Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
Norwalk’s flat suburban lots take a straight, level fence line easily, and we size every panel and post run to your exact yard, not a stock length.
Send a photo of your yard or call the office, and you’ll hear back from a real person the same business day, no automated runaround.


Norwalk homeowners get vinyl privacy and aluminum modern fencing built to fit standard suburban lot lines, gate to gate.
Norwalk runs mostly flat and suburban, block after block of standard lot lines, so pricing comes down to footage, height and gate count more than terrain. We still walk every yard before quoting, because a tape measure beats a guess.
Norwalk is flat, suburban and built on regular residential lot lines, the kind of level ground that makes a fence line straightforward to set true from the first post to the very last one. That doesn’t mean every yard is identical: corner lots, alley-facing rear yards and older subdivisions near Downey and Whittier all call for a slightly different fence layout, which is why we walk the property before we plan the run.
Vinyl doesn’t rot, doesn’t need paint, and its color runs through the material so a scrape never shows white underneath, just a rinse twice a year to keep it clean. Aluminum gives a more modern architectural line, finished in powder-coated black, white or a wood-grain tone, and both materials come in custom heights from 2 to 8 ft, racked dead level across a typically flat suburban Norwalk lot.

Standard Norwalk lot lines often sit close to a neighbor’s, and our privacy vinyl uses tongue-and-groove construction with no gaps between boards, which cuts down on both the sightline and the noise crossing a property line. Two-tone panels let you pair a darker post and rail with a lighter infill, a detail that reads well against typical stucco and brick suburban facades in Norwalk without looking like a plain flat wall.
Across Norwalk’s suburban blocks we install privacy and semi-privacy vinyl, picket and two-tone styles, pool enclosures that meet state code, aluminum privacy and semi-privacy panels, and matching walk, driveway or rolling gates for the wider openings.
Every fence ships with a gate built to match: a walk gate for a side yard, a wide driveway gate with extra internal framing so it holds true over years of daily use, or a rolling gate where a swing gate won’t clear the space.
We don’t quote by guesswork. What actually moves the number: total footage, fence height, material choice, number of gates, whether the old fence has to come out first, and any small amount of grading a corner lot happens to need.
A free, no-obligation on-site visit gets you a real figure instead of a phone estimate. Mention any old wood or chain-link fencing that needs removal up front and we’ll fold that into the same quote, rather than surprise you with it after the crew is already on site and the old fence is half torn out.
Where houses repeat down a block, the fence is the part you get to decide. Same footprint as next door, a different tone, and the boundary reads as yours. That tone is locked in at the shop, never applied later.
Fourteen sounds like a lot until they sort into three. Solids are the flattest of the set, four in number. Six smooth grains take a milled surface. The four textured blends run deepest, Weathered Blend among them.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Honesty first: this is the shorter of the two palettes. On panel and picket styles it runs white, black or wood grain, with matte black reserved for a contoured slat. Powder, not paint, and heat locks it down.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
How much cover you actually need comes first, and it is rarely the maximum. Style answers next, since a solid panel and an open rail stop in different places. The yard and the local cap close it out, then we cut to measurement.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Here’s a sample of vinyl and aluminum jobs completed around Norwalk and nearby southeast LA County suburbs, from full privacy runs on standard lots to modern aluminum panels on newer builds. Scroll through or open the full gallery for more, right here.
Norwalk incorporated in 1957 and has grown into one of southeast Los Angeles County’s larger suburbs, home to roughly 102,773 residents as of the 2020 census. It sits about 17 miles southeast of downtown LA, bordered by Downey, Santa Fe Springs and Whittier to the north and east, and Bellflower, Cerritos and Artesia to the south.
Norwalk sits inland, flat and suburban, without the coastal salt air or hillside grading that complicate installs elsewhere in our service area. Regular lot lines and level ground mean most fence runs go in clean and fast, post to post, without the racking a sloped yard requires.
Side and rear fencing in Norwalk can run up to 6 feet without a permit; go above that and the work needs a permit and plan review. Front-yard limits and the exact municipal code section were not confirmed in public sources at the time of writing, so treat the front setback as an open question rather than a fixed number.
Always verify current limits and any permit requirement directly with the Norwalk Community Development Department before you build, especially if your project sits close to the front property line.
If your yard has a pool, California’s pool safety act sets the floor regardless of city ordinance: a barrier height of at least 60 inches, ground clearance capped at 2 inches, no opening wider than 4 inches, plus a self-closing, self-latching gate that swings away from the water. Vinyl qualifies as an approved non-climbable barrier material.
A Norwalk install breaks into four stages, the same order for a small side-yard repair or a full perimeter job: an on-site estimate, a written contract, the actual build, and warranty paperwork handed over once the last gate swings true.
Call, message or fill out the form, and a real person walks you through what happens next, start to finish.
A team member drives out, measures the yard and gate spans, and gives you a real number on the spot.
Scope, material, height, gate count and timeline go in writing before we schedule the crew, no surprises later.
Posts go in plumb and true, panels and gates follow, and the old fence gets hauled away same day.
Aluminum’s 20/10/2 year warranty and vinyl’s lifetime coverage both land with our 5 year workmanship.

Straightforward reads on materials, maintenance and permits for Norwalk homeowners planning a fence.
Arched picket fencing gives a Los Angeles yard a classic look that still works as a pool and pet barrier.
Fences blog
Fence Installation Questions for Norwalk
Norwalk homeowners ask a lot of the same things before they commit: what the city allows without a permit, how HOA rules stack on top of it, and how fast a standard suburban lot gets scheduled. Here are straight answers, not sales talk. We keep it plain.
Got another question?
Message us or call, and we'll get back to you the same business day.
Fences up to 6 feet in Norwalk generally don’t need a permit; go taller and the work needs plan review first.
Front-yard limits specifically weren’t published in city sources we could confirm, so verify current rules with the Norwalk Community Development Department before you plan a height.
Fences up to 6 feet built from wood, chain link, tubular steel or masonry are generally exempt from a permit in Norwalk.
Anything taller, or a different material, likely needs plan review. Confirm your specific case with the Community Development Department first.
Yes. Along with Norwalk we cover the surrounding southeast LA County suburbs, including Downey, Bellflower, Cerritos, Artesia, Santa Fe Springs and Whittier.
One call covers your whole block or your extended family’s yards too.
Under California’s Good Neighbor Fence Act, neighbors sharing a property line are presumed to split a new fence’s cost evenly, and whoever wants the work done gives the other side 30 days’ written notice first.
Neighbors can still agree to something different.
Yes, statewide, regardless of what Norwalk’s own ordinance says: the barrier must stand at least 60 inches high, keep ground clearance under 2 inches, avoid any 4 inch gap, and use a self-closing, self-latching gate.
Vinyl is an approved non-climbable material.
Most Norwalk jobs go from signed contract to finished install within a couple weeks, since flat lots and standard lines mean little unexpected grading work.
Exact timing depends on materials on hand and the size of the job, confirmed at your estimate.