Vinyl Fence Installation
Full-service installation: old fence hauled away, footings dug, and panels racked true to your yard’s slope.
Call Now: (844) 744-0707
Your South Pasadena fence gets built to fit a compact, established lot near the Arroyo Seco, in custom vinyl or aluminum sized to match the block.
Licensed since 2018 and locally established, our crew stands behind every vinyl install with a transferable limited lifetime warranty.


From tight historic lots to wider ones, our crew builds and installs both materials throughout South Pasadena.
Lot width, setback lines and how much privacy the street calls for all shape which material and height fit best. Browse the styles below, then send over your address for a free on-site visit and a same-day answer.
Vinyl suits the tree-lined lots along Fair Oaks Avenue and Mission Street as well as it does the wider parcels near San Marino. Privacy panels lock tongue-and-groove with no gap, picket runs keep the open look many of the city’s older streets already carry, ranch rail suits wider side yards, and pool enclosures meet the state barrier code with a self-latching gate.
The color is blended straight into the vinyl instead of painted on afterward, so more than ten colors and ten styles keep their finish without flashing white at a scratch or yellowing in the sun. Heights run custom from 2 to 8 ft, racked to the lot’s grade, with upkeep limited to a rinse twice a year.
For a cleaner, architectural look, our aluminum line covers privacy, semi-privacy and picket styles, with slats that shut for full privacy or stay open for airflow, in black, white or a wood-grain finish.
The coating carries an ASTM E84 Class A flame and smoke rating, and the material is warranted for 20 years, the coating for 10, steel components for 2, plus our own 5-year workmanship on top. Gates come in single, driveway and rolling configurations to match whichever style you choose.
Every style ships with a matching gate, sized from a narrow walk-through to a full driveway span with extra framing built in so it holds true and takes an automation kit later if you want one.
A wall topper sets right on an existing block or concrete wall near the Arroyo Seco, adding height and screening without a teardown. Small jobs and odd angles, common on South Pasadena’s older lots, are work we take on, from a single gate swap to an awkward side yard nobody else wants to quote.
Footage, height, material choice, gate count and site grading all move the final price, and removing an existing fence first is its own separate factor.
On the compact, established lots common near Fremont Avenue and Huntington Drive, setback lines can also affect placement, one more reason a phone guess only ever gets you a rough ballpark. A real number comes from a free, on-site, no-obligation visit, typically answered the same business day it comes in.

For South Pasadena homes we build in vinyl and aluminum both: backyard privacy panels, open picket runs, ranch rail, pool-code enclosures, and gates made to match whatever they hang beside.
The house here usually predates the fence by decades, so the fence is the piece that has to join in. Take the swatches outside and hold them against brick, paint and trim. Vinyl gives you room to hunt; aluminum answers quickly.
Warmth is what an older elevation usually asks for, so the wood grain group and the textured blends come up first here. Six shades in one, four in the other. Four plain solids stay behind them for a run that should keep quiet.
Pro Vinyl and Aluminum Fencing partners with Catalyst, one of the leading vinyl fence manufacturers in the United States. Their US-made vinyl, our custom fabrication and installation, backed by a transferable limited lifetime material warranty.
Expect less range here, and no custom colors at all. Picket, panel and semi-privacy lines carry black, white or a wood-look tone. Contoured slats stop at matte black. Every one is powder, fused by heat, so repainting never comes up.
Pro Vinyl and Aluminum Fencing is a trained and authorized SLEEKFENCE™ contractor. SLEEKFENCE™ is a premium-class aluminum fencing brand registered in the USA – their engineered material, our custom fabrication and welded install, with a 20-year material warranty behind it.
Lot width moves around a lot in this city, and a number that suits a wide rear boundary can be wrong on a narrow historic frontage. Read each row as a ceiling for that style. The city’s limit sits over all of them.
| Fence style | Min | Max |
|---|---|---|
| Vinyl privacy | 4 ft | 8 ft |
| Vinyl privacy w/Accent top | 5 ft | 8 ft |
| Vinyl picket | 3.5 ft | 6 ft |
| Vinyl wall topper | 2 ft | 3 ft |
| Aluminum privacy | 4 ft | 12 ft |
| Aluminum semi-privacy | 4 ft | 12 ft |
| Aluminum privacy hybrid | 4 ft | 12 ft |
| Aluminum wall topper | 2 ft | 4 ft |
Every photo here shows a vinyl or aluminum fence finished in and around South Pasadena, from tight lots off Fair Oaks Avenue to wider parcels near Huntington Drive. None of it is stock photography, so panel style, color and gate hardware match your block.
South Pasadena is an incorporated city in Los Angeles County, home to about 26,943 residents in the West San Gabriel Valley, roughly 12 miles northeast of downtown Los Angeles.
Fair Oaks Avenue, Huntington Drive, Fremont Avenue and Mission Street carry most local traffic, and the Arroyo Seco, a tributary of the Los Angeles River, runs along the city’s east side, crossed by the Arroyo Seco Parkway near its Orange Grove Avenue and Fair Oaks Avenue exits. To the north sits Pasadena; Los Angeles wraps the west and south; San Marino borders the east, with Alhambra just beyond to the southeast.
The city sits at roughly 659 ft elevation along the Arroyo Seco drainage, and lots near the arroyo can carry more runoff and softer ground during the wet season than blocks farther from the channel. That can change how deep a post footing needs to go, one reason an estimate happens on-site rather than over the phone.
Many South Pasadena parcels are smaller and more tightly set than newer suburban tracts, with fences sitting close to setback lines along streets like Fremont Avenue. A precise measurement matters more here than on a wide-open lot, since a few inches of error can put a panel over a property line.
South Pasadena Municipal Code Title 36 sets front yard fences at 3 ft within the required setback. Side and rear lines top out at 6 ft, stretching to 8 ft with administrative approval. Permit thresholds for standard residential fence heights are not spelled out in the public zoning text, so a call to the South Pasadena Planning Division is how a homeowner nails down what applies before starting work.
A South Pasadena fence job runs through four clear stages, from an on-site measurement near Mission Street through to a signed warranty on the finished panel line, and every step stays visible before the next one starts.
Nothing about scope or price changes once the crew starts digging; that gets nailed down in the contract first.
A team member walks the property near Mission Street, measures each run and gives you a real number on the spot.
Everything, from panel material to gate count and finish color, goes into a written contract before work begins.
Posts go in first, set plumb to the yard’s grade, then panels and gates follow before the old fence is hauled off.
Aluminum’s 20/10/2-year terms, vinyl’s lifetime coverage, and our 5-year workmanship all get handed over in writing.

Practical reads on materials, permits and upkeep, written for homeowners across South Pasadena.
Horizontal picket fencing swaps the classic upright slats for a sideways run with a more modern look.
Fences blog
South Pasadena Fencing Questions, Answered Directly
Permits, historic lot lines, HOA rules near San Marino, tight setbacks and which streets we reach: this covers what most South Pasadena callers want to know before booking, whether the lot sits near Fair Oaks or Fremont. Direct answers below, no sales pitch attached.
Have a Question for Us?
Call or send a message; a real person replies, same business day.
South Pasadena’s zoning code sets fence heights but does not spell out a specific permit threshold for standard residential fences in the sections reviewed.
Treat any fence project as permit-possible and confirm requirements with the South Pasadena Planning Division before work starts.
South Pasadena Municipal Code Title 36 caps front yard fences at 3 ft within the required setback.
A 6 ft limit applies along side and rear lines, rising to 8 ft with administrative approval. Confirm your lot’s exact setback lines with the Planning Division before finalizing a design.
Lots closer to the Arroyo Seco can hold softer ground and more runoff during the wet season than blocks farther from the channel, which can change how deep a post footing needs to go.
That is one reason estimates happen on-site rather than by phone.
Some South Pasadena communities carry HOA rules layered on top of the municipal code, and those CC&Rs can be tighter on height, color or style than the city allows on its own.
Check your HOA paperwork before finalizing a design.
Not usually. South Pasadena’s tighter, established parcels still carry setback and property-line rules under Title 36, and a few inches of error can put a panel over the line.
A precise on-site measurement settles it before work starts.
Alongside South Pasadena, we reach neighboring Pasadena, Los Angeles, San Marino and Alhambra. A same-business-day reply follows any free, on-site, no-obligation estimate request.