Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
San Gabriel foothill lots run hot, rocky and sloped toward the canyons, and your fence line needs footings and materials that account for all three.
PVAF’s crew has worked San Gabriel yards since 2018, fabricating vinyl and aluminum in-house, backed by a 5-year workmanship warranty.


San Dimas homeowners near Foothill Boulevard and West San Dimas call us for vinyl privacy fencing that resists heat and UV fade.
Rocky, uneven foothill soil often means deeper footings before a single panel goes up, and slopes toward the canyons call for a racked, stepped fence line built to the actual grade. We plan for both on the first visit, every time.
Ask what we build in San Dimas and the list starts with vinyl privacy, semi-privacy and picket fencing, then ranch-style rail for wider foothill parcels, and aluminum privacy and semi-privacy fencing for a lower-maintenance modern look. Wall toppers extend an existing block wall’s height without demolition, and every style ships with a matching walk or driveway gate, built with extra framing to stay square on rocky, uneven ground.
San Dimas sits at the base of the San Gabriel Mountains, and a lot of yards here slope toward the canyons or sit over rock close to the surface. That changes the install before it starts: footings often need to go deeper, and in the rockiest spots posts call for drilling rather than a simple dig.
Fence lines get racked and stepped to the grade so the top edge reads level even where the ground clearly isn’t, and interior side lines running toward a canyon edge get the same treatment as a front-facing run.

Intense inland heat and strong UV exposure are routine here, and it’s part of why vinyl is a strong fit: the pigment is mixed into the panel itself instead of sprayed on afterward, so a scrape never exposes a different shade underneath, and nothing here ever needs repainting.
Because San Dimas is a wildfire-prone foothill area, fencing within 5 feet of a structure should be non-combustible or fire-retardant, a detail worth confirming locally before materials are chosen for a fence line close to the house. Aluminum’s ASTM Class A flame and smoke rating is a natural fit near structures.
A phone call gets you a ballpark, but a real number takes a look at the actual lot. What moves the estimate here specifically: total footage, height, material choice, gate count, how much rock the footings have to get through, whether the line runs along a slope, and whether an old fence needs to come out first. A free, no-obligation on-site visit covers all of it in one trip, with no pressure to sign anything on the spot.
From West San Dimas to lots along Foothill Boulevard, Route 66 and Arrow Highway, we install and fabricate fencing throughout San Dimas and the surrounding San Gabriel Valley, including La Verne, Glendora, Covina and Walnut. Small repairs, single-gate replacements and odd-shaped foothill yards get the same crew, the same materials and the same warranty as a full property enclosure.
Nothing gets repainted out here, which puts all the weight on the first choice. Judge a tone against the house and against dry foothill ground, in daylight, rather than against a sample held indoors under a lamp.
UV is the question most people ask first. Color goes right through a vinyl board, so a run of hot summers will not bleach it out. Groups matter more than shades: plain solids at one end, milled grains, then the blends.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Where vinyl gives you groups, metal gives you a handful. Flat profiles and pickets offer wood grain, black and white. Contoured slats stay matte black. The finish is powder, bonded under heat, and it holds through a foothill summer.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
Room on a foothill parcel argues for one number, a back yard tight against a neighbor argues for another. Style fixes the top of each range, then the ground and the code settle the rest. Pick per run, never per property.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Browse completed vinyl and aluminum installations in and around San Dimas, from foothill privacy runs near the San Gabriel Mountains to picket lines closer to Foothill Boulevard and Arrow Highway. Every image is a real finished job, not a rendering.
San Dimas incorporated on August 4, 1960 and sits in the eastern San Gabriel Valley, roughly 28 to 30 miles east-northeast of downtown Los Angeles, at the foothills of the San Gabriel Mountains. Population runs about 34,924 as of the 2020 census, with a 2024 estimate near 33,226. Route 66 still runs through town along Foothill Boulevard, with Arrow Highway and San Dimas Avenue forming the other main corridors.
The West San Dimas enclave sits in the southwestern part of the city, and lot patterns shift from flatter valley-floor parcels to sloped foothill ground as you move north toward the mountains. La Verne and Pomona border the city to the east, Walnut sits to the south, and Glendora and Covina lie to the west, all part of the same eastern San Gabriel Valley corridor.
The San Gabriel Mountains bring dry heat, occasional strong winds and yards that often slope toward canyon terrain or sit over rock close to the surface. That combination calls for deeper footings, sometimes rock drilling, and fence lines racked to follow the actual grade rather than built flat. There’s no coastal salt exposure this far inland, which keeps both vinyl and aluminum performing well without added upkeep for salt air.
San Dimas’s Development Standards cap fences and walls inside the front setback area at 42 inches, with the corner sight-triangle rule built into that same setback provision.
Outside the setback, decorative walls and fences can reach up to 6 feet with development plan review, and any fence over 6 feet needs a building permit. Rules and thresholds can change; verify current specifics with San Dimas Planning or the Building and Safety Division before finalizing plans.
A foothill install needs a real look at the ground before anything else, since rock beneath the surface and canyon-facing slopes both change how deep the posts have to go and how the panels rack against the actual grade.
Materials, height, gate count, fire clearance and timeline are set in writing before crews break ground.
Someone walks the lot, checks for rock beneath the surface, and gives you a real number instead of a phone estimate.
Height, material, color, gate count and fire-clearance spacing near structures go on paper before the crew arrives.
Footings go in deep enough for rocky soil, panels rack to the slope, and the crew hauls away whatever fence came down.
Aluminum carries 20-year material terms, vinyl a transferable lifetime warranty, both backed by our 5-year workmanship.

Practical answers on heat, slope, wildfire clearance and material choice for San Gabriel Valley yards.
Once a patio furniture cover comes off, the cushions and frame underneath are already clean and ready to sit on.
Fences blog
San Dimas Fence Questions Homeowners Ask
Straight talk on what changes at a San Gabriel foothill address: height limits inside the Foothill Boulevard setback, wildfire clearance rules near structures, permit thresholds, and why rocky, canyon-facing ground can add a step, and a cost, to installation.
Got another question?
Call or drop a message, and someone real gets back to you the same day.
San Dimas’s Development Standards cap any wall or fence inside the required front setback area at 42 inches.
Outside the setback, side and rear fences can reach up to 6 feet with development plan review and director approval. Verify current specifics with San Dimas Planning before finalizing height.
The San Gabriel Mountains rise directly north, putting San Dimas in a wildfire-prone foothill zone. Fencing within 5 feet of a structure should use non-combustible or fire-retardant material.
Vinyl and aluminum qualify; verify defensible-space rules with the local Fire or Building Department.
Foothill lots around San Dimas often have harder, rockier soil close to the surface, which can call for deeper footings or rock drilling to set posts securely.
It’s one of the factors we check on a free on-site visit before quoting height, material and gate count together.
In San Dimas, any fence taller than 6 feet requires a building permit. Fences at or under that height, kept outside the required front setback, generally don’t.
Verify current thresholds with San Dimas Planning or Building and Safety before ordering materials.
West San Dimas, Foothill Boulevard and Arrow Highway are all regular service ground for us, along with the neighboring cities of La Verne, Glendora and Covina.
Many San Dimas lots slope toward canyon terrain at the base of the San Gabriel Mountains.
Panels get racked or stepped to follow that grade, and posts are set to the measured slope on-site rather than assumed flat, so the fence line finishes level along the top.