Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Vinyl and Aluminum Fencing Built for Palmdale
Fence Contractor in PalmdaleGet a fence sized to your Palmdale yard, built to stand up to high-desert wind, dust, and sun, and matched to the city’s own fence code from day one.
Tell us about the property and get a fast, honest estimate from a 5.0-rated crew that installs and custom-builds both materials.
- 5-Star Reviews
- 350+
- Warranty
- Lifetime
- Projects Completed
- 1000+
Get your free estimate today
What good fencing looks like in Palmdale
Across Palmdale we install and custom-build vinyl and modern aluminum fencing, matched to the high desert and the city’s fence code.
Most Palmdale yards raise the same three questions: what survives desert wind and sun, what the city’s fence rules allow, and what a fair price looks like. A licensed installer and custom fabricator since 2018, we answer them before you sign.
Vinyl or aluminum for your Palmdale yard?
Start with where the fence goes, because Palmdale’s code treats a lot’s front differently from its sides and back. A front or street setback wants an open, see-through line, where modern aluminum fits: powder-coated and rust-free, 2 to 12 feet.
For privacy on the sides and rear, solid vinyl is the usual call, in 14 colors, three families, and 16 styles, its color running through the panel so it never yellows. The code even names durable vinyl as approved. Vinyl carries a transferable limited lifetime warranty; aluminum a 20-year material, 10-year coating, and 2-year steel-component warranty, plus our own 5-year workmanship warranty.
What actually drives a Palmdale fence’s price?
Pricing in Palmdale is set by your property, not read off a chart. Linear footage sets the baseline, then height, gate count, old-fence removal, and site prep move it. Desert ground counts too, since rocky or hardpan soil changes how posts get set.
Height is a code question before a budget one: a 4-foot open front fence and a 6-foot privacy run do different jobs, so choose by what the yard needs. We give a ballpark over the phone, but a real number takes a visit.
Which fence stands up to high-desert wind and sun?
At around 2,600 feet, Palmdale gets hard sun, big temperature swings, and the dry, gusty wind and blowing dust this high desert is known for. Vinyl shrugs off the sun: its color runs through the material and never yellows.
Wind is the real test. In windy spots we build with metal inserts: it looks like vinyl outside, but there is metal inside, and it takes any realistic wind this area gets. Aluminum does the same, with steel-reinforced posts on exposed runs.
Custom heights, gates, and the jobs others turn down
Palmdale lots run large, and standard panels don’t fit every one. We fabricate vinyl from 2 to 8 feet and aluminum from 2 to 12, so a 7-foot run or a low 2-foot topper on a block wall is routine, not a special order. Side and rear fences can pass 6 feet when the part above 6 is open-view, handy on a big desert lot.
Small jobs are welcome too, the kind some crews call not worth the trip. On gates we build the whole construction, from garden swings to driveway and rolling gates, automation-ready for your opener, though we do not supply the motor. One local rule: a front-setback driveway gate must roll open or swing inward, off the public right-of-way.
Services we offer in Palmdale
In Palmdale we build the full range, from solid privacy to open picket lines, with matching gates on every style. Vinyl and modern aluminum both come in the heights, colors, and styles that suit your yard.
Palmdale Color Choices
Desert sun flattens a tone, so a color that looks soft on a sample can read paler across a long Palmdale run. Check a swatch outdoors before you commit. Vinyl brings the wide range here. Aluminum stops at a handful.
The Vinyl Range
Work backwards from the deepest end and the sorting gets easy. Four textured blends hold the most surface. Six wood grains take a milled timber look. Four plain solids, tan and gray among them, keep the calm end.
- White
- Tan
- Clay
- Gray
- Coastal Cedar
- Dark Walnut
- Dark Sequoia
- Weathered Aspen
- Mesquite
- Slate Gray
- Arctic Blend
- Brazilian Blend
- Sierra Blend
- Weathered Blend
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Powder Coated Aluminum
Against open desert ground a black finish draws a hard line and white steps back. Those two plus a wood grain cover the slat and panel styles. Matte black alone covers the contoured slat profile, powder coat like the rest.
- Black
- WoodGrain
- White
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
What Sets the Height
A tall run is not automatically the right run out here. Each style works inside its own span, the code caps the top, and what you are shielding sets how much of that span you actually use.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Fences, Gates and Patio Covers We Build in Palmdale, CA
Our Services-
-
Vinyl Gates
The full vinyl gate lineup runs on a metal frame under the cladding, from a single side gate to a wide driveway gate.
-
Vinyl Wall Toppers
A short section mounted on the wall or fence you already own, adding height without tearing out what still works.
-
Colored Vinyl Fences
Every real vinyl fence color we build, spanning solid neutral tones to layered wood-grain finishes.
-
Vinyl Patio Covers
Patio covers and pergolas get built to your yard’s footprint, skipping the sanding and staining a wood cover demands.
-
Aluminum Fences
Custom aluminum fencing built in privacy, semi-privacy, or picket styles, powder-coated against rust.
-
Aluminum Wall Toppers
Wall toppers welded from aluminum, anchored atop your existing block or masonry wall to add height.
-
Aluminum Gates
Gates welded from aluminum to match your fence, built as a walk, driveway, or rolling gate.
What Greater LA property owners say about our fence work
Michael is the G.O.A.T. when it comes to fencing. Pro Vinyl Fencing was not only one of the cheapest but also best quality material used. DO NOT GO WITH A SUB CONTRACTOR, they use overseas material that will warp andor turn color after a few years.
Pro Vinyl removed the old and installed the new fence in one day. Highly recommend these guys.
Great service and price, this was a 3 neighbor project, Pro vinyl worked with us, all of us are very happy we chose Pro Vinyl over the 4 other companies. Smooth and no issues from start to finish. They also installed a wall topper for my backyard.
Next job, vinyl fencing around the pool for mom’s house.
Highly recommend. Nairi was very professional and prompt with my estimate and measurements. The two installers did a great job and made sure all was precise and cleaned up job area when finished.
Thank you guys. I have already requested my next job estimate.
Great job by Pro Vinyl Fencing! Nairi came out and measured and designed the fence, worked with my wife to pick the material, gave us a great deal, and his team of engineers and installers nailed the demo and install! No fuss and no muss. Two full days of no nonsense work and it looks beautiful! Work done in Chino!
Project gallery
Vinyl and aluminum work near Palmdale
Have a look at vinyl and modern aluminum fences we’ve built in and around the Antelope Valley: privacy runs, picket lines, matching gates, and wall toppers in a range of colors and heights. The photos show the finish, the post work, and how a clean line looks against a real desert yard.
Fence installation in Palmdale, CA
From a valley of palms to a high-desert city
Palmdale began as Palmenthal in 1886, when Midwest settlers mistook the local Joshua trees for palms and named their home the valley of palms. Shortened over time, that became Palmdale. It was a small farming town for decades, then became one of the country’s fastest-growing cities in the 1990s as families priced out of Los Angeles found room here. Most of the roughly 170,000 people here live in single-family homes built since 1980.
The Aerospace Capital at 2,600 feet
Palmdale calls itself the Aerospace Capital of America, and it earns the name. Air Force Plant 42 has built and tested aircraft here since the 1950s, with Lockheed Martin, Northrop Grumman, and Boeing among the employers that shaped the city. Around them sits a working city, anchored by the Antelope Valley Mall, across the Mojave high desert at about 2,600 feet.
Whose fence rules apply in Palmdale?
Palmdale is a charter city with its own municipal code, so fence rules come from the City of Palmdale, not Los Angeles city or county. Height depends on placement. Along a front or street setback, a solid fence tops out at 3 feet, with open-view allowed higher: 5 feet on standard lots, 6 feet on lots of 20,000 square feet or more. Side and rear fences run to 6 feet, or 7 if the part above 6 is open-view.
Any fence over 6 feet needs a building permit. The code favors durable materials like vinyl, masonry, or wrought iron over natural wood and residential chain-link. Verify the specifics with the City of Palmdale Planning Division. State law adds the Good Neighbor Fence Act for shared lines and a 60-inch pool-fence barrier with self-latching gates.
What does the high desert do to a fence?
The high desert is hard on a fence. Summer heat and UV punish cheaper materials, cold nights work the joints, and wind drives dust at whatever stands in it. Palmdale’s code even accounts for wind-blown dust off open ground. A fence here has to last years without warping, so we lean on vinyl that holds its color and metal-reinforced builds where wind is worst.
Population169,450
CountyLos Angeles County
ZIP Code93550-93599
Max Fence Height6 ft + 1 ft
Recent work
Installations around the Antelope Valley
Every project on this tab is a real fence we designed, built, and stood behind. Across Greater Los Angeles we’ve finished more than 2,000 of them and installed over 100,000 feet of fencing since 2018. The sets show how a plan on paper becomes a finished line. Slide through to see the work up close.
White Privacy Fence, Palmdale
This Palmdale property had an aging wood fence along the rear and side yards, and that fence came out to make way for the new install. In its place went a white vinyl privacy fence running the same rear and side boundary.
The yard here is not flat, so the fence line was built to follow the changing grade rather than step down in fixed sections. With the old wood fence gone, the rear and side yards now share one continuous white vinyl privacy line that tracks the slope of the property instead of fighting it.
Nairi and his team were excellent! The service was professional, quick and very well done. Thank you Pro Vinyl Fencing.
Project Gallery
BeforeAfter
Location
Palmdale
Customer
Daniela L.
Project Type
Privacy Fence
Budget
$1,000 - $3,000
White Vinyl Double Gate
This Palmdale driveway was closed off by a black metal double gate, set into the opening between two block walls. Our crew removed the metal gate and installed a white vinyl double privacy gate in the same opening.
The new gate is anchored directly into the concrete driveway, fitting the space that was already framed by the block walls on either side. In place of the metal gate, the entrance now has a vinyl privacy gate that closes off the driveway more fully than before, giving the property a more private edge at that opening.
David installer was great. Thankful we got him to do our project
Project Gallery
BeforeAfter
Location
Palmdale
Customer
Rich
Project Type
Double Gate
Budget
$1,000 - $3,000
From estimate to finished Palmdale fence
How it worksGetting a fence built in Palmdale is a short, clear path. It starts with a free on-site visit: we measure, check access, grade, and desert ground, then size up the job. From there we build to your heights and colors and set posts to last.
Four steps, no guesswork, no pressure to decide before you are ready. Here is how each one goes.
Free on-site estimate
We come out, measure, and factor in removal, ground works, and access, then hand you an honest number, not a guess.
Design and materials
You pick material, height, and color; we match it to your yard and Palmdale’s fence code so nothing gets flagged later.
Fabrication and install
Crews custom-build your panels and gates, add metal inserts where wind calls for it, and install clean, most in a day.
Walkthrough and warranty
We walk the finished line with you, clean up the site, and back the work with our own 5-year workmanship warranty.
the learning hub
Fencing guides and how-tos
Learning hubPlanning a fence or weighing your options? Read our guides on materials, cost factors, and upkeep.
Vinyl Wall Toppers for Extra Privacy on a Los Angeles Fence
A vinyl wall topper adds height and privacy to an existing Los Angeles wall without a full rebuild.
Fences blog
Palmdale FAQ
Fence questions Palmdale homeowners ask us
Straight answers to what Palmdale property owners ask most, from the city’s height rules and permits to how vinyl and aluminum hold up in the high desert. If your question isn’t here, ask us directly for a real answer. Every fence is a little different, so treat these as a starting point.
Got a different question?
Call or send a message and get a straight answer, no sales pressure.
In a front or street setback, a solid fence can reach 3 feet. For more height there, it must be open-view: up to 5 feet on a standard lot, or 6 feet on lots of 20,000 square feet or more.
This keeps sight lines open near the street. Confirm your setback with the City of Palmdale Planning Division.
Yes. Any fence or wall over 6 feet needs a building permit, in every zone. Under 6 feet, no building permit is required, though the height and material rules still apply.
Zoning and materials go through the Planning Division, structural permits through Building and Safety. Verify with the city.
Palmdale’s code calls for durable materials and does not allow natural wood or residential chain-link. It names durable vinyl, masonry, and wrought iron as approved.
Wood makes a fine fence; the city favors what lasts in the desert. Vinyl and modern aluminum both meet it, in styles as warm as wood.
Both do, when they are built for it. Our wind answer is the metal insert: a vinyl-faced panel with a metal spine hidden inside, rated for the gusts this high desert really delivers.
On taller or exposed runs, aluminum posts add steel reinforcement. Blowing dust rinses off either one with a hose.
No. Vinyl never yellows in the sun, because the color runs all the way through the panel rather than sitting on top like paint.
At Palmdale’s 2,600-foot elevation the UV is strong, so it matters more here than most places. It holds its color for years; a rinse twice a year is the whole plan.
Yes, and big lots are our best work. We fabricate vinyl from 2 to 8 feet and aluminum from 2 to 12, so long runs, mixed heights, and open-view above 6 feet work.
Full gates come too, from side to driveway and rolling, automation-ready for your opener, though the motor comes from your installer.
We'd love to hear from you
Email sales quotes@provinylfencing.com
Call LA (844) 744-0707