural look from a fence, not a utility line.
Vinyl panels hold their color without painting, in styles from tongue-and-groove privacy to two-tone picket, and our aluminum line in black, white or wood-grain powder coat gives gates and entries a cleaner edge for a homeowner who wants metal instead of PVC on a Wilshire-adjacent property.
We build and fabricate privacy and semi-privacy vinyl panels, picket and two-tone styles, and pool enclosures meeting state barrier code. Our aluminum line covers privacy and semi-privacy panels, driveway and single gates, and wall toppers, which add height to an existing wall without tearing it down.
Phone numbers only go so far here, especially with a front yard permit in play; the real figure comes from an actual on-site visit to the property in question. What moves the estimate: total footage, the height chosen within the allowed range for that yard, how many gates and their width, whether the fence sits in a front, side or rear yard under the code, and whether an existing fence has to come out beforehand.

Beverly Hills Municipal Code sets a 3 ft maximum for front yards, 7 ft for side yards (8 ft within 5 ft of the rear lot line), and 8 ft for rear yards. A permit applies to any fence over 6 ft, and separately, to any fence in a front yard no matter how short it is.
These figures come from Title 10-3, sections including 10-3-2616, 10-3-2503, 10-3-2814, 10-3-2420 and 10-3-2516, and can vary by zone within the city. Verify current limits and permit requirements with the Beverly Hills Department of Planning and Community Development before finalizing any fence design for your property.
Height answers to the code. Color answers to the house. That part is left entirely to you: a tone agreeing with stucco, brick or a planted border, held in the material rather than laid on it. Vinyl is the longer list.
Pair a body color with the frame in a second tone and one run does two things at once. That is what the three families are for: four plain solids, six smooth grains with a milled face, four textured blends that stay lively.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
The metal list is short and does not pretend otherwise. Three colors serve most of the line: white, black, wood grain. Nothing custom joins them. Contoured slats sit outside that and wear matte black, the only finish they carry.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
Zoning caps the number and style shapes it, and the table speaks only to the second: every design works inside a range. Purpose settles the rest. A barrier around water asks a different figure than a line at the sidewalk.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
This set shows finished vinyl and aluminum installs from in and around Beverly Hills and nearby West Los Angeles neighborhoods, from front entry gates to full privacy runs. Request your own quote, or flip through the full gallery for more finishes.
Beverly Hills incorporated on January 28, 1914, and sits about 15 miles west of downtown Los Angeles in Los Angeles County, with roughly 30,863 residents. Unlike many neighboring communities, the city has no internal neighborhoods of its own; it borders West Hollywood to the east, Los Angeles’ Bel Air to the north, Westwood to the west, and Beverlywood to the south.
The city’s identity runs through a handful of named corridors: Wilshire Boulevard and Sunset Boulevard cross it end to end, and Rodeo Drive anchors its commercial core. Residential streets sit close to these corridors, and parks like Pickfair Park and Beverly Canon Gardens give the city green space without the open canyon or hillside terrain found elsewhere in Los Angeles County.
Beverly Hills doesn’t carry the wind corridors, slopes or coastal exposure that shape fencing elsewhere in the region; what shapes a fence design here is the zoning code itself. A strict front yard rule and permit requirement mean the deciding factor on most projects is code compliance and finish quality, not grade or weather.
City code caps front yards at 3 ft, side yards at 7 ft (8 ft within 5 ft of the rear lot line), and rear yards at 8 ft. Any fence over 6 ft needs a permit, and so does any front yard fence regardless of height. Rules can vary by zone and by section of Title 10-3, so verify current limits with the Beverly Hills Department of Planning and Community Development before finalizing a design.
A front yard permit changes the order of operations here: design gets settled and checked against city code before fabrication starts, not after, so nothing has to be redone once a crew actually shows up on site to build.
Someone real answers when you call, explains each step plainly, and never pushes you to sign before you’re ready.
Someone walks the property, checks which code section applies to each yard, and leaves a written figure, not a guess.
Height, material, color, gate count and code section go on paper before signing, so what’s built matches what’s agreed.
Posts are set to the confirmed lines, panels close edge to edge, and gates hang true before the old fence leaves.
Your paperwork lists vinyl’s lifetime transfer terms or aluminum’s 20/10/2-year coverage, plus 5 years of workmanship.

Honest guides on fence materials, upkeep, permits and cost factors for Beverly Hills homeowners.
A vinyl pool fence in Los Angeles pairs code-ready safety with a low-upkeep, good-looking barrier.
Fences blog
Fence Questions From Beverly Hills Homeowners
Front yard permits and code sections come up more than anything else when a Beverly Hills homeowner calls us. These are the answers we give before a crew ever sets a single post on a front, side or rear yard, so nothing about the project catches anyone off guard.
Have a question for us?
Message our team or pick up the phone, and someone answers you directly.
Yes. Beverly Hills requires a permit for any fence in a front yard, regardless of its height, and caps front yard fences at 3 ft.
Verify current requirements with the Beverly Hills Department of Planning and Community Development before finalizing a design.
Side yards cap at 7 ft, or 8 ft within 5 ft of the rear lot line, and rear yards cap at 8 ft under city code. A permit applies once any fence passes 6 ft, separate from the front yard permit rule.
Fencing falls under Municipal Code Title 10-3, with height and setback rules spread across sections including 10-3-2616, 10-3-2503, 10-3-2814, 10-3-2420 and 10-3-2516, which can vary by zone.
If your property sits under an association’s CC&Rs, those rules can be stricter than city code and apply on top of it. Check your CC&Rs alongside Title 10-3 before finalizing colors, styles or heights.
Yes. Vinyl’s color is part of the PVC itself, not a surface coat, so a scrape never flashes white underneath. Styles range from tongue-and-groove privacy to two-tone picket, built for a finished, architectural look.
Under California’s pool barrier code, the fence must reach 60 inches, sit no more than 2 inches off the ground, avoid any 4-inch gap, and use a gate that closes and latches by itself, opening away from the water.
Vinyl meets the non-climbable standard.