A Fence Built for Signal Hill's Coastal Winds

Fencing for a Hilltop Enclave

Signal Hill sits on high ground completely surrounded by Long Beach, a compact city built over what was once one of the busiest oil fields in Southern California.

That oil-town history left graded lots and buried infrastructure across many properties, and the elevation means wind and coastal salt air reach yards here more directly than in the flatter neighborhoods around it. Fencing built for this hill has to account for both from the very start of a design.

(5.0)

Based on 386 reviews

(4.7)

Based on 141 reviews

Services We Offer in Signal Hill

Vinyl comes in privacy and semi-privacy, picket styles, pool enclosures and ranch-style rail for larger lots. Aluminum runs the same three, privacy, semi-privacy, picket, with gates made to match. Wall toppers suit this ground too, adding height to an existing block wall with nothing torn down.

Building for Wind, Slope and Salt Air

A hilltop lot rarely sits level, so panels get racked to follow the grade instead of stepping down it. For wind, vinyl privacy sections can take a metal insert: it looks like vinyl from the yard, but there is metal framing inside the rail, built to take realistic gusts off the hill.

Aluminum’s coating holds up well generally, though saltwater and coastal exposure are excluded from the manufacturer’s aluminum warranty, so vinyl is the steadier call for a yard that catches ocean air directly and needs little upkeep beyond a rinse.

Permits and Height Rules in Signal Hill

Fences in required front yards top out at 4 feet under the general code, or up to 6 feet in some zoning areas if the fence sits back at least 4 feet from the property line. Side and rear yards allow 6 feet, and corner lots carry a 3 foot limit inside the sight triangle near the intersection.

Unlike many nearby cities, Signal Hill requires a building permit for a fence at any height. Grade differences on a sloped lot can also justify extra height, up to 10 feet, under a site-specific exception. Rules shift by zone and lot, so verify specifics with the Signal Hill Planning and Building Department before finalizing a design.

What Shapes Your Fencing Cost

The final number comes down to footage, the height you choose, material choice between vinyl and aluminum, how many gates the layout needs, whether the ground is sloped enough to require extra racking, and whether an old fence needs removing before the new one can go in. A free on-site estimate gets you a real figure instead of a guess made over the phone before anything is scheduled.

Two Palettes, One Hill

There is no good side and bad side to a fence like this. Vinyl carries its color all the way through, and the metal finish is fused on, so the street face matches the one you look at. Below, vinyl runs long and metal does not.

Vinyl by Family

How close will anyone stand? Within a few feet, the six smooth wood grains and the four textured blends show their relief. From the road that flattens out, and the four plain solids do the same job with nothing extra.

• White
• Tan
• Clay
• Gray
• Coastal Cedar
• Dark Walnut
• Dark Sequoia
• Weathered Aspen
• Mesquite
• Slate Gray
• Arctic Blend
• Brazilian Blend
• Sierra Blend
• Weathered Blend

Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.

The Aluminum Set

Nobody goes back over a finish like this one. Powder is laid on dry, then cured under heat until it belongs to the metal. Black, white and Wood Grain reach the panels and slats; on contoured slats matte black is the whole answer.

• Black
• WoodGrain
• White

Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.

Height on an Exposed Hill

Nobody up here gets to skip the wind question. Past a certain height, or on a site that takes the gusts, a concealed steel insert runs inside the aluminum post. The rest comes down to style, yard, and the ceiling this city sets.